STM32L552 · level reference · 127 min read

Appendix A15. STM32L5 register maps

The STM32L5 series: Cortex-M33 up to 110 MHz — the L4 with TrustZone. Registers and bits of the main blocks come from the STM32L552 header, made by the same generator as the F1 and F4 maps: offsets from the *_TypeDef structures, register purposes and bit descriptions from the header comments. Blocks the series lacks are left out. For low power, see PWR (sleep modes), RCC (the LSE/LSI/MSI oscillators), LPTIM and LPUART — they keep working in sleep. The handbook sections are written for the F103 and F407; register and bit names are mostly the same across series — the map helps move code over and see what is arranged differently.

How to read: the offset is from the block's base address; 31:16 is a bit field from 16 to 31; a single number is a single bit. The number in brackets in a block heading is the section where the block is covered.

STM32L552 peripherals by bus: bus bases and the appendix block offsets, as in a debugger window

RCC — Clocks (section 6)

Register	Offset	Bits	Purpose
`CR`	`0x00`	32	RCC clock control register
`RCC_CR_MSION`		0	Internal Multi Speed oscillator (MSI) clock enable
`RCC_CR_MSIRDY`		1	Internal Multi Speed oscillator (MSI) clock ready flag
`RCC_CR_MSIPLLEN`		2	Internal Multi Speed oscillator (MSI) PLL enable
`RCC_CR_MSIRGSEL`		3	Internal Multi Speed oscillator (MSI) range selection
`RCC_CR_MSIRANGE`		4:7	Internal Multi Speed oscillator (MSI) clock Range
`RCC_CR_HSION`		8	Internal High Speed oscillator (HSI16) clock enable
`RCC_CR_HSIKERON`		9	Internal High Speed oscillator (HSI16) clock enable for some IPs Kernel
`RCC_CR_HSIRDY`		10	Internal High Speed oscillator (HSI16) clock ready flag
`RCC_CR_HSIASFS`		11	HSI16 Automatic Start from Stop
`RCC_CR_HSEON`		16	External High Speed oscillator (HSE) clock enable
`RCC_CR_HSERDY`		17	External High Speed oscillator (HSE) clock ready
`RCC_CR_HSEBYP`		18	External High Speed oscillator (HSE) clock bypass
`RCC_CR_CSSON`		19	HSE Clock Security System enable
`RCC_CR_PLLON`		24	System PLL clock enable
`RCC_CR_PLLRDY`		25	System PLL clock ready
`RCC_CR_PLLSAI1ON`		26	SAI1 PLL enable
`RCC_CR_PLLSAI1RDY`		27	SAI1 PLL ready
`RCC_CR_PLLSAI2ON`		28	SAI2 PLL enable
`RCC_CR_PLLSAI2RDY`		29	SAI2 PLL ready
`RCC_CR_PRIV`		31	RCC Privilege enable
`ICSCR`	`0x04`	32	RCC internal clock sources calibration register
`RCC_ICSCR_MSICAL`		0:7	MSICAL[7:0] bits
`RCC_ICSCR_MSITRIM`		8:15	MSITRIM[7:0] bits
`RCC_ICSCR_HSICAL`		16:23	HSICAL[7:0] bits
`RCC_ICSCR_HSITRIM`		24:30	HSITRIM[6:0] bits
`CFGR`	`0x08`	32	RCC clock configuration register
`RCC_CFGR_SW`		0:1	SW[1:0] bits (System clock Switch)
`RCC_CFGR_SWS`		2:3	SWS[1:0] bits (System Clock Switch Status)
`RCC_CFGR_HPRE`		4:7	HPRE[3:0] bits (AHB prescaler)
`RCC_CFGR_PPRE1`		8:10	PRE1[2:0] bits (APB2 prescaler)
`RCC_CFGR_PPRE2`		11:13	PRE2[2:0] bits (APB2 prescaler)
`RCC_CFGR_STOPWUCK`		15	Wake Up from stop and CSS backup clock selection
`RCC_CFGR_MCOSEL`		24:27	MCOSEL [3:0] bits (Clock output selection)
`RCC_CFGR_MCOPRE`		28:30	MCO prescaler
`PLLCFGR`	`0x0C`	32	RCC system PLL configuration register
`RCC_PLLCFGR_PLLSRC`		0:1
`RCC_PLLCFGR_PLLM`		4:7
`RCC_PLLCFGR_PLLN`		8:14
`RCC_PLLCFGR_PLLPEN`		16
`RCC_PLLCFGR_PLLP`		17
`RCC_PLLCFGR_PLLQEN`		20
`RCC_PLLCFGR_PLLQ`		21:22
`RCC_PLLCFGR_PLLREN`		24
`RCC_PLLCFGR_PLLR`		25:26
`RCC_PLLCFGR_PLLPDIV`		27:31
`PLLSAI1CFGR`	`0x10`	32	RCC PLL SAI1 configuration register
`RCC_PLLSAI1CFGR_PLLSAI1SRC`		0:1
`RCC_PLLSAI1CFGR_PLLSAI1M`		4:7
`RCC_PLLSAI1CFGR_PLLSAI1N`		8:14
`RCC_PLLSAI1CFGR_PLLSAI1PEN`		16
`RCC_PLLSAI1CFGR_PLLSAI1P`		17
`RCC_PLLSAI1CFGR_PLLSAI1QEN`		20
`RCC_PLLSAI1CFGR_PLLSAI1Q`		21:22
`RCC_PLLSAI1CFGR_PLLSAI1REN`		24
`RCC_PLLSAI1CFGR_PLLSAI1R`		25:26
`RCC_PLLSAI1CFGR_PLLSAI1PDIV`		27:31
`PLLSAI2CFGR`	`0x14`	32	RCC PLL SAI2 configuration register
`RCC_PLLSAI2CFGR_PLLSAI2SRC`		0:1
`RCC_PLLSAI2CFGR_PLLSAI2M`		4:7
`RCC_PLLSAI2CFGR_PLLSAI2N`		8:14
`RCC_PLLSAI2CFGR_PLLSAI2PEN`		16
`RCC_PLLSAI2CFGR_PLLSAI2P`		17
`RCC_PLLSAI2CFGR_PLLSAI2PDIV`		27:31
`CIER`	`0x18`	32	RCC clock interrupt enable register
`RCC_CIER_LSIRDYIE`		0
`RCC_CIER_LSERDYIE`		1
`RCC_CIER_MSIRDYIE`		2
`RCC_CIER_HSIRDYIE`		3
`RCC_CIER_HSERDYIE`		4
`RCC_CIER_PLLRDYIE`		5
`RCC_CIER_PLLSAI1RDYIE`		6
`RCC_CIER_PLLSAI2RDYIE`		7
`RCC_CIER_HSI48RDYIE`		10
`CIFR`	`0x1C`	32	RCC clock interrupt flag register
`RCC_CIFR_LSIRDYF`		0
`RCC_CIFR_LSERDYF`		1
`RCC_CIFR_MSIRDYF`		2
`RCC_CIFR_HSIRDYF`		3
`RCC_CIFR_HSERDYF`		4
`RCC_CIFR_PLLRDYF`		5
`RCC_CIFR_PLLSAI1RDYF`		6
`RCC_CIFR_PLLSAI2RDYF`		7
`RCC_CIFR_CSSF`		8
`RCC_CIFR_HSI48RDYF`		10
`CICR`	`0x20`	32	RCC clock interrupt clear register
`RCC_CICR_LSIRDYC`		0
`RCC_CICR_LSERDYC`		1
`RCC_CICR_MSIRDYC`		2
`RCC_CICR_HSIRDYC`		3
`RCC_CICR_HSERDYC`		4
`RCC_CICR_PLLRDYC`		5
`RCC_CICR_PLLSAI1RDYC`		6
`RCC_CICR_PLLSAI2RDYC`		7
`RCC_CICR_CSSC`		8
`RCC_CICR_HSI48RDYC`		10
`AHB1RSTR`	`0x28`	32	RCC AHB1 peripheral reset register
`RCC_AHB1RSTR_DMA1RST`		0
`RCC_AHB1RSTR_DMA2RST`		1
`RCC_AHB1RSTR_DMAMUX1RST`		2
`RCC_AHB1RSTR_FLASHRST`		8
`RCC_AHB1RSTR_CRCRST`		12
`RCC_AHB1RSTR_TSCRST`		16
`AHB2RSTR`	`0x2C`	32	RCC AHB2 peripheral reset register
`RCC_AHB2RSTR_GPIOARST`		0
`RCC_AHB2RSTR_GPIOBRST`		1
`RCC_AHB2RSTR_GPIOCRST`		2
`RCC_AHB2RSTR_GPIODRST`		3
`RCC_AHB2RSTR_GPIOERST`		4
`RCC_AHB2RSTR_GPIOFRST`		5
`RCC_AHB2RSTR_GPIOGRST`		6
`RCC_AHB2RSTR_GPIOHRST`		7
`RCC_AHB2RSTR_ADCRST`		13
`RCC_AHB2RSTR_HASHRST`		17
`RCC_AHB2RSTR_RNGRST`		18
`RCC_AHB2RSTR_SDMMC1RST`		22
`AHB3RSTR`	`0x30`	32	RCC AHB3 peripheral reset register
`RCC_AHB3RSTR_FMCRST`		0
`RCC_AHB3RSTR_OSPI1RST`		8
`APB1RSTR1`	`0x38`	32	RCC APB1 peripheral reset register 1
`RCC_APB1RSTR1_TIM2RST`		0
`RCC_APB1RSTR1_TIM3RST`		1
`RCC_APB1RSTR1_TIM4RST`		2
`RCC_APB1RSTR1_TIM5RST`		3
`RCC_APB1RSTR1_TIM6RST`		4
`RCC_APB1RSTR1_TIM7RST`		5
`RCC_APB1RSTR1_SPI2RST`		14
`RCC_APB1RSTR1_SPI3RST`		15
`RCC_APB1RSTR1_USART2RST`		17
`RCC_APB1RSTR1_USART3RST`		18
`RCC_APB1RSTR1_UART4RST`		19
`RCC_APB1RSTR1_UART5RST`		20
`RCC_APB1RSTR1_I2C1RST`		21
`RCC_APB1RSTR1_I2C2RST`		22
`RCC_APB1RSTR1_I2C3RST`		23
`RCC_APB1RSTR1_CRSRST`		24
`RCC_APB1RSTR1_PWRRST`		28
`RCC_APB1RSTR1_DAC1RST`		29
`RCC_APB1RSTR1_OPAMPRST`		30
`RCC_APB1RSTR1_LPTIM1RST`		31
`APB1RSTR2`	`0x3C`	32	RCC APB1 peripheral reset register 2
`RCC_APB1RSTR2_LPUART1RST`		0
`RCC_APB1RSTR2_I2C4RST`		1
`RCC_APB1RSTR2_LPTIM2RST`		5
`RCC_APB1RSTR2_LPTIM3RST`		6
`RCC_APB1RSTR2_FDCAN1RST`		9
`RCC_APB1RSTR2_USBFSRST`		21
`RCC_APB1RSTR2_UCPD1RST`		23
`APB2RSTR`	`0x40`	32	RCC APB2 peripheral reset register
`RCC_APB2RSTR_SYSCFGRST`		0
`RCC_APB2RSTR_TIM1RST`		11
`RCC_APB2RSTR_SPI1RST`		12
`RCC_APB2RSTR_TIM8RST`		13
`RCC_APB2RSTR_USART1RST`		14
`RCC_APB2RSTR_TIM15RST`		16
`RCC_APB2RSTR_TIM16RST`		17
`RCC_APB2RSTR_TIM17RST`		18
`RCC_APB2RSTR_SAI1RST`		21
`RCC_APB2RSTR_SAI2RST`		22
`RCC_APB2RSTR_DFSDM1RST`		24
`AHB1ENR`	`0x48`	32	RCC AHB1 peripheral clocks enable register
`RCC_AHB1ENR_DMA1EN`		0
`RCC_AHB1ENR_DMA2EN`		1
`RCC_AHB1ENR_DMAMUX1EN`		2
`RCC_AHB1ENR_FLASHEN`		8
`RCC_AHB1ENR_CRCEN`		12
`RCC_AHB1ENR_TSCEN`		16
`RCC_AHB1ENR_GTZCEN`		22
`AHB2ENR`	`0x4C`	32	RCC AHB2 peripheral clocks enable register
`RCC_AHB2ENR_GPIOAEN`		0
`RCC_AHB2ENR_GPIOBEN`		1
`RCC_AHB2ENR_GPIOCEN`		2
`RCC_AHB2ENR_GPIODEN`		3
`RCC_AHB2ENR_GPIOEEN`		4
`RCC_AHB2ENR_GPIOFEN`		5
`RCC_AHB2ENR_GPIOGEN`		6
`RCC_AHB2ENR_GPIOHEN`		7
`RCC_AHB2ENR_ADCEN`		13
`RCC_AHB2ENR_HASHEN`		17
`RCC_AHB2ENR_RNGEN`		18
`RCC_AHB2ENR_SDMMC1EN`		22
`AHB3ENR`	`0x50`	32	RCC AHB3 peripheral clocks enable register
`RCC_AHB3ENR_FMCEN`		0
`RCC_AHB3ENR_OSPI1EN`		8
`APB1ENR1`	`0x58`	32	RCC APB1 peripheral clocks enable register 1
`RCC_APB1ENR1_TIM2EN`		0
`RCC_APB1ENR1_TIM3EN`		1
`RCC_APB1ENR1_TIM4EN`		2
`RCC_APB1ENR1_TIM5EN`		3
`RCC_APB1ENR1_TIM6EN`		4
`RCC_APB1ENR1_TIM7EN`		5
`RCC_APB1ENR1_RTCAPBEN`		10
`RCC_APB1ENR1_WWDGEN`		11
`RCC_APB1ENR1_SPI2EN`		14
`RCC_APB1ENR1_SPI3EN`		15
`RCC_APB1ENR1_USART2EN`		17
`RCC_APB1ENR1_USART3EN`		18
`RCC_APB1ENR1_UART4EN`		19
`RCC_APB1ENR1_UART5EN`		20
`RCC_APB1ENR1_I2C1EN`		21
`RCC_APB1ENR1_I2C2EN`		22
`RCC_APB1ENR1_I2C3EN`		23
`RCC_APB1ENR1_CRSEN`		24
`RCC_APB1ENR1_PWREN`		28
`RCC_APB1ENR1_DAC1EN`		29
`RCC_APB1ENR1_OPAMPEN`		30
`RCC_APB1ENR1_LPTIM1EN`		31
`APB1ENR2`	`0x5C`	32	RCC APB1 peripheral clocks enable register 2
`RCC_APB1ENR2_LPUART1EN`		0
`RCC_APB1ENR2_I2C4EN`		1
`RCC_APB1ENR2_LPTIM2EN`		5
`RCC_APB1ENR2_LPTIM3EN`		6
`RCC_APB1ENR2_FDCAN1EN`		9
`RCC_APB1ENR2_USBFSEN`		21
`RCC_APB1ENR2_UCPD1EN`		23
`APB2ENR`	`0x60`	32	RCC APB2 peripheral clocks enable register
`RCC_APB2ENR_SYSCFGEN`		0
`RCC_APB2ENR_TIM1EN`		11
`RCC_APB2ENR_SPI1EN`		12
`RCC_APB2ENR_TIM8EN`		13
`RCC_APB2ENR_USART1EN`		14
`RCC_APB2ENR_TIM15EN`		16
`RCC_APB2ENR_TIM16EN`		17
`RCC_APB2ENR_TIM17EN`		18
`RCC_APB2ENR_SAI1EN`		21
`RCC_APB2ENR_SAI2EN`		22
`RCC_APB2ENR_DFSDM1EN`		24
`AHB1SMENR`	`0x68`	32	RCC AHB1 peripheral clocks enable in sleep and stop modes register
`RCC_AHB1SMENR_DMA1SMEN`		0
`RCC_AHB1SMENR_DMA2SMEN`		1
`RCC_AHB1SMENR_DMAMUX1SMEN`		2
`RCC_AHB1SMENR_FLASHSMEN`		8
`RCC_AHB1SMENR_SRAM1SMEN`		9
`RCC_AHB1SMENR_CRCSMEN`		12
`RCC_AHB1SMENR_TSCSMEN`		16
`RCC_AHB1SMENR_ICACHESMEN`		21:22
`RCC_AHB1SMENR_GTZCSMEN`		22
`AHB2SMENR`	`0x6C`	32	RCC AHB2 peripheral clocks enable in sleep and stop modes register
`RCC_AHB2SMENR_GPIOASMEN`		0
`RCC_AHB2SMENR_GPIOBSMEN`		1
`RCC_AHB2SMENR_GPIOCSMEN`		2
`RCC_AHB2SMENR_GPIODSMEN`		3
`RCC_AHB2SMENR_GPIOESMEN`		4
`RCC_AHB2SMENR_GPIOFSMEN`		5
`RCC_AHB2SMENR_GPIOGSMEN`		6
`RCC_AHB2SMENR_GPIOHSMEN`		7
`RCC_AHB2SMENR_SRAM2SMEN`		9
`RCC_AHB2SMENR_ADCSMEN`		13
`RCC_AHB2SMENR_HASHSMEN`		17
`RCC_AHB2SMENR_RNGSMEN`		18
`RCC_AHB2SMENR_SDMMC1SMEN`		22
`AHB3SMENR`	`0x70`	32	RCC AHB3 peripheral clocks enable in sleep and stop modes register
`RCC_AHB3SMENR_FMCSMEN`		0
`RCC_AHB3SMENR_OSPI1SMEN`		8
`APB1SMENR1`	`0x78`	32	RCC APB1 peripheral clocks enable in sleep mode and stop modes register 1
`RCC_APB1SMENR1_TIM2SMEN`		0
`RCC_APB1SMENR1_TIM3SMEN`		1
`RCC_APB1SMENR1_TIM4SMEN`		2
`RCC_APB1SMENR1_TIM5SMEN`		3
`RCC_APB1SMENR1_TIM6SMEN`		4
`RCC_APB1SMENR1_TIM7SMEN`		5
`RCC_APB1SMENR1_RTCAPBSMEN`		10
`RCC_APB1SMENR1_WWDGSMEN`		11
`RCC_APB1SMENR1_SPI2SMEN`		14
`RCC_APB1SMENR1_SPI3SMEN`		15
`RCC_APB1SMENR1_USART2SMEN`		17
`RCC_APB1SMENR1_USART3SMEN`		18
`RCC_APB1SMENR1_UART4SMEN`		19
`RCC_APB1SMENR1_UART5SMEN`		20
`RCC_APB1SMENR1_I2C1SMEN`		21
`RCC_APB1SMENR1_I2C2SMEN`		22
`RCC_APB1SMENR1_I2C3SMEN`		23
`RCC_APB1SMENR1_CRSSMEN`		24
`RCC_APB1SMENR1_PWRSMEN`		28
`RCC_APB1SMENR1_DAC1SMEN`		29
`RCC_APB1SMENR1_OPAMPSMEN`		30
`RCC_APB1SMENR1_LPTIM1SMEN`		31
`APB1SMENR2`	`0x7C`	32	RCC APB1 peripheral clocks enable in sleep mode and stop modes register 2
`RCC_APB1SMENR2_LPUART1SMEN`		0
`RCC_APB1SMENR2_I2C4SMEN`		1
`RCC_APB1SMENR2_LPTIM2SMEN`		5
`RCC_APB1SMENR2_LPTIM3SMEN`		6
`RCC_APB1SMENR2_FDCAN1SMEN`		9
`RCC_APB1SMENR2_USBFSSMEN`		21
`RCC_APB1SMENR2_UCPD1SMEN`		23
`APB2SMENR`	`0x80`	32	RCC APB2 peripheral clocks enable in sleep mode and stop modes register
`RCC_APB2SMENR_SYSCFGSMEN`		0
`RCC_APB2SMENR_TIM1SMEN`		11
`RCC_APB2SMENR_SPI1SMEN`		12
`RCC_APB2SMENR_TIM8SMEN`		13
`RCC_APB2SMENR_USART1SMEN`		14
`RCC_APB2SMENR_TIM15SMEN`		16
`RCC_APB2SMENR_TIM16SMEN`		17
`RCC_APB2SMENR_TIM17SMEN`		18
`RCC_APB2SMENR_SAI1SMEN`		21
`RCC_APB2SMENR_SAI2SMEN`		22
`RCC_APB2SMENR_DFSDM1SMEN`		24
`CCIPR1`	`0x88`	32	RCC peripherals independent clock configuration register 1
`RCC_CCIPR1_USART1SEL`		0:1
`RCC_CCIPR1_USART2SEL`		2:3
`RCC_CCIPR1_USART3SEL`		4:5
`RCC_CCIPR1_UART4SEL`		6:7
`RCC_CCIPR1_UART5SEL`		8:9
`RCC_CCIPR1_LPUART1SEL`		10:11
`RCC_CCIPR1_I2C1SEL`		12:13
`RCC_CCIPR1_I2C2SEL`		14:15
`RCC_CCIPR1_I2C3SEL`		16:17
`RCC_CCIPR1_LPTIM1SEL`		18:19
`RCC_CCIPR1_LPTIM2SEL`		20:21
`RCC_CCIPR1_LPTIM3SEL`		22:23
`RCC_CCIPR1_FDCANSEL`		24:25
`RCC_CCIPR1_CLK48MSEL`		26:27
`RCC_CCIPR1_ADCSEL`		28:29
`BDCR`	`0x90`	32	RCC backup domain control register
`RCC_BDCR_LSEON`		0
`RCC_BDCR_LSERDY`		1
`RCC_BDCR_LSEBYP`		2
`RCC_BDCR_LSEDRV`		3:4
`RCC_BDCR_LSECSSON`		5
`RCC_BDCR_LSECSSD`		6
`RCC_BDCR_LSESYSEN`		7
`RCC_BDCR_RTCSEL`		8:9
`RCC_BDCR_LSESYSRDY`		11
`RCC_BDCR_RTCEN`		15
`RCC_BDCR_BDRST`		16
`RCC_BDCR_LSCOEN`		24
`RCC_BDCR_LSCOSEL`		25
`CSR`	`0x94`	32	RCC clock control & status register
`RCC_CSR_LSION`		0
`RCC_CSR_LSIRDY`		1
`RCC_CSR_LSIPRE`		4
`RCC_CSR_MSISRANGE`		8:11
`RCC_CSR_RMVF`		23
`RCC_CSR_OBLRSTF`		25
`RCC_CSR_PINRSTF`		26
`RCC_CSR_BORRSTF`		27
`RCC_CSR_SFTRSTF`		28
`RCC_CSR_IWDGRSTF`		29
`RCC_CSR_WWDGRSTF`		30
`RCC_CSR_LPWRRSTF`		31
`CRRCR`	`0x98`	32	RCC clock recovery RC register
`RCC_CRRCR_HSI48ON`		0
`RCC_CRRCR_HSI48RDY`		1	HSI48CAL configuration
`RCC_CRRCR_HSI48CAL`		7:15	HSI48CAL[8:0] bits
`CCIPR2`	`0x9C`	32	RCC peripherals independent clock configuration register 2
`RCC_CCIPR2_I2C4SEL`		0:1
`RCC_CCIPR2_DFSDMSEL`		2
`RCC_CCIPR2_ADFSDMSEL`		3:4
`RCC_CCIPR2_SAI1SEL`		5:7
`RCC_CCIPR2_SAI2SEL`		8:10
`RCC_CCIPR2_SDMMCSEL`		14
`RCC_CCIPR2_OSPISEL`		20:21
`SECCFGR`	`0xB8`	32	RCC secure configuration register
`RCC_SECCFGR_HSISEC`		0
`RCC_SECCFGR_HSESEC`		1
`RCC_SECCFGR_MSISEC`		2
`RCC_SECCFGR_LSISEC`		3
`RCC_SECCFGR_LSESEC`		4
`RCC_SECCFGR_SYSCLKSEC`		5
`RCC_SECCFGR_PRESCSEC`		6
`RCC_SECCFGR_PLLSEC`		7
`RCC_SECCFGR_PLLSAI1SEC`		8
`RCC_SECCFGR_PLLSAI2SEC`		9
`RCC_SECCFGR_CLK48MSEC`		10
`RCC_SECCFGR_HSI48SEC`		11
`RCC_SECCFGR_RMVFSEC`		12
`SECSR`	`0xBC`	32	RCC secure status register
`RCC_SECSR_HSISECF`		0
`RCC_SECSR_HSESECF`		1
`RCC_SECSR_MSISECF`		2
`RCC_SECSR_LSISECF`		3
`RCC_SECSR_LSESECF`		4
`RCC_SECSR_SYSCLKSECF`		5
`RCC_SECSR_PRESCSECF`		6
`RCC_SECSR_PLLSECF`		7
`RCC_SECSR_PLLSAI1SECF`		8
`RCC_SECSR_PLLSAI2SECF`		9
`RCC_SECSR_CLK48MSECF`		10
`RCC_SECSR_HSI48SECF`		11
`RCC_SECSR_RMVFSECF`		12
`AHB1SECSR`	`0xE8`	32	RCC AHB1 security status register
`RCC_AHB1SECSR_DMA1SECF`		0
`RCC_AHB1SECSR_DMA2SECF`		1
`RCC_AHB1SECSR_DMAMUX1SECF`		2
`RCC_AHB1SECSR_FLASHSECF`		8
`RCC_AHB1SECSR_SRAM1SECF`		9
`RCC_AHB1SECSR_CRCSECF`		12
`RCC_AHB1SECSR_TSCSECF`		16
`RCC_AHB1SECSR_ICACHESECF`		21:22
`RCC_AHB1SECSR_GTZCSECF`		22
`AHB2SECSR`	`0xEC`	32	RCC AHB2 security status register
`RCC_AHB2SECSR_GPIOASECF`		0
`RCC_AHB2SECSR_GPIOBSECF`		1
`RCC_AHB2SECSR_GPIOCSECF`		2
`RCC_AHB2SECSR_GPIODSECF`		3
`RCC_AHB2SECSR_GPIOESECF`		4
`RCC_AHB2SECSR_GPIOFSECF`		5
`RCC_AHB2SECSR_GPIOGSECF`		6
`RCC_AHB2SECSR_GPIOHSECF`		7
`RCC_AHB2SECSR_SRAM2SECF`		9
`RCC_AHB2SECSR_ADCSECF`		13
`RCC_AHB2SECSR_HASHSECF`		17
`RCC_AHB2SECSR_RNGSECF`		18
`RCC_AHB2SECSR_SDMMC1SECF`		22
`AHB3SECSR`	`0xF0`	32	RCC AHB3 security status register
`RCC_AHB3SECSR_FMCSECF`		0
`RCC_AHB3SECSR_OSPI1SECF`		8
`APB1SECSR1`	`0xF8`	32	RCC APB1 security status register 1
`RCC_APB1SECSR1_TIM2SECF`		0
`RCC_APB1SECSR1_TIM3SECF`		1
`RCC_APB1SECSR1_TIM4SECF`		2
`RCC_APB1SECSR1_TIM5SECF`		3
`RCC_APB1SECSR1_TIM6SECF`		4
`RCC_APB1SECSR1_TIM7SECF`		5
`RCC_APB1SECSR1_RTCAPBSECF`		10
`RCC_APB1SECSR1_WWDGSECF`		11
`RCC_APB1SECSR1_SPI2SECF`		14
`RCC_APB1SECSR1_SPI3SECF`		15
`RCC_APB1SECSR1_USART2SECF`		17
`RCC_APB1SECSR1_USART3SECF`		18
`RCC_APB1SECSR1_UART4SECF`		19
`RCC_APB1SECSR1_UART5SECF`		20
`RCC_APB1SECSR1_I2C1SECF`		21
`RCC_APB1SECSR1_I2C2SECF`		22
`RCC_APB1SECSR1_I2C3SECF`		23
`RCC_APB1SECSR1_CRSSECF`		24
`RCC_APB1SECSR1_PWRSECF`		28
`RCC_APB1SECSR1_DAC1SECF`		29
`RCC_APB1SECSR1_OPAMPSECF`		30
`RCC_APB1SECSR1_LPTIM1SECF`		31
`APB1SECSR2`	`0xFC`	32	RCC APB1 security status register 2
`RCC_APB1SECSR2_LPUART1SECF`		0
`RCC_APB1SECSR2_I2C4SECF`		1
`RCC_APB1SECSR2_LPTIM2SECF`		5
`RCC_APB1SECSR2_LPTIM3SECF`		6
`RCC_APB1SECSR2_FDCAN1SECF`		9
`RCC_APB1SECSR2_USBFSSECF`		21
`RCC_APB1SECSR2_UCPD1SECF`		23
`APB2SECSR`	`0x100`	32	RCC APB2 security status register
`RCC_APB2SECSR_SYSCFGSECF`		0
`RCC_APB2SECSR_TIM1SECF`		11
`RCC_APB2SECSR_SPI1SECF`		12
`RCC_APB2SECSR_TIM8SECF`		13
`RCC_APB2SECSR_USART1SECF`		14
`RCC_APB2SECSR_TIM15SECF`		16
`RCC_APB2SECSR_TIM16SECF`		17
`RCC_APB2SECSR_TIM17SECF`		18
`RCC_APB2SECSR_SAI1SECF`		21
`RCC_APB2SECSR_SAI2SECF`		22
`RCC_APB2SECSR_DFSDM1SECF`		24

GPIO — I/O ports (section 8)

Register	Offset	Bits	Purpose
`MODER`	`0x00`	32	GPIO port mode register
`GPIO_MODER_MODE0`		0:1
`GPIO_MODER_MODE1`		2:3
`GPIO_MODER_MODE2`		4:5
`GPIO_MODER_MODE3`		6:7
`GPIO_MODER_MODE4`		8:9
`GPIO_MODER_MODE5`		10:11
`GPIO_MODER_MODE6`		12:13
`GPIO_MODER_MODE7`		14:15
`GPIO_MODER_MODE8`		16:17
`GPIO_MODER_MODE9`		18:19
`GPIO_MODER_MODE10`		20:21
`GPIO_MODER_MODE11`		22:23
`GPIO_MODER_MODE12`		24:25
`GPIO_MODER_MODE13`		26:27
`GPIO_MODER_MODE14`		28:29
`GPIO_MODER_MODE15`		30:31
`OTYPER`	`0x04`	32	GPIO port output type register
`GPIO_OTYPER_OT0`		0
`GPIO_OTYPER_OT1`		1
`GPIO_OTYPER_OT2`		2
`GPIO_OTYPER_OT3`		3
`GPIO_OTYPER_OT4`		4
`GPIO_OTYPER_OT5`		5
`GPIO_OTYPER_OT6`		6
`GPIO_OTYPER_OT7`		7
`GPIO_OTYPER_OT8`		8
`GPIO_OTYPER_OT9`		9
`GPIO_OTYPER_OT10`		10
`GPIO_OTYPER_OT11`		11
`GPIO_OTYPER_OT12`		12
`GPIO_OTYPER_OT13`		13
`GPIO_OTYPER_OT14`		14
`GPIO_OTYPER_OT15`		15
`OSPEEDR`	`0x08`	32	GPIO port output speed register
`GPIO_OSPEEDR_OSPEED0`		0:1
`GPIO_OSPEEDR_OSPEED1`		2:3
`GPIO_OSPEEDR_OSPEED2`		4:5
`GPIO_OSPEEDR_OSPEED3`		6:7
`GPIO_OSPEEDR_OSPEED4`		8:9
`GPIO_OSPEEDR_OSPEED5`		10:11
`GPIO_OSPEEDR_OSPEED6`		12:13
`GPIO_OSPEEDR_OSPEED7`		14:15
`GPIO_OSPEEDR_OSPEED8`		16:17
`GPIO_OSPEEDR_OSPEED9`		18:19
`GPIO_OSPEEDR_OSPEED10`		20:21
`GPIO_OSPEEDR_OSPEED11`		22:23
`GPIO_OSPEEDR_OSPEED12`		24:25
`GPIO_OSPEEDR_OSPEED13`		26:27
`GPIO_OSPEEDR_OSPEED14`		28:29
`GPIO_OSPEEDR_OSPEED15`		30:31
`PUPDR`	`0x0C`	32	GPIO port pull-up/pull-down register
`GPIO_PUPDR_PUPD0`		0:1
`GPIO_PUPDR_PUPD1`		2:3
`GPIO_PUPDR_PUPD2`		4:5
`GPIO_PUPDR_PUPD3`		6:7
`GPIO_PUPDR_PUPD4`		8:9
`GPIO_PUPDR_PUPD5`		10:11
`GPIO_PUPDR_PUPD6`		12:13
`GPIO_PUPDR_PUPD7`		14:15
`GPIO_PUPDR_PUPD8`		16:17
`GPIO_PUPDR_PUPD9`		18:19
`GPIO_PUPDR_PUPD10`		20:21
`GPIO_PUPDR_PUPD11`		22:23
`GPIO_PUPDR_PUPD12`		24:25
`GPIO_PUPDR_PUPD13`		26:27
`GPIO_PUPDR_PUPD14`		28:29
`GPIO_PUPDR_PUPD15`		30:31
`IDR`	`0x10`	32	GPIO port input data register
`GPIO_IDR_ID0`		0
`GPIO_IDR_ID1`		1
`GPIO_IDR_ID2`		2
`GPIO_IDR_ID3`		3
`GPIO_IDR_ID4`		4
`GPIO_IDR_ID5`		5
`GPIO_IDR_ID6`		6
`GPIO_IDR_ID7`		7
`GPIO_IDR_ID8`		8
`GPIO_IDR_ID9`		9
`GPIO_IDR_ID10`		10
`GPIO_IDR_ID11`		11
`GPIO_IDR_ID12`		12
`GPIO_IDR_ID13`		13
`GPIO_IDR_ID14`		14
`GPIO_IDR_ID15`		15
`ODR`	`0x14`	32	GPIO port output data register
`GPIO_ODR_OD0`		0
`GPIO_ODR_OD1`		1
`GPIO_ODR_OD2`		2
`GPIO_ODR_OD3`		3
`GPIO_ODR_OD4`		4
`GPIO_ODR_OD5`		5
`GPIO_ODR_OD6`		6
`GPIO_ODR_OD7`		7
`GPIO_ODR_OD8`		8
`GPIO_ODR_OD9`		9
`GPIO_ODR_OD10`		10
`GPIO_ODR_OD11`		11
`GPIO_ODR_OD12`		12
`GPIO_ODR_OD13`		13
`GPIO_ODR_OD14`		14
`GPIO_ODR_OD15`		15
`BSRR`	`0x18`	32	GPIO port bit set/reset register
`GPIO_BSRR_BS0`		0
`GPIO_BSRR_BS1`		1
`GPIO_BSRR_BS2`		2
`GPIO_BSRR_BS3`		3
`GPIO_BSRR_BS4`		4
`GPIO_BSRR_BS5`		5
`GPIO_BSRR_BS6`		6
`GPIO_BSRR_BS7`		7
`GPIO_BSRR_BS8`		8
`GPIO_BSRR_BS9`		9
`GPIO_BSRR_BS10`		10
`GPIO_BSRR_BS11`		11
`GPIO_BSRR_BS12`		12
`GPIO_BSRR_BS13`		13
`GPIO_BSRR_BS14`		14
`GPIO_BSRR_BS15`		15
`GPIO_BSRR_BR0`		16
`GPIO_BSRR_BR1`		17
`GPIO_BSRR_BR2`		18
`GPIO_BSRR_BR3`		19
`GPIO_BSRR_BR4`		20
`GPIO_BSRR_BR5`		21
`GPIO_BSRR_BR6`		22
`GPIO_BSRR_BR7`		23
`GPIO_BSRR_BR8`		24
`GPIO_BSRR_BR9`		25
`GPIO_BSRR_BR10`		26
`GPIO_BSRR_BR11`		27
`GPIO_BSRR_BR12`		28
`GPIO_BSRR_BR13`		29
`GPIO_BSRR_BR14`		30
`GPIO_BSRR_BR15`		31
`LCKR`	`0x1C`	32	GPIO port configuration lock register
`GPIO_LCKR_LCK0`		0
`GPIO_LCKR_LCK1`		1
`GPIO_LCKR_LCK2`		2
`GPIO_LCKR_LCK3`		3
`GPIO_LCKR_LCK4`		4
`GPIO_LCKR_LCK5`		5
`GPIO_LCKR_LCK6`		6
`GPIO_LCKR_LCK7`		7
`GPIO_LCKR_LCK8`		8
`GPIO_LCKR_LCK9`		9
`GPIO_LCKR_LCK10`		10
`GPIO_LCKR_LCK11`		11
`GPIO_LCKR_LCK12`		12
`GPIO_LCKR_LCK13`		13
`GPIO_LCKR_LCK14`		14
`GPIO_LCKR_LCK15`		15
`GPIO_LCKR_LCKK`		16
`AFR`+2×4	`0x20`	32	GPIO alternate function registers
`BRR`	`0x28`	32	GPIO Bit Reset register
`GPIO_BRR_BR0`		0
`GPIO_BRR_BR1`		1
`GPIO_BRR_BR2`		2
`GPIO_BRR_BR3`		3
`GPIO_BRR_BR4`		4
`GPIO_BRR_BR5`		5
`GPIO_BRR_BR6`		6
`GPIO_BRR_BR7`		7
`GPIO_BRR_BR8`		8
`GPIO_BRR_BR9`		9
`GPIO_BRR_BR10`		10
`GPIO_BRR_BR11`		11
`GPIO_BRR_BR12`		12
`GPIO_BRR_BR13`		13
`GPIO_BRR_BR14`		14
`GPIO_BRR_BR15`		15
`SECCFGR`	`0x30`	32	GPIO Security configuration register
`GPIO_SECCFGR_SEC0`		0
`GPIO_SECCFGR_SEC1`		1
`GPIO_SECCFGR_SEC2`		2
`GPIO_SECCFGR_SEC3`		3
`GPIO_SECCFGR_SEC4`		4
`GPIO_SECCFGR_SEC5`		5
`GPIO_SECCFGR_SEC6`		6
`GPIO_SECCFGR_SEC7`		7
`GPIO_SECCFGR_SEC8`		8
`GPIO_SECCFGR_SEC9`		9
`GPIO_SECCFGR_SEC10`		10
`GPIO_SECCFGR_SEC11`		11
`GPIO_SECCFGR_SEC12`		12
`GPIO_SECCFGR_SEC13`		13
`GPIO_SECCFGR_SEC14`		14
`GPIO_SECCFGR_SEC15`		15

SYSCFG — System configuration (section 8)

Register	Offset	Bits	Purpose
`SECCFGR`	`0x00`	32	SYSCFG secure configuration register
`SYSCFG_SECCFGR_SYSCFGSEC`		0	SYSCFG clock control security enable
`SYSCFG_SECCFGR_CLASSBSEC`		1	ClassB SYSCFG security enable
`SYSCFG_SECCFGR_SRAM2SEC`		2	SRAM2 SYSCFG security enable
`SYSCFG_SECCFGR_FPUSEC`		3	FPU SYSCFG security enable
`CFGR1`	`0x04`	32	SYSCFG configuration register 1
`SYSCFG_CFGR1_BOOSTEN`		8	I/O analog switch voltage booster enable
`SYSCFG_CFGR1_ANASWVDD`		9	GPIO analog switch control voltage selection enable
`SYSCFG_CFGR1_I2C_PB6_FMP`		16	I2C PB6 Fast mode plus
`SYSCFG_CFGR1_I2C_PB7_FMP`		17	I2C PB7 Fast mode plus
`SYSCFG_CFGR1_I2C_PB8_FMP`		18	I2C PB8 Fast mode plus
`SYSCFG_CFGR1_I2C_PB9_FMP`		19	I2C PB9 Fast mode plus
`SYSCFG_CFGR1_I2C1_FMP`		20	I2C1 Fast mode plus
`SYSCFG_CFGR1_I2C2_FMP`		21	I2C2 Fast mode plus
`SYSCFG_CFGR1_I2C3_FMP`		22	I2C3 Fast mode plus
`SYSCFG_CFGR1_I2C4_FMP`		23	I2C4 Fast mode plus
`FPUIMR`	`0x08`	32	SYSCFG FPU interrupt mask register
`SYSCFG_FPUIMR_FPU_IE`		0:5	All FPU interrupts enable
`SYSCFG_FPUIMR_FPU_IE_0`		0	Invalid operation Interrupt enable
`SYSCFG_FPUIMR_FPU_IE_1`		1	Divide-by-zero Interrupt enable
`SYSCFG_FPUIMR_FPU_IE_2`		2	Underflow Interrupt enable
`SYSCFG_FPUIMR_FPU_IE_3`		3	Overflow Interrupt enable
`SYSCFG_FPUIMR_FPU_IE_4`		4	Input denormal Interrupt enable
`SYSCFG_FPUIMR_FPU_IE_5`		5	Inexact Interrupt enable
`CNSLCKR`	`0x0C`	32	SYSCFG CPU non-secure lock register
`SYSCFG_CNSLCKR_LOCKNSVTOR`		0	Disable VTOR_NS register writes by SW or debug agent
`SYSCFG_CNSLCKR_LOCKNSMPU`		1	Disable Non-Secure MPU registers writes by SW or debug agent
`CSLCKR`	`0x10`	32	SYSCFG CPU secure lock register
`SYSCFG_CSLCKR_LOCKSVTAIRCR`		0	Disable changes to the secure vectror table address, handling of system faults
`SYSCFG_CSLCKR_LOCKSMPU`		1	Disable changes to the secure MPU registers writes by SW or debug agent
`SYSCFG_CSLCKR_LOCKSAU`		1	Disable changes to SAU registers
`CFGR2`	`0x14`	32	SYSCFG configuration register 2
`SYSCFG_CFGR2_CLL`		0	Core Lockup Lock
`SYSCFG_CFGR2_SPL`		1	SRAM Parity Lock
`SYSCFG_CFGR2_PVDL`		2	PVD Lock
`SYSCFG_CFGR2_ECCL`		3	ECC Lock
`SYSCFG_CFGR2_SPF`		8	SRAM Parity Flag
`SCSR`	`0x18`	32	SYSCFG SRAM2 control and status register
`SYSCFG_SCSR_SRAM2ER`		0	SRAM2 Erase Request
`SYSCFG_SCSR_SRAM2BSY`		1	SRAM2 Erase Ongoing
`SKR`	`0x1C`	32	SYSCFG SRAM2 key register
`SYSCFG_SKR_KEY`		0:7	SRAM2 write protection key for software erase
`SWPR`	`0x20`	32	SYSCFG SRAM2 write protection register 1
`SYSCFG_SWPR_P0WP`		0	SRAM2 Write protection page 0
`SYSCFG_SWPR_P1WP`		1	SRAM2 Write protection page 1
`SYSCFG_SWPR_P2WP`		2	SRAM2 Write protection page 2
`SYSCFG_SWPR_P3WP`		3	SRAM2 Write protection page 3
`SYSCFG_SWPR_P4WP`		4	SRAM2 Write protection page 4
`SYSCFG_SWPR_P5WP`		5	SRAM2 Write protection page 5
`SYSCFG_SWPR_P6WP`		6	SRAM2 Write protection page 6
`SYSCFG_SWPR_P7WP`		7	SRAM2 Write protection page 7
`SYSCFG_SWPR_P8WP`		8	SRAM2 Write protection page 8
`SYSCFG_SWPR_P9WP`		9	SRAM2 Write protection page 9
`SYSCFG_SWPR_P10WP`		10	SRAM2 Write protection page 10
`SYSCFG_SWPR_P11WP`		11	SRAM2 Write protection page 11
`SYSCFG_SWPR_P12WP`		12	SRAM2 Write protection page 12
`SYSCFG_SWPR_P13WP`		13	SRAM2 Write protection page 13
`SYSCFG_SWPR_P14WP`		14	SRAM2 Write protection page 14
`SYSCFG_SWPR_P15WP`		15	SRAM2 Write protection page 15
`SYSCFG_SWPR_P16WP`		16	SRAM2 Write protection page 16
`SYSCFG_SWPR_P17WP`		17	SRAM2 Write protection page 17
`SYSCFG_SWPR_P18WP`		18	SRAM2 Write protection page 18
`SYSCFG_SWPR_P19WP`		19	SRAM2 Write protection page 19
`SYSCFG_SWPR_P20WP`		20	SRAM2 Write protection page 20
`SYSCFG_SWPR_P21WP`		21	SRAM2 Write protection page 21
`SYSCFG_SWPR_P22WP`		22	SRAM2 Write protection page 22
`SYSCFG_SWPR_P23WP`		23	SRAM2 Write protection page 23
`SYSCFG_SWPR_P24WP`		24	SRAM2 Write protection page 24
`SYSCFG_SWPR_P25WP`		25	SRAM2 Write protection page 25
`SYSCFG_SWPR_P26WP`		26	SRAM2 Write protection page 26
`SYSCFG_SWPR_P27WP`		27	SRAM2 Write protection page 27
`SYSCFG_SWPR_P28WP`		28	SRAM2 Write protection page 28
`SYSCFG_SWPR_P29WP`		29	SRAM2 Write protection page 29
`SYSCFG_SWPR_P30WP`		30	SRAM2 Write protection page 30
`SYSCFG_SWPR_P31WP`		31	SRAM2 Write protection page 31
`SWPR2`	`0x24`	32	SYSCFG SRAM2 write protection register 2
`SYSCFG_SWPR2_P32WP`		0	SRAM2 Write protection page 32
`SYSCFG_SWPR2_P33WP`		1	SRAM2 Write protection page 33
`SYSCFG_SWPR2_P34WP`		2	SRAM2 Write protection page 34
`SYSCFG_SWPR2_P35WP`		3	SRAM2 Write protection page 35
`SYSCFG_SWPR2_P36WP`		4	SRAM2 Write protection page 36
`SYSCFG_SWPR2_P37WP`		5	SRAM2 Write protection page 37
`SYSCFG_SWPR2_P38WP`		6	SRAM2 Write protection page 38
`SYSCFG_SWPR2_P39WP`		7	SRAM2 Write protection page 39
`SYSCFG_SWPR2_P40WP`		8	SRAM2 Write protection page 40
`SYSCFG_SWPR2_P41WP`		9	SRAM2 Write protection page 41
`SYSCFG_SWPR2_P42WP`		10	SRAM2 Write protection page 42
`SYSCFG_SWPR2_P43WP`		11	SRAM2 Write protection page 43
`SYSCFG_SWPR2_P44WP`		12	SRAM2 Write protection page 44
`SYSCFG_SWPR2_P45WP`		13	SRAM2 Write protection page 45
`SYSCFG_SWPR2_P46WP`		14	SRAM2 Write protection page 46
`SYSCFG_SWPR2_P47WP`		15	SRAM2 Write protection page 47
`SYSCFG_SWPR2_P48WP`		16	SRAM2 Write protection page 48
`SYSCFG_SWPR2_P49WP`		17	SRAM2 Write protection page 49
`SYSCFG_SWPR2_P50WP`		18	SRAM2 Write protection page 50
`SYSCFG_SWPR2_P51WP`		19	SRAM2 Write protection page 51
`SYSCFG_SWPR2_P52WP`		20	SRAM2 Write protection page 52
`SYSCFG_SWPR2_P53WP`		21	SRAM2 Write protection page 53
`SYSCFG_SWPR2_P54WP`		22	SRAM2 Write protection page 54
`SYSCFG_SWPR2_P55WP`		23	SRAM2 Write protection page 55
`SYSCFG_SWPR2_P56WP`		24	SRAM2 Write protection page 56
`SYSCFG_SWPR2_P57WP`		25	SRAM2 Write protection page 57
`SYSCFG_SWPR2_P58WP`		26	SRAM2 Write protection page 58
`SYSCFG_SWPR2_P59WP`		27	SRAM2 Write protection page 59
`SYSCFG_SWPR2_P60WP`		28	SRAM2 Write protection page 60
`SYSCFG_SWPR2_P61WP`		29	SRAM2 Write protection page 61
`SYSCFG_SWPR2_P62WP`		30	SRAM2 Write protection page 62
`SYSCFG_SWPR2_P63WP`		31	SRAM2 Write protection page 63
`RSSCMDR`	`0x2C`	32	SYSCFG RSS command register
`SYSCFG_RSSCMDR_RSSCMD`		0:15	RSS commands

EXTI — External interrupts (section 7)

Register	Offset	Bits	Purpose
`RTSR1`	`0x00`	32	EXTI Rising Trigger Selection Register 1
`EXTI_RTSR1_RT0`		0	Rising trigger configuration for input line 0
`EXTI_RTSR1_RT1`		1	Rising trigger configuration for input line 1
`EXTI_RTSR1_RT2`		2	Rising trigger configuration for input line 2
`EXTI_RTSR1_RT3`		3	Rising trigger configuration for input line 3
`EXTI_RTSR1_RT4`		4	Rising trigger configuration for input line 4
`EXTI_RTSR1_RT5`		5	Rising trigger configuration for input line 5
`EXTI_RTSR1_RT6`		6	Rising trigger configuration for input line 6
`EXTI_RTSR1_RT7`		7	Rising trigger configuration for input line 7
`EXTI_RTSR1_RT8`		8	Rising trigger configuration for input line 8
`EXTI_RTSR1_RT9`		9	Rising trigger configuration for input line 9
`EXTI_RTSR1_RT10`		10	Rising trigger configuration for input line 10
`EXTI_RTSR1_RT11`		11	Rising trigger configuration for input line 11
`EXTI_RTSR1_RT12`		12	Rising trigger configuration for input line 12
`EXTI_RTSR1_RT13`		13	Rising trigger configuration for input line 13
`EXTI_RTSR1_RT14`		14	Rising trigger configuration for input line 14
`EXTI_RTSR1_RT15`		15	Rising trigger configuration for input line 15
`EXTI_RTSR1_RT16`		16	Rising trigger configuration for input line 16
`EXTI_RTSR1_RT21`		21	Rising trigger configuration for input line 21
`EXTI_RTSR1_RT22`		22	Rising trigger configuration for input line 22
`EXTI_RTSR1_RT23`		23	Rising trigger configuration for input line 23
`EXTI_RTSR1_RT24`		24	Rising trigger configuration for input line 24
`EXTI_RTSR1_RT25`		25	Rising trigger configuration for input line 25
`EXTI_RTSR1_RT26`		26	Rising trigger configuration for input line 26
`EXTI_RTSR1_RT27`		27	Rising trigger configuration for input line 27
`EXTI_RTSR1_RT28`		28	Rising trigger configuration for input line 28
`EXTI_RTSR1_RT29`		29	Rising trigger configuration for input line 29
`EXTI_RTSR1_RT30`		30	Rising trigger configuration for input line 30
`EXTI_RTSR1_RT31`		31	Rising trigger configuration for input line 31
`FTSR1`	`0x04`	32	EXTI Falling Trigger Selection Register 1
`EXTI_FTSR1_FT0`		0	Falling trigger configuration for input line 0
`EXTI_FTSR1_FT1`		1	Falling trigger configuration for input line 1
`EXTI_FTSR1_FT2`		2	Falling trigger configuration for input line 2
`EXTI_FTSR1_FT3`		3	Falling trigger configuration for input line 3
`EXTI_FTSR1_FT4`		4	Falling trigger configuration for input line 4
`EXTI_FTSR1_FT5`		5	Falling trigger configuration for input line 5
`EXTI_FTSR1_FT6`		6	Falling trigger configuration for input line 6
`EXTI_FTSR1_FT7`		7	Falling trigger configuration for input line 7
`EXTI_FTSR1_FT8`		8	Falling trigger configuration for input line 8
`EXTI_FTSR1_FT9`		9	Falling trigger configuration for input line 9
`EXTI_FTSR1_FT10`		10	Falling trigger configuration for input line 10
`EXTI_FTSR1_FT11`		11	Falling trigger configuration for input line 11
`EXTI_FTSR1_FT12`		12	Falling trigger configuration for input line 12
`EXTI_FTSR1_FT13`		13	Falling trigger configuration for input line 13
`EXTI_FTSR1_FT14`		14	Falling trigger configuration for input line 14
`EXTI_FTSR1_FT15`		15	Falling trigger configuration for input line 15
`EXTI_FTSR1_FT16`		16	Falling trigger configuration for input line 16
`EXTI_FTSR1_FT21`		21	Falling trigger configuration for input line 21
`EXTI_FTSR1_FT22`		22	Falling trigger configuration for input line 22
`EXTI_FTSR1_FT23`		23	Falling trigger configuration for input line 23
`EXTI_FTSR1_FT24`		24	Falling trigger configuration for input line 24
`EXTI_FTSR1_FT25`		25	Falling trigger configuration for input line 25
`EXTI_FTSR1_FT26`		26	Falling trigger configuration for input line 26
`EXTI_FTSR1_FT27`		27	Falling trigger configuration for input line 27
`EXTI_FTSR1_FT28`		28	Falling trigger configuration for input line 28
`EXTI_FTSR1_FT29`		29	Falling trigger configuration for input line 29
`EXTI_FTSR1_FT30`		30	Falling trigger configuration for input line 30
`EXTI_FTSR1_FT31`		31	Falling trigger configuration for input line 31
`SWIER1`	`0x08`	32	EXTI Software Interrupt event Register 1
`EXTI_SWIER1_SWI0`		0	Software Interrupt on line 0
`EXTI_SWIER1_SWI1`		1	Software Interrupt on line 1
`EXTI_SWIER1_SWI2`		2	Software Interrupt on line 2
`EXTI_SWIER1_SWI3`		3	Software Interrupt on line 3
`EXTI_SWIER1_SWI4`		4	Software Interrupt on line 4
`EXTI_SWIER1_SWI5`		5	Software Interrupt on line 5
`EXTI_SWIER1_SWI6`		6	Software Interrupt on line 6
`EXTI_SWIER1_SWI7`		7	Software Interrupt on line 7
`EXTI_SWIER1_SWI8`		8	Software Interrupt on line 8
`EXTI_SWIER1_SWI9`		9	Software Interrupt on line 9
`EXTI_SWIER1_SWI10`		10	Software Interrupt on line 10
`EXTI_SWIER1_SWI11`		11	Software Interrupt on line 11
`EXTI_SWIER1_SWI12`		12	Software Interrupt on line 12
`EXTI_SWIER1_SWI13`		13	Software Interrupt on line 13
`EXTI_SWIER1_SWI14`		14	Software Interrupt on line 14
`EXTI_SWIER1_SWI15`		15	Software Interrupt on line 15
`EXTI_SWIER1_SWI16`		16	Software Interrupt on line 16
`EXTI_SWIER1_SWI21`		21	Software Interrupt on line 21
`EXTI_SWIER1_SWI22`		22	Software Interrupt on line 22
`EXTI_SWIER1_SWI23`		23	Software Interrupt on line 23
`EXTI_SWIER1_SWI24`		24	Software Interrupt on line 24
`EXTI_SWIER1_SWI25`		25	Software Interrupt on line 25
`EXTI_SWIER1_SWI26`		26	Software Interrupt on line 26
`EXTI_SWIER1_SWI27`		27	Software Interrupt on line 27
`EXTI_SWIER1_SWI28`		28	Software Interrupt on line 28
`EXTI_SWIER1_SWI29`		29	Software Interrupt on line 29
`EXTI_SWIER1_SWI30`		30	Software Interrupt on line 30
`EXTI_SWIER1_SWI31`		31	Software Interrupt on line 31
`RPR1`	`0x0C`	32	EXTI Rising Pending Register 1
`EXTI_RPR1_RPIF0`		0	Rising Pending Interrupt Flag on line 0
`EXTI_RPR1_RPIF1`		1	Rising Pending Interrupt Flag on line 1
`EXTI_RPR1_RPIF2`		2	Rising Pending Interrupt Flag on line 2
`EXTI_RPR1_RPIF3`		3	Rising Pending Interrupt Flag on line 3
`EXTI_RPR1_RPIF4`		4	Rising Pending Interrupt Flag on line 4
`EXTI_RPR1_RPIF5`		5	Rising Pending Interrupt Flag on line 5
`EXTI_RPR1_RPIF6`		6	Rising Pending Interrupt Flag on line 6
`EXTI_RPR1_RPIF7`		7	Rising Pending Interrupt Flag on line 7
`EXTI_RPR1_RPIF8`		8	Rising Pending Interrupt Flag on line 8
`EXTI_RPR1_RPIF9`		9	Rising Pending Interrupt Flag on line 9
`EXTI_RPR1_RPIF10`		10	Rising Pending Interrupt Flag on line 10
`EXTI_RPR1_RPIF11`		11	Rising Pending Interrupt Flag on line 11
`EXTI_RPR1_RPIF12`		12	Rising Pending Interrupt Flag on line 12
`EXTI_RPR1_RPIF13`		13	Rising Pending Interrupt Flag on line 13
`EXTI_RPR1_RPIF14`		14	Rising Pending Interrupt Flag on line 14
`EXTI_RPR1_RPIF15`		15	Rising Pending Interrupt Flag on line 15
`EXTI_RPR1_RPIF16`		16	Rising Pending Interrupt Flag on line 16
`EXTI_RPR1_RPIF21`		21	Rising Pending Interrupt Flag on line 21
`EXTI_RPR1_RPIF22`		22	Rising Pending Interrupt Flag on line 22
`EXTI_RPR1_RPIF23`		23	Rising Pending Interrupt Flag on line 23
`EXTI_RPR1_RPIF24`		24	Rising Pending Interrupt Flag on line 24
`EXTI_RPR1_RPIF25`		25	Rising Pending Interrupt Flag on line 25
`EXTI_RPR1_RPIF26`		26	Rising Pending Interrupt Flag on line 26
`EXTI_RPR1_RPIF27`		27	Rising Pending Interrupt Flag on line 27
`EXTI_RPR1_RPIF28`		28	Rising Pending Interrupt Flag on line 28
`EXTI_RPR1_RPIF29`		29	Rising Pending Interrupt Flag on line 29
`EXTI_RPR1_RPIF30`		30	Rising Pending Interrupt Flag on line 30
`EXTI_RPR1_RPIF31`		31	Rising Pending Interrupt Flag on line 31
`FPR1`	`0x10`	32	EXTI Falling Pending Register 1
`EXTI_FPR1_FPIF0`		0	Falling Pending Interrupt Flag on line 0
`EXTI_FPR1_FPIF1`		1	Falling Pending Interrupt Flag on line 1
`EXTI_FPR1_FPIF2`		2	Falling Pending Interrupt Flag on line 2
`EXTI_FPR1_FPIF3`		3	Falling Pending Interrupt Flag on line 3
`EXTI_FPR1_FPIF4`		4	Falling Pending Interrupt Flag on line 4
`EXTI_FPR1_FPIF5`		5	Falling Pending Interrupt Flag on line 5
`EXTI_FPR1_FPIF6`		6	Falling Pending Interrupt Flag on line 6
`EXTI_FPR1_FPIF7`		7	Falling Pending Interrupt Flag on line 7
`EXTI_FPR1_FPIF8`		8	Falling Pending Interrupt Flag on line 8
`EXTI_FPR1_FPIF9`		9	Falling Pending Interrupt Flag on line 9
`EXTI_FPR1_FPIF10`		10	Falling Pending Interrupt Flag on line 10
`EXTI_FPR1_FPIF11`		11	Falling Pending Interrupt Flag on line 11
`EXTI_FPR1_FPIF12`		12	Falling Pending Interrupt Flag on line 12
`EXTI_FPR1_FPIF13`		13	Falling Pending Interrupt Flag on line 13
`EXTI_FPR1_FPIF14`		14	Falling Pending Interrupt Flag on line 14
`EXTI_FPR1_FPIF15`		15	Falling Pending Interrupt Flag on line 15
`EXTI_FPR1_FPIF16`		16	Falling Pending Interrupt Flag on line 16
`EXTI_FPR1_FPIF21`		21	Falling Pending Interrupt Flag on line 21
`EXTI_FPR1_FPIF22`		22	Falling Pending Interrupt Flag on line 22
`EXTI_FPR1_FPIF23`		23	Falling Pending Interrupt Flag on line 23
`EXTI_FPR1_FPIF24`		24	Falling Pending Interrupt Flag on line 24
`EXTI_FPR1_FPIF25`		25	Falling Pending Interrupt Flag on line 25
`EXTI_FPR1_FPIF26`		26	Falling Pending Interrupt Flag on line 26
`EXTI_FPR1_FPIF27`		27	Falling Pending Interrupt Flag on line 27
`EXTI_FPR1_FPIF28`		28	Falling Pending Interrupt Flag on line 28
`EXTI_FPR1_FPIF29`		29	Falling Pending Interrupt Flag on line 29
`EXTI_FPR1_FPIF30`		30	Falling Pending Interrupt Flag on line 30
`EXTI_FPR1_FPIF31`		31	Falling Pending Interrupt Flag on line 31
`SECCFGR1`	`0x14`	32	EXTI Security Configuration Register 1
`EXTI_SECCFGR1_SEC0`		0	Security enable on Event input 0
`EXTI_SECCFGR1_SEC1`		1	Security enable on Event input 1
`EXTI_SECCFGR1_SEC2`		2	Security enable on Event input 2
`EXTI_SECCFGR1_SEC3`		3	Security enable on Event input 3
`EXTI_SECCFGR1_SEC4`		4	Security enable on Event input 4
`EXTI_SECCFGR1_SEC5`		5	Security enable on Event input 5
`EXTI_SECCFGR1_SEC6`		6	Security enable on Event input 6
`EXTI_SECCFGR1_SEC7`		7	Security enable on Event input 7
`EXTI_SECCFGR1_SEC8`		8	Security enable on Event input 8
`EXTI_SECCFGR1_SEC9`		9	Security enable on Event input 9
`EXTI_SECCFGR1_SEC10`		10	Security enable on Event input 10
`EXTI_SECCFGR1_SEC11`		11	Security enable on Event input 11
`EXTI_SECCFGR1_SEC12`		12	Security enable on Event input 12
`EXTI_SECCFGR1_SEC13`		13	Security enable on Event input 13
`EXTI_SECCFGR1_SEC14`		14	Security enable on Event input 14
`EXTI_SECCFGR1_SEC15`		15	Security enable on Event input 15
`EXTI_SECCFGR1_SEC16`		16	Security enable on Event input 16
`EXTI_SECCFGR1_SEC17`		17	Security enable on Event input 17
`EXTI_SECCFGR1_SEC18`		18	Security enable on Event input 18
`EXTI_SECCFGR1_SEC19`		19	Security enable on Event input 19
`EXTI_SECCFGR1_SEC20`		20	Security enable on Event input 20
`EXTI_SECCFGR1_SEC21`		21	Security enable on Event input 21
`EXTI_SECCFGR1_SEC22`		22	Security enable on Event input 22
`EXTI_SECCFGR1_SEC23`		23	Security enable on Event input 23
`EXTI_SECCFGR1_SEC24`		24	Security enable on Event input 24
`EXTI_SECCFGR1_SEC25`		25	Security enable on Event input 25
`EXTI_SECCFGR1_SEC26`		26	Security enable on Event input 26
`EXTI_SECCFGR1_SEC27`		27	Security enable on Event input 27
`EXTI_SECCFGR1_SEC28`		28	Security enable on Event input 28
`EXTI_SECCFGR1_SEC29`		29	Security enable on Event input 29
`EXTI_SECCFGR1_SEC30`		30	Security enable on Event input 30
`EXTI_SECCFGR1_SEC31`		31	Security enable on Event input 31
`PRIVCFGR1`	`0x18`	32	EXTI Privilege Configuration Register 1
`EXTI_PRIVCFGR1_PRIV0`		0	Privilege enable on Event input 0
`EXTI_PRIVCFGR1_PRIV1`		1	Privilege enable on Event input 1
`EXTI_PRIVCFGR1_PRIV2`		2	Privilege enable on Event input 2
`EXTI_PRIVCFGR1_PRIV3`		3	Privilege enable on Event input 3
`EXTI_PRIVCFGR1_PRIV4`		4	Privilege enable on Event input 4
`EXTI_PRIVCFGR1_PRIV5`		5	Privilege enable on Event input 5
`EXTI_PRIVCFGR1_PRIV6`		6	Privilege enable on Event input 6
`EXTI_PRIVCFGR1_PRIV7`		7	Privilege enable on Event input 7
`EXTI_PRIVCFGR1_PRIV8`		8	Privilege enable on Event input 8
`EXTI_PRIVCFGR1_PRIV9`		9	Privilege enable on Event input 9
`EXTI_PRIVCFGR1_PRIV10`		10	Privilege enable on Event input 10
`EXTI_PRIVCFGR1_PRIV11`		11	Privilege enable on Event input 11
`EXTI_PRIVCFGR1_PRIV12`		12	Privilege enable on Event input 12
`EXTI_PRIVCFGR1_PRIV13`		13	Privilege enable on Event input 13
`EXTI_PRIVCFGR1_PRIV14`		14	Privilege enable on Event input 14
`EXTI_PRIVCFGR1_PRIV15`		15	Privilege enable on Event input 15
`EXTI_PRIVCFGR1_PRIV16`		16	Privilege enable on Event input 16
`EXTI_PRIVCFGR1_PRIV17`		17	Privilege enable on Event input 17
`EXTI_PRIVCFGR1_PRIV18`		18	Privilege enable on Event input 18
`EXTI_PRIVCFGR1_PRIV19`		19	Privilege enable on Event input 19
`EXTI_PRIVCFGR1_PRIV20`		20	Privilege enable on Event input 20
`EXTI_PRIVCFGR1_PRIV21`		21	Privilege enable on Event input 21
`EXTI_PRIVCFGR1_PRIV22`		22	Privilege enable on Event input 22
`EXTI_PRIVCFGR1_PRIV23`		23	Privilege enable on Event input 23
`EXTI_PRIVCFGR1_PRIV24`		24	Privilege enable on Event input 24
`EXTI_PRIVCFGR1_PRIV25`		25	Privilege enable on Event input 25
`EXTI_PRIVCFGR1_PRIV26`		26	Privilege enable on Event input 26
`EXTI_PRIVCFGR1_PRIV27`		27	Privilege enable on Event input 27
`EXTI_PRIVCFGR1_PRIV28`		28	Privilege enable on Event input 28
`EXTI_PRIVCFGR1_PRIV29`		29	Privilege enable on Event input 29
`EXTI_PRIVCFGR1_PRIV30`		30	Privilege enable on Event input 30
`EXTI_PRIVCFGR1_PRIV31`		31	Privilege enable on Event input 31
`RTSR2`	`0x20`	32	EXTI Rising Trigger Selection Register 2
`EXTI_RTSR2_RT32`		0	Rising trigger configuration for input line 32
`EXTI_RTSR2_RT33`		1	Rising trigger configuration for input line 33
`EXTI_RTSR2_RT34`		2	Rising trigger configuration for input line 34
`EXTI_RTSR2_RT35`		3	Rising trigger configuration for input line 35
`EXTI_RTSR2_RT36`		4	Rising trigger configuration for input line 36
`EXTI_RTSR2_RT37`		5	Rising trigger configuration for input line 37
`EXTI_RTSR2_RT38`		6	Rising trigger configuration for input line 38
`EXTI_RTSR2_RT39`		7	Rising trigger configuration for input line 39
`EXTI_RTSR2_RT40`		8	Rising trigger configuration for input line 40
`EXTI_RTSR2_RT41`		9	Rising trigger configuration for input line 41
`EXTI_RTSR2_RT42`		10	Rising trigger configuration for input line 42
`FTSR2`	`0x24`	32	EXTI Falling Trigger Selection Register 2
`EXTI_FTSR2_FT32`		0	Falling trigger configuration for input line 32
`EXTI_FTSR2_FT33`		1	Falling trigger configuration for input line 33
`EXTI_FTSR2_FT34`		2	Falling trigger configuration for input line 34
`EXTI_FTSR2_FT35`		3	Falling trigger configuration for input line 35
`EXTI_FTSR2_FT36`		4	Falling trigger configuration for input line 36
`EXTI_FTSR2_FT37`		5	Falling trigger configuration for input line 37
`EXTI_FTSR2_FT38`		6	Falling trigger configuration for input line 38
`EXTI_FTSR2_FT39`		7	Falling trigger configuration for input line 39
`EXTI_FTSR2_FT40`		8	Falling trigger configuration for input line 40
`EXTI_FTSR2_FT41`		9	Falling trigger configuration for input line 41
`EXTI_FTSR2_FT42`		10	Falling trigger configuration for input line 42
`SWIER2`	`0x28`	32	EXTI Software Interrupt event Register 2
`EXTI_SWIER2_SWI32`		0	Software Interrupt on line 32
`EXTI_SWIER2_SWI33`		1	Software Interrupt on line 33
`EXTI_SWIER2_SWI34`		2	Software Interrupt on line 34
`EXTI_SWIER2_SWI35`		3	Software Interrupt on line 35
`EXTI_SWIER2_SWI36`		4	Software Interrupt on line 36
`EXTI_SWIER2_SWI37`		5	Software Interrupt on line 37
`EXTI_SWIER2_SWI38`		6	Software Interrupt on line 38
`EXTI_SWIER2_SWI39`		7	Software Interrupt on line 39
`EXTI_SWIER2_SWI40`		8	Software Interrupt on line 40
`EXTI_SWIER2_SWI41`		9	Software Interrupt on line 41
`EXTI_SWIER2_SWI42`		10	Software Interrupt on line 42
`RPR2`	`0x2C`	32	EXTI Rising Pending Register 2
`EXTI_RPR2_RPIF32`		0	Rising Pending Interrupt Flag on line 32
`EXTI_RPR2_RPIF33`		1	Rising Pending Interrupt Flag on line 33
`EXTI_RPR2_RPIF34`		2	Rising Pending Interrupt Flag on line 34
`EXTI_RPR2_RPIF35`		3	Rising Pending Interrupt Flag on line 35
`EXTI_RPR2_RPIF36`		4	Rising Pending Interrupt Flag on line 36
`EXTI_RPR2_RPIF37`		5	Rising Pending Interrupt Flag on line 37
`EXTI_RPR2_RPIF38`		6	Rising Pending Interrupt Flag on line 38
`EXTI_RPR2_RPIF39`		7	Rising Pending Interrupt Flag on line 39
`EXTI_RPR2_RPIF40`		8	Rising Pending Interrupt Flag on line 40
`EXTI_RPR2_RPIF41`		9	Rising Pending Interrupt Flag on line 41
`EXTI_RPR2_RPIF42`		10	Rising Pending Interrupt Flag on line 42
`FPR2`	`0x30`	32	EXTI Falling Pending Register 2
`EXTI_FPR2_FPIF32`		0	Falling Pending Interrupt Flag on line 32
`EXTI_FPR2_FPIF33`		1	Falling Pending Interrupt Flag on line 33
`EXTI_FPR2_FPIF34`		2	Falling Pending Interrupt Flag on line 34
`EXTI_FPR2_FPIF35`		3	Falling Pending Interrupt Flag on line 35
`EXTI_FPR2_FPIF36`		4	Falling Pending Interrupt Flag on line 36
`EXTI_FPR2_FPIF37`		5	Falling Pending Interrupt Flag on line 37
`EXTI_FPR2_FPIF38`		6	Falling Pending Interrupt Flag on line 38
`EXTI_FPR2_FPIF39`		7	Falling Pending Interrupt Flag on line 39
`EXTI_FPR2_FPIF40`		8	Falling Pending Interrupt Flag on line 40
`EXTI_FPR2_FPIF41`		9	Falling Pending Interrupt Flag on line 41
`EXTI_FPR2_FPIF42`		10	Falling Pending Interrupt Flag on line 42
`SECCFGR2`	`0x34`	32	EXTI Security Configuration Register 2
`EXTI_SECCFGR2_SEC32`		0	Security enable on Event input 32
`EXTI_SECCFGR2_SEC33`		1	Security enable on Event input 33
`EXTI_SECCFGR2_SEC34`		2	Security enable on Event input 34
`EXTI_SECCFGR2_SEC35`		3	Security enable on Event input 35
`EXTI_SECCFGR2_SEC36`		4	Security enable on Event input 36
`EXTI_SECCFGR2_SEC37`		5	Security enable on Event input 37
`EXTI_SECCFGR2_SEC38`		6	Security enable on Event input 38
`EXTI_SECCFGR2_SEC39`		7	Security enable on Event input 39
`EXTI_SECCFGR2_SEC40`		8	Security enable on Event input 40
`EXTI_SECCFGR2_SEC41`		9	Security enable on Event input 41
`EXTI_SECCFGR2_SEC42`		10	Security enable on Event input 42
`PRIVCFGR2`	`0x38`	32	EXTI Privilege Configuration Register 2
`EXTI_PRIVCFGR2_PRIV32`		0	Privilege enable on Event input 32
`EXTI_PRIVCFGR2_PRIV33`		1	Privilege enable on Event input 33
`EXTI_PRIVCFGR2_PRIV34`		2	Privilege enable on Event input 34
`EXTI_PRIVCFGR2_PRIV35`		3	Privilege enable on Event input 35
`EXTI_PRIVCFGR2_PRIV36`		4	Privilege enable on Event input 36
`EXTI_PRIVCFGR2_PRIV37`		5	Privilege enable on Event input 37
`EXTI_PRIVCFGR2_PRIV38`		6	Privilege enable on Event input 38
`EXTI_PRIVCFGR2_PRIV39`		7	Privilege enable on Event input 39
`EXTI_PRIVCFGR2_PRIV40`		8	Privilege enable on Event input 40
`EXTI_PRIVCFGR2_PRIV41`		9	Privilege enable on Event input 41
`EXTI_PRIVCFGR2_PRIV42`		10	Privilege enable on Event input 42
`EXTICR`+4×4	`0x60`	32	EXTI External Interrupt Configuration Register, 0x60 -- 0x6C
`LOCKR`	`0x70`	32	EXTI Lock Register
`EXTI_LOCKR_LOCK`		0	Global security and privilege configuration lock
`IMR1`	`0x80`	32	EXTI Interrupt Mask Register 1
`EXTI_IMR1_IM0`		0	Interrupt Mask on line 0
`EXTI_IMR1_IM`		0:31	Interrupt Mask All
`EXTI_IMR1_IM1`		1	Interrupt Mask on line 1
`EXTI_IMR1_IM2`		2	Interrupt Mask on line 2
`EXTI_IMR1_IM3`		3	Interrupt Mask on line 3
`EXTI_IMR1_IM4`		4	Interrupt Mask on line 4
`EXTI_IMR1_IM5`		5	Interrupt Mask on line 5
`EXTI_IMR1_IM6`		6	Interrupt Mask on line 6
`EXTI_IMR1_IM7`		7	Interrupt Mask on line 7
`EXTI_IMR1_IM8`		8	Interrupt Mask on line 8
`EXTI_IMR1_IM9`		9	Interrupt Mask on line 9
`EXTI_IMR1_IM10`		10	Interrupt Mask on line 10
`EXTI_IMR1_IM11`		11	Interrupt Mask on line 11
`EXTI_IMR1_IM12`		12	Interrupt Mask on line 12
`EXTI_IMR1_IM13`		13	Interrupt Mask on line 13
`EXTI_IMR1_IM14`		14	Interrupt Mask on line 14
`EXTI_IMR1_IM15`		15	Interrupt Mask on line 15
`EXTI_IMR1_IM16`		16	Interrupt Mask on line 16
`EXTI_IMR1_IM17`		17	Interrupt Mask on line 17
`EXTI_IMR1_IM18`		18	Interrupt Mask on line 18
`EXTI_IMR1_IM19`		19	Interrupt Mask on line 19
`EXTI_IMR1_IM20`		20	Interrupt Mask on line 20
`EXTI_IMR1_IM21`		21	Interrupt Mask on line 21
`EXTI_IMR1_IM22`		22	Interrupt Mask on line 22
`EXTI_IMR1_IM23`		23	Interrupt Mask on line 23
`EXTI_IMR1_IM24`		24	Interrupt Mask on line 24
`EXTI_IMR1_IM25`		25	Interrupt Mask on line 25
`EXTI_IMR1_IM26`		26	Interrupt Mask on line 26
`EXTI_IMR1_IM27`		27	Interrupt Mask on line 27
`EXTI_IMR1_IM28`		28	Interrupt Mask on line 28
`EXTI_IMR1_IM29`		29	Interrupt Mask on line 29
`EXTI_IMR1_IM30`		30	Interrupt Mask on line 30
`EXTI_IMR1_IM31`		31	Interrupt Mask on line 31
`EMR1`	`0x84`	32	EXTI Event Mask Register 1
`EXTI_EMR1_EM0`		0	Event Mask on line 0
`EXTI_EMR1_EM`		0:31	Event Mask All
`EXTI_EMR1_EM1`		1	Event Mask on line 1
`EXTI_EMR1_EM2`		2	Event Mask on line 2
`EXTI_EMR1_EM3`		3	Event Mask on line 3
`EXTI_EMR1_EM4`		4	Event Mask on line 4
`EXTI_EMR1_EM5`		5	Event Mask on line 5
`EXTI_EMR1_EM6`		6	Event Mask on line 6
`EXTI_EMR1_EM7`		7	Event Mask on line 7
`EXTI_EMR1_EM8`		8	Event Mask on line 8
`EXTI_EMR1_EM9`		9	Event Mask on line 9
`EXTI_EMR1_EM10`		10	Event Mask on line 10
`EXTI_EMR1_EM11`		11	Event Mask on line 11
`EXTI_EMR1_EM12`		12	Event Mask on line 12
`EXTI_EMR1_EM13`		13	Event Mask on line 13
`EXTI_EMR1_EM14`		14	Event Mask on line 14
`EXTI_EMR1_EM15`		15	Event Mask on line 15
`EXTI_EMR1_EM16`		16	Event Mask on line 16
`EXTI_EMR1_EM17`		17	Event Mask on line 17
`EXTI_EMR1_EM18`		18	Event Mask on line 18
`EXTI_EMR1_EM19`		19	Event Mask on line 19
`EXTI_EMR1_EM20`		20	Event Mask on line 20
`EXTI_EMR1_EM21`		21	Event Mask on line 21
`EXTI_EMR1_EM22`		22	Event Mask on line 22
`EXTI_EMR1_EM23`		23	Event Mask on line 23
`EXTI_EMR1_EM24`		24	Event Mask on line 24
`EXTI_EMR1_EM25`		25	Event Mask on line 25
`EXTI_EMR1_EM26`		26	Event Mask on line 26
`EXTI_EMR1_EM27`		27	Event Mask on line 27
`EXTI_EMR1_EM28`		28	Event Mask on line 28
`EXTI_EMR1_EM29`		29	Event Mask on line 29
`EXTI_EMR1_EM30`		30	Event Mask on line 30
`EXTI_EMR1_EM31`		31	Event Mask on line 31
`IMR2`	`0x90`	32	EXTI Interrupt Mask Register 2
`EXTI_IMR2_IM32`		0	Interrupt Mask on line 32
`EXTI_IMR2_IM`		0:10	Interrupt Mask All
`EXTI_IMR2_IM33`		1	Interrupt Mask on line 33
`EXTI_IMR2_IM34`		2	Interrupt Mask on line 34
`EXTI_IMR2_IM35`		3	Interrupt Mask on line 35
`EXTI_IMR2_IM36`		4	Interrupt Mask on line 36
`EXTI_IMR2_IM37`		5	Interrupt Mask on line 37
`EXTI_IMR2_IM38`		6	Interrupt Mask on line 38
`EXTI_IMR2_IM40`		8	Interrupt Mask on line 40
`EXTI_IMR2_IM41`		9	Interrupt Mask on line 41
`EXTI_IMR2_IM42`		10	Interrupt Mask on line 42
`EMR2`	`0x94`	32	EXTI Event Mask Register 2
`EXTI_EMR2_EM32`		0	Event Mask on line 32
`EXTI_EMR2_EM`		0:10	Event Mask All
`EXTI_EMR2_EM33`		1	Event Mask on line 33
`EXTI_EMR2_EM34`		2	Event Mask on line 34
`EXTI_EMR2_EM35`		3	Event Mask on line 35
`EXTI_EMR2_EM36`		4	Event Mask on line 36
`EXTI_EMR2_EM37`		5	Event Mask on line 37
`EXTI_EMR2_EM38`		6	Event Mask on line 38
`EXTI_EMR2_EM40`		8	Event Mask on line 40
`EXTI_EMR2_EM41`		9	Event Mask on line 41
`EXTI_EMR2_EM42`		10	Event Mask on line 42

DMA — DMA channel (section 9)

Register	Offset	Bits	Purpose
`CCR`	`0x00`	32	DMA channel x configuration register
`DMA_CCR_EN`		0	Channel enable
`DMA_CCR_TCIE`		1	Transfer complete interrupt enable
`DMA_CCR_HTIE`		2	Half Transfer interrupt enable
`DMA_CCR_TEIE`		3	Transfer error interrupt enable
`DMA_CCR_DIR`		4	Data transfer direction
`DMA_CCR_CIRC`		5	Circular mode
`DMA_CCR_PINC`		6	Peripheral increment mode
`DMA_CCR_MINC`		7	Memory increment mode
`DMA_CCR_PSIZE`		8:9	PSIZE[1:0] bits (Peripheral size)
`DMA_CCR_MSIZE`		10:11	MSIZE[1:0] bits (Memory size)
`DMA_CCR_PL`		12:13	PL[1:0] bits(Channel Priority level)
`DMA_CCR_MEM2MEM`		14	Memory to memory mode
`DMA_CCR_DBM`		15	Double-buffer mode
`DMA_CCR_CT`		16	Current target of DMA transfer in double-buffer mode
`DMA_CCR_SECM`		17	Secure mode
`DMA_CCR_SSEC`		18	Security of the DMA transfer from the source
`DMA_CCR_DSEC`		19	Security of the DMA transfer to the destination
`DMA_CCR_PRIV`		20	Privileged mode
`CNDTR`	`0x04`	32	DMA channel x number of data register
`DMA_CNDTR_NDT`		0:15	Number of data to Transfer
`CPAR`	`0x08`	32	DMA channel x peripheral address register
`DMA_CPAR_PA`		0:31	Peripheral Address
`CM0AR`	`0x0C`	32	DMA channel x memory 0 address register
`DMA_CM0AR_MA`		0:31	Memory 0 Address
`CM1AR`	`0x10`	32	DMA channel x memory 1 address register
`DMA_CM1AR_MA`		0:31	Memory 1 Address

PWR — Power and sleep modes (section 10)

Register	Offset	Bits	Purpose
`CR1`	`0x00`	32	PWR power control register 1
`PWR_CR1_LPMS`		0:2	Low-power mode selection field
`PWR_CR1_DBP`		8	Disable Back-up domain Protection
`PWR_CR1_VOS`		14:15	VOS[1:0] bits (Regulator voltage scaling output selection)
`PWR_CR1_LPR`		14	Regulator low-power mode
`CR2`	`0x04`	32	PWR power control register 2
`PWR_CR2_PVDE`		0	Power Voltage Detector Enable
`PWR_CR2_PLS`		1:3	PVD level selection
`PWR_CR2_PVME`		4:7	PVM bits field
`PWR_CR2_PVME1`		4	PVM 1 Enable
`PWR_CR2_PVME2`		5	PVM 2 Enable
`PWR_CR2_PVME3`		6	PVM 3 Enable
`PWR_CR2_PVME4`		7	PVM 4 Enable
`PWR_CR2_IOSV`		9	VDD IO2 independent I/Os Supply Valid
`PWR_CR2_USV`		10	VDD USB Supply Valid
`CR3`	`0x08`	32	PWR power control register 3
`PWR_CR3_EWUP`		0:4	Enable Wake-Up Pins
`PWR_CR3_EWUP1`		0	Enable Wake-Up Pin 1
`PWR_CR3_EWUP2`		1	Enable Wake-Up Pin 2
`PWR_CR3_EWUP3`		2	Enable Wake-Up Pin 3
`PWR_CR3_EWUP4`		3	Enable Wake-Up Pin 4
`PWR_CR3_EWUP5`		4	Enable Wake-Up Pin 5
`PWR_CR3_RRS`		8	RRS[1:0] bits (Ram retention in STANDBY mode)
`PWR_CR3_APC`		10	Apply pull-up and pull-down configuration
`PWR_CR3_ULPMEN`		11	Ultra Low Power Mode Enable
`PWR_CR3_UCPD_STDBY`		13	UCPD Configuration memorize when enter in STANDBY
`PWR_CR3_UCPD_DBDIS`		14	Dead Battery Behavior Disable
`CR4`	`0x0C`	32	PWR power control register 4
`PWR_CR4_WUPP1`		0	Wake-Up Pin 1 polarity
`PWR_CR4_WUPP2`		1	Wake-Up Pin 2 polarity
`PWR_CR4_WUPP3`		2	Wake-Up Pin 3 polarity
`PWR_CR4_WUPP4`		3	Wake-Up Pin 4 polarity
`PWR_CR4_WUPP5`		4	Wake-Up Pin 5 polarity
`PWR_CR4_VBE`		8	VBAT Battery charging Enable
`PWR_CR4_VBRS`		9	VBAT Battery charging Resistor Selection
`PWR_CR4_SMPSBYP`		12	SMPS Bypass mode
`PWR_CR4_EXTSMPSEN`		13	External SMPS mode
`PWR_CR4_SMPSFSTEN`		14	SMPS fast soft start
`PWR_CR4_SMPSLPEN`		15	SMPS low-power mode
`SR1`	`0x10`	32	PWR power status register 1
`PWR_SR1_WUF`		0:4	Wake-up Flags
`PWR_SR1_WUF1`		0	Wake-up Flag 1
`PWR_SR1_WUF2`		1	Wake-up Flag 2
`PWR_SR1_WUF3`		2	Wake-up Flag 3
`PWR_SR1_WUF4`		3	Wake-up Flag 4
`PWR_SR1_WUF5`		4	Wake-up Flag 5
`PWR_SR1_SBF`		8	Stand-By Flag
`PWR_SR1_SMPSBYPRDY`		12	SMPS Bypass ready
`PWR_SR1_EXTSMPSRDY`		13	External SMPS mode ready
`PWR_SR1_SMPSHPRDY`		15	SMPS High-power mode ready
`SR2`	`0x14`	32	PWR power status register 2
`PWR_SR2_REGLPS`		8	Low-power Regulator Started
`PWR_SR2_REGLPF`		9	Low-power Regulator Flag
`PWR_SR2_VOSF`		10	Voltage Scaling Flag
`PWR_SR2_PVDO`		11	Power Voltage Detector Output
`PWR_SR2_PVMO1`		12	Peripheral Voltage Monitoring Output 1
`PWR_SR2_PVMO2`		13	Peripheral Voltage Monitoring Output 2
`PWR_SR2_PVMO3`		14	Peripheral Voltage Monitoring Output 3
`PWR_SR2_PVMO4`		15	Peripheral Voltage Monitoring Output 4
`SCR`	`0x18`	32	PWR power status clear register
`PWR_SCR_CWUF`		0:4	Clear Wake-up Flags
`PWR_SCR_CWUF1`		0	Clear Wake-up Flag 1
`PWR_SCR_CWUF2`		1	Clear Wake-up Flag 2
`PWR_SCR_CWUF3`		2	Clear Wake-up Flag 3
`PWR_SCR_CWUF4`		3	Clear Wake-up Flag 4
`PWR_SCR_CWUF5`		4	Clear Wake-up Flag 5
`PWR_SCR_CSBF`		8	Clear Stand-By Flag
`PUCRA`	`0x20`	32	Pull_up control register of portA
`PWR_PUCRA_PU0`		0	Port PA0 Pull-Up set
`PWR_PUCRA_PU1`		1	Port PA1 Pull-Up set
`PWR_PUCRA_PU2`		2	Port PA2 Pull-Up set
`PWR_PUCRA_PU3`		3	Port PA3 Pull-Up set
`PWR_PUCRA_PU4`		4	Port PA4 Pull-Up set
`PWR_PUCRA_PU5`		5	Port PA5 Pull-Up set
`PWR_PUCRA_PU6`		6	Port PA6 Pull-Up set
`PWR_PUCRA_PU7`		7	Port PA7 Pull-Up set
`PWR_PUCRA_PU8`		8	Port PA8 Pull-Up set
`PWR_PUCRA_PU9`		9	Port PA9 Pull-Up set
`PWR_PUCRA_PU10`		10	Port PA10 Pull-Up set
`PWR_PUCRA_PU11`		11	Port PA11 Pull-Up set
`PWR_PUCRA_PU12`		12	Port PA12 Pull-Up set
`PWR_PUCRA_PU13`		13	Port PA13 Pull-Up set
`PWR_PUCRA_PU14`		14	Port PA14 Pull-Up set
`PWR_PUCRA_PU15`		15	Port PA15 Pull-Up set
`PDCRA`	`0x24`	32	Pull_Down control register of portA
`PWR_PDCRA_PD0`		0	Port PA0 Pull-Down set
`PWR_PDCRA_PD1`		1	Port PA1 Pull-Down set
`PWR_PDCRA_PD2`		2	Port PA2 Pull-Down set
`PWR_PDCRA_PD3`		3	Port PA3 Pull-Down set
`PWR_PDCRA_PD4`		4	Port PA4 Pull-Down set
`PWR_PDCRA_PD5`		5	Port PA5 Pull-Down set
`PWR_PDCRA_PD6`		6	Port PA6 Pull-Down set
`PWR_PDCRA_PD7`		7	Port PA7 Pull-Down set
`PWR_PDCRA_PD8`		8	Port PA8 Pull-Down set
`PWR_PDCRA_PD9`		9	Port PA9 Pull-Down set
`PWR_PDCRA_PD10`		10	Port PA10 Pull-Down set
`PWR_PDCRA_PD11`		11	Port PA11 Pull-Down set
`PWR_PDCRA_PD12`		12	Port PA12 Pull-Down set
`PWR_PDCRA_PD13`		13	Port PA13 Pull-Down set
`PWR_PDCRA_PD14`		14	Port PA14 Pull-Down set
`PWR_PDCRA_PD15`		15	Port PA15 Pull-Down set
`PUCRB`	`0x28`	32	Pull_up control register of portB
`PWR_PUCRB_PU0`		0	Port PB0 Pull-Up set
`PWR_PUCRB_PU1`		1	Port PB1 Pull-Up set
`PWR_PUCRB_PU2`		2	Port PB2 Pull-Up set
`PWR_PUCRB_PU3`		3	Port PB3 Pull-Up set
`PWR_PUCRB_PU4`		4	Port PB4 Pull-Up set
`PWR_PUCRB_PU5`		5	Port PB5 Pull-Up set
`PWR_PUCRB_PU6`		6	Port PB6 Pull-Up set
`PWR_PUCRB_PU7`		7	Port PB7 Pull-Up set
`PWR_PUCRB_PU8`		8	Port PB8 Pull-Up set
`PWR_PUCRB_PU9`		9	Port PB9 Pull-Up set
`PWR_PUCRB_PU10`		10	Port PB10 Pull-Up set
`PWR_PUCRB_PU11`		11	Port PB11 Pull-Up set
`PWR_PUCRB_PU12`		12	Port PB12 Pull-Up set
`PWR_PUCRB_PU13`		13	Port PB13 Pull-Up set
`PWR_PUCRB_PU14`		14	Port PB14 Pull-Up set
`PWR_PUCRB_PU15`		15	Port PB15 Pull-Up set
`PDCRB`	`0x2C`	32	Pull_Down control register of portB
`PWR_PDCRB_PD0`		0	Port PB0 Pull-Down set
`PWR_PDCRB_PD1`		1	Port PB1 Pull-Down set
`PWR_PDCRB_PD2`		2	Port PB2 Pull-Down set
`PWR_PDCRB_PD3`		3	Port PB3 Pull-Down set
`PWR_PDCRB_PD4`		4	Port PB4 Pull-Down set
`PWR_PDCRB_PD5`		5	Port PB5 Pull-Down set
`PWR_PDCRB_PD6`		6	Port PB6 Pull-Down set
`PWR_PDCRB_PD7`		7	Port PB7 Pull-Down set
`PWR_PDCRB_PD8`		8	Port PB8 Pull-Down set
`PWR_PDCRB_PD9`		9	Port PB9 Pull-Down set
`PWR_PDCRB_PD10`		10	Port PB10 Pull-Down set
`PWR_PDCRB_PD11`		11	Port PB11 Pull-Down set
`PWR_PDCRB_PD12`		12	Port PB12 Pull-Down set
`PWR_PDCRB_PD13`		13	Port PB13 Pull-Down set
`PWR_PDCRB_PD14`		14	Port PB14 Pull-Down set
`PWR_PDCRB_PD15`		15	Port PB15 Pull-Down set
`PUCRC`	`0x30`	32	Pull_up control register of portC
`PWR_PUCRC_PU0`		0	Port PC0 Pull-Up set
`PWR_PUCRC_PU1`		1	Port PC1 Pull-Up set
`PWR_PUCRC_PU2`		2	Port PC2 Pull-Up set
`PWR_PUCRC_PU3`		3	Port PC3 Pull-Up set
`PWR_PUCRC_PU4`		4	Port PC4 Pull-Up set
`PWR_PUCRC_PU5`		5	Port PC5 Pull-Up set
`PWR_PUCRC_PU6`		6	Port PC6 Pull-Up set
`PWR_PUCRC_PU7`		7	Port PC7 Pull-Up set
`PWR_PUCRC_PU8`		8	Port PC8 Pull-Up set
`PWR_PUCRC_PU9`		9	Port PC9 Pull-Up set
`PWR_PUCRC_PU10`		10	Port PC10 Pull-Up set
`PWR_PUCRC_PU11`		11	Port PC11 Pull-Up set
`PWR_PUCRC_PU12`		12	Port PC12 Pull-Up set
`PWR_PUCRC_PU13`		13	Port PC13 Pull-Up set
`PWR_PUCRC_PU14`		14	Port PC14 Pull-Up set
`PWR_PUCRC_PU15`		15	Port PC15 Pull-Up set
`PDCRC`	`0x34`	32	Pull_Down control register of portC
`PWR_PDCRC_PD0`		0	Port PC0 Pull-Down set
`PWR_PDCRC_PD1`		1	Port PC1 Pull-Down set
`PWR_PDCRC_PD2`		2	Port PC2 Pull-Down set
`PWR_PDCRC_PD3`		3	Port PC3 Pull-Down set
`PWR_PDCRC_PD4`		4	Port PC4 Pull-Down set
`PWR_PDCRC_PD5`		5	Port PC5 Pull-Down set
`PWR_PDCRC_PD6`		6	Port PC6 Pull-Down set
`PWR_PDCRC_PD7`		7	Port PC7 Pull-Down set
`PWR_PDCRC_PD8`		8	Port PC8 Pull-Down set
`PWR_PDCRC_PD9`		9	Port PC9 Pull-Down set
`PWR_PDCRC_PD10`		10	Port PC10 Pull-Down set
`PWR_PDCRC_PD11`		11	Port PC11 Pull-Down set
`PWR_PDCRC_PD12`		12	Port PC12 Pull-Down set
`PWR_PDCRC_PD13`		13	Port PC13 Pull-Down set
`PWR_PDCRC_PD14`		14	Port PC14 Pull-Down set
`PWR_PDCRC_PD15`		15	Port PC15 Pull-Down set
`PUCRD`	`0x38`	32	Pull_up control register of portD
`PWR_PUCRD_PU0`		0	Port PD0 Pull-Up set
`PWR_PUCRD_PU1`		1	Port PD1 Pull-Up set
`PWR_PUCRD_PU2`		2	Port PD2 Pull-Up set
`PWR_PUCRD_PU3`		3	Port PD3 Pull-Up set
`PWR_PUCRD_PU4`		4	Port PD4 Pull-Up set
`PWR_PUCRD_PU5`		5	Port PD5 Pull-Up set
`PWR_PUCRD_PU6`		6	Port PD6 Pull-Up set
`PWR_PUCRD_PU7`		7	Port PD7 Pull-Up set
`PWR_PUCRD_PU8`		8	Port PD8 Pull-Up set
`PWR_PUCRD_PU9`		9	Port PD9 Pull-Up set
`PWR_PUCRD_PU10`		10	Port PD10 Pull-Up set
`PWR_PUCRD_PU11`		11	Port PD11 Pull-Up set
`PWR_PUCRD_PU12`		12	Port PD12 Pull-Up set
`PWR_PUCRD_PU13`		13	Port PD13 Pull-Up set
`PWR_PUCRD_PU14`		14	Port PD14 Pull-Up set
`PWR_PUCRD_PU15`		15	Port PD15 Pull-Up set
`PDCRD`	`0x3C`	32	Pull_Down control register of portD
`PWR_PDCRD_PD0`		0	Port PD0 Pull-Down set
`PWR_PDCRD_PD1`		1	Port PD1 Pull-Down set
`PWR_PDCRD_PD2`		2	Port PD2 Pull-Down set
`PWR_PDCRD_PD3`		3	Port PD3 Pull-Down set
`PWR_PDCRD_PD4`		4	Port PD4 Pull-Down set
`PWR_PDCRD_PD5`		5	Port PD5 Pull-Down set
`PWR_PDCRD_PD6`		6	Port PD6 Pull-Down set
`PWR_PDCRD_PD7`		7	Port PD7 Pull-Down set
`PWR_PDCRD_PD8`		8	Port PD8 Pull-Down set
`PWR_PDCRD_PD9`		9	Port PD9 Pull-Down set
`PWR_PDCRD_PD10`		10	Port PD10 Pull-Down set
`PWR_PDCRD_PD11`		11	Port PD11 Pull-Down set
`PWR_PDCRD_PD12`		12	Port PD12 Pull-Down set
`PWR_PDCRD_PD13`		13	Port PD13 Pull-Down set
`PWR_PDCRD_PD14`		14	Port PD14 Pull-Down set
`PWR_PDCRD_PD15`		15	Port PD15 Pull-Down set
`PUCRE`	`0x40`	32	Pull_up control register of portE
`PWR_PUCRE_PU0`		0	Port PE0 Pull-Up set
`PWR_PUCRE_PU1`		1	Port PE1 Pull-Up set
`PWR_PUCRE_PU2`		2	Port PE2 Pull-Up set
`PWR_PUCRE_PU3`		3	Port PE3 Pull-Up set
`PWR_PUCRE_PU4`		4	Port PE4 Pull-Up set
`PWR_PUCRE_PU5`		5	Port PE5 Pull-Up set
`PWR_PUCRE_PU6`		6	Port PE6 Pull-Up set
`PWR_PUCRE_PU7`		7	Port PE7 Pull-Up set
`PWR_PUCRE_PU8`		8	Port PE8 Pull-Up set
`PWR_PUCRE_PU9`		9	Port PE9 Pull-Up set
`PWR_PUCRE_PU10`		10	Port PE10 Pull-Up set
`PWR_PUCRE_PU11`		11	Port PE11 Pull-Up set
`PWR_PUCRE_PU12`		12	Port PE12 Pull-Up set
`PWR_PUCRE_PU13`		13	Port PE13 Pull-Up set
`PWR_PUCRE_PU14`		14	Port PE14 Pull-Up set
`PWR_PUCRE_PU15`		15	Port PE15 Pull-Up set
`PDCRE`	`0x44`	32	Pull_Down control register of portE
`PWR_PDCRE_PD0`		0	Port PE0 Pull-Down set
`PWR_PDCRE_PD1`		1	Port PE1 Pull-Down set
`PWR_PDCRE_PD2`		2	Port PE2 Pull-Down set
`PWR_PDCRE_PD3`		3	Port PE3 Pull-Down set
`PWR_PDCRE_PD4`		4	Port PE4 Pull-Down set
`PWR_PDCRE_PD5`		5	Port PE5 Pull-Down set
`PWR_PDCRE_PD6`		6	Port PE6 Pull-Down set
`PWR_PDCRE_PD7`		7	Port PE7 Pull-Down set
`PWR_PDCRE_PD8`		8	Port PE8 Pull-Down set
`PWR_PDCRE_PD9`		9	Port PE9 Pull-Down set
`PWR_PDCRE_PD10`		10	Port PE10 Pull-Down set
`PWR_PDCRE_PD11`		11	Port PE11 Pull-Down set
`PWR_PDCRE_PD12`		12	Port PE12 Pull-Down set
`PWR_PDCRE_PD13`		13	Port PE13 Pull-Down set
`PWR_PDCRE_PD14`		14	Port PE14 Pull-Down set
`PWR_PDCRE_PD15`		15	Port PE15 Pull-Down set
`PUCRF`	`0x48`	32	Pull_up control register of portF
`PWR_PUCRF_PU0`		0	Port PF0 Pull-Up set
`PWR_PUCRF_PU1`		1	Port PF1 Pull-Up set
`PWR_PUCRF_PU2`		2	Port PF2 Pull-Up set
`PWR_PUCRF_PU3`		3	Port PF3 Pull-Up set
`PWR_PUCRF_PU4`		4	Port PF4 Pull-Up set
`PWR_PUCRF_PU5`		5	Port PF5 Pull-Up set
`PWR_PUCRF_PU6`		6	Port PF6 Pull-Up set
`PWR_PUCRF_PU7`		7	Port PF7 Pull-Up set
`PWR_PUCRF_PU8`		8	Port PF8 Pull-Up set
`PWR_PUCRF_PU9`		9	Port PF9 Pull-Up set
`PWR_PUCRF_PU10`		10	Port PF10 Pull-Up set
`PWR_PUCRF_PU11`		11	Port PF11 Pull-Up set
`PWR_PUCRF_PU12`		12	Port PF12 Pull-Up set
`PWR_PUCRF_PU13`		13	Port PF13 Pull-Up set
`PWR_PUCRF_PU14`		14	Port PF14 Pull-Up set
`PWR_PUCRF_PU15`		15	Port PF15 Pull-Up set
`PDCRF`	`0x4C`	32	Pull_Down control register of portF
`PWR_PDCRF_PD0`		0	Port PF0 Pull-Down set
`PWR_PDCRF_PD1`		1	Port PF1 Pull-Down set
`PWR_PDCRF_PD2`		2	Port PF2 Pull-Down set
`PWR_PDCRF_PD3`		3	Port PF3 Pull-Down set
`PWR_PDCRF_PD4`		4	Port PF4 Pull-Down set
`PWR_PDCRF_PD5`		5	Port PF5 Pull-Down set
`PWR_PDCRF_PD6`		6	Port PF6 Pull-Down set
`PWR_PDCRF_PD7`		7	Port PF7 Pull-Down set
`PWR_PDCRF_PD8`		8	Port PF8 Pull-Down set
`PWR_PDCRF_PD9`		9	Port PF9 Pull-Down set
`PWR_PDCRF_PD10`		10	Port PF10 Pull-Down set
`PWR_PDCRF_PD11`		11	Port PF11 Pull-Down set
`PWR_PDCRF_PD12`		12	Port PF12 Pull-Down set
`PWR_PDCRF_PD13`		13	Port PF13 Pull-Down set
`PWR_PDCRF_PD14`		14	Port PF14 Pull-Down set
`PWR_PDCRF_PD15`		15	Port PF15 Pull-Down set
`PUCRG`	`0x50`	32	Pull_up control register of portG
`PWR_PUCRG_PU0`		0	Port PG0 Pull-Up set
`PWR_PUCRG_PU1`		1	Port PG1 Pull-Up set
`PWR_PUCRG_PU2`		2	Port PG2 Pull-Up set
`PWR_PUCRG_PU3`		3	Port PG3 Pull-Up set
`PWR_PUCRG_PU4`		4	Port PG4 Pull-Up set
`PWR_PUCRG_PU5`		5	Port PG5 Pull-Up set
`PWR_PUCRG_PU6`		6	Port PG6 Pull-Up set
`PWR_PUCRG_PU7`		7	Port PG7 Pull-Up set
`PWR_PUCRG_PU8`		8	Port PG8 Pull-Up set
`PWR_PUCRG_PU9`		9	Port PG9 Pull-Up set
`PWR_PUCRG_PU10`		10	Port PG10 Pull-Up set
`PWR_PUCRG_PU11`		11	Port PG11 Pull-Up set
`PWR_PUCRG_PU12`		12	Port PG12 Pull-Up set
`PWR_PUCRG_PU13`		13	Port PG13 Pull-Up set
`PWR_PUCRG_PU14`		14	Port PG14 Pull-Up set
`PWR_PUCRG_PU15`		15	Port PG15 Pull-Up set
`PDCRG`	`0x54`	32	Pull_Down control register of portG
`PWR_PDCRG_PD0`		0	Port PG0 Pull-Down set
`PWR_PDCRG_PD1`		1	Port PG1 Pull-Down set
`PWR_PDCRG_PD2`		2	Port PG2 Pull-Down set
`PWR_PDCRG_PD3`		3	Port PG3 Pull-Down set
`PWR_PDCRG_PD4`		4	Port PG4 Pull-Down set
`PWR_PDCRG_PD5`		5	Port PG5 Pull-Down set
`PWR_PDCRG_PD6`		6	Port PG6 Pull-Down set
`PWR_PDCRG_PD7`		7	Port PG7 Pull-Down set
`PWR_PDCRG_PD8`		8	Port PG8 Pull-Down set
`PWR_PDCRG_PD9`		9	Port PG9 Pull-Down set
`PWR_PDCRG_PD10`		10	Port PG10 Pull-Down set
`PWR_PDCRG_PD11`		11	Port PG11 Pull-Down set
`PWR_PDCRG_PD12`		12	Port PG12 Pull-Down set
`PWR_PDCRG_PD13`		13	Port PG13 Pull-Down set
`PWR_PDCRG_PD14`		14	Port PG14 Pull-Down set
`PWR_PDCRG_PD15`		15	Port PG15 Pull-Down set
`PUCRH`	`0x58`	32	Pull_up control register of portH
`PWR_PUCRH_PU0`		0	Port PH0 Pull-Up set
`PWR_PUCRH_PU1`		1	Port PH1 Pull-Up set
`PWR_PUCRH_PU2`		2	Port PH2 Pull-Up set
`PWR_PUCRH_PU3`		3	Port PH3 Pull-Up set
`PDCRH`	`0x5C`	32	Pull_Down control register of portH
`PWR_PDCRH_PD0`		0	Port PH0 Pull-Down set
`PWR_PDCRH_PD1`		1	Port PH1 Pull-Down set
`PWR_PDCRH_PD2`		2	Port PH2 Pull-Down set
`PWR_PDCRH_PD3`		3	Port PH3 Pull-Down set
`SECCFGR`	`0x78`	32	PWR secure configuration register
`PWR_SECCFGR_WUPSEC`		0:4	Secure Mode Wake-Up Pins
`PWR_SECCFGR_WUP1SEC`		0	Secure Mode Wake-Up Pin 1
`PWR_SECCFGR_WUP2SEC`		1	Secure Mode Wake-Up Pin 2
`PWR_SECCFGR_WUP3SEC`		2	Secure Mode Wake-Up Pin 3
`PWR_SECCFGR_WUP4SEC`		3	Secure Mode Wake-Up Pin 4
`PWR_SECCFGR_WUP5SEC`		4	Secure Mode Wake-Up Pin 5
`PWR_SECCFGR_LPMSEC`		8	Secure Mode Low Power Modes
`PWR_SECCFGR_VDMSEC`		9	Secure Mode Voltage Detection and Monitoring
`PWR_SECCFGR_VBSEC`		10	Secure Mode VBAT
`PWR_SECCFGR_APCSEC`		11	Secure Mode Pull-Up/Down Control
`PRIVCFGR`	`0x80`	32	PWR privilege configuration register
`PWR_PRIVCFGR_PRIV`		0	Privileged access protection

FLASH — Flash controller (section 11)

Register	Offset	Bits	Purpose
`ACR`	`0x00`	32	FLASH access control register
`FLASH_ACR_LATENCY`		0:3
`FLASH_ACR_RUN_PD`		13	Flash power down mode during run
`FLASH_ACR_SLEEP_PD`		14	Flash power down mode during sleep
`FLASH_ACR_LVEN`		15	LVE A/B Flash pin low
`PDKEYR`	`0x04`	32	FLASH power down key register
`NSKEYR`	`0x08`	32	FLASH non-secure key register
`SECKEYR`	`0x0C`	32	FLASH secure key register
`OPTKEYR`	`0x10`	32	FLASH option key register
`LVEKEYR`	`0x14`	32	FLASH LVE key register
`NSSR`	`0x20`	32	FLASH non-secure status register
`FLASH_NSSR_NSEOP`		0
`FLASH_NSSR_NSOPERR`		1
`FLASH_NSSR_NSPROGERR`		3
`FLASH_NSSR_NSWRPERR`		4
`FLASH_NSSR_NSPGAERR`		5
`FLASH_NSSR_NSSIZERR`		6
`FLASH_NSSR_NSPGSERR`		7
`FLASH_NSSR_OPTWERR`		13
`FLASH_NSSR_NSBSY`		16
`SECSR`	`0x24`	32	FLASH secure status register
`FLASH_SECSR_SECEOP`		0
`FLASH_SECSR_SECOPERR`		1
`FLASH_SECSR_SECPROGERR`		3
`FLASH_SECSR_SECWRPERR`		4
`FLASH_SECSR_SECPGAERR`		5
`FLASH_SECSR_SECSIZERR`		6
`FLASH_SECSR_SECPGSERR`		7
`FLASH_SECSR_SECBSY`		16
`NSCR`	`0x28`	32	FLASH non-secure control register
`FLASH_NSCR_NSPG`		0
`FLASH_NSCR_NSPER`		1
`FLASH_NSCR_NSMER1`		2
`FLASH_NSCR_NSPNB`		3:9
`FLASH_NSCR_NSBKER`		11
`FLASH_NSCR_NSMER2`		15
`FLASH_NSCR_NSSTRT`		16
`FLASH_NSCR_OPTSTRT`		17
`FLASH_NSCR_NSEOPIE`		24
`FLASH_NSCR_NSERRIE`		25
`FLASH_NSCR_OBL_LAUNCH`		27
`FLASH_NSCR_OPTLOCK`		30
`FLASH_NSCR_NSLOCK`		31
`SECCR`	`0x2C`	32	FLASH secure control register
`FLASH_SECCR_SECPG`		0
`FLASH_SECCR_SECPER`		1
`FLASH_SECCR_SECMER1`		2
`FLASH_SECCR_SECPNB`		3:9
`FLASH_SECCR_SECBKER`		11
`FLASH_SECCR_SECMER2`		15
`FLASH_SECCR_SECSTRT`		16
`FLASH_SECCR_SECEOPIE`		24
`FLASH_SECCR_SECERRIE`		25
`FLASH_SECCR_SECINV`		29
`FLASH_SECCR_SECLOCK`		31
`ECCR`	`0x30`	32	FLASH ECC register
`FLASH_ECCR_ADDR_ECC`		0:18
`FLASH_ECCR_BK_ECC`		21
`FLASH_ECCR_SYSF_ECC`		22
`FLASH_ECCR_ECCIE`		24
`FLASH_ECCR_ECCC2`		28
`FLASH_ECCR_ECCD2`		29
`FLASH_ECCR_ECCC`		30
`FLASH_ECCR_ECCD`		31
`OPTR`	`0x40`	32	FLASH option control register
`FLASH_OPTR_RDP`		0:7
`FLASH_OPTR_BOR_LEV`		8:10
`FLASH_OPTR_nRST_STOP`		12
`FLASH_OPTR_nRST_STDBY`		13
`FLASH_OPTR_nRST_SHDW`		14
`FLASH_OPTR_IWDG_SW`		16
`FLASH_OPTR_IWDG_STOP`		17
`FLASH_OPTR_IWDG_STDBY`		18
`FLASH_OPTR_WWDG_SW`		19
`FLASH_OPTR_SWAP_BANK`		20
`FLASH_OPTR_DB256K`		21
`FLASH_OPTR_DBANK`		22
`FLASH_OPTR_SRAM2_PE`		24
`FLASH_OPTR_SRAM2_RST`		25
`FLASH_OPTR_nSWBOOT0`		26
`FLASH_OPTR_nBOOT0`		27
`FLASH_OPTR_PA15_PUPEN`		28
`FLASH_OPTR_TZEN`		31
`NSBOOTADD0R`	`0x44`	32	FLASH non-secure boot address 0 register
`FLASH_NSBOOTADD0R_NSBOOTADD0`		7:31
`NSBOOTADD1R`	`0x48`	32	FLASH non-secure boot address 1 register
`FLASH_NSBOOTADD1R_NSBOOTADD1`		7:31
`SECBOOTADD0R`	`0x4C`	32	FLASH secure boot address 0 register
`FLASH_SECBOOTADD0R_BOOT_LOCK`		0
`FLASH_SECBOOTADD0R_SECBOOTADD0`		7:31
`SECWM1R1`	`0x50`	32	FLASH watermark-based secure register 1 bank 1
`FLASH_SECWM1R1_SECWM1_PSTRT`		0:6
`FLASH_SECWM1R1_SECWM1_PEND`		16:22
`SECWM1R2`	`0x54`	32	FLASH watermark-based secure register 2 bank 1
`FLASH_SECWM1R2_HDP1_PEND`		16:22
`FLASH_SECWM1R2_HDP1EN`		31
`WRP1AR`	`0x58`	32	FLASH WRP area A register bank 1
`FLASH_WRP1AR_WRP1A_PSTRT`		0:6
`FLASH_WRP1AR_WRP1A_PEND`		16:22
`WRP1BR`	`0x5C`	32	FLASH WRP area B register bank 1
`FLASH_WRP1BR_WRP1B_PSTRT`		0:6
`FLASH_WRP1BR_WRP1B_PEND`		16:22
`SECWM2R1`	`0x60`	32	FLASH watermark-based secure register 1 bank 2
`FLASH_SECWM2R1_SECWM2_PSTRT`		0:6
`FLASH_SECWM2R1_SECWM2_PEND`		16:22
`SECWM2R2`	`0x64`	32	FLASH watermark-based secure register 2 bank 2
`FLASH_SECWM2R2_HDP2_PEND`		16:22
`FLASH_SECWM2R2_HDP2EN`		31
`WRP2AR`	`0x68`	32	FLASH WRP area A register bank 2
`FLASH_WRP2AR_WRP2A_PSTRT`		0:6
`FLASH_WRP2AR_WRP2A_PEND`		16:22
`WRP2BR`	`0x6C`	32	FLASH WRP area B register bank 2
`FLASH_WRP2BR_WRP2B_PSTRT`		0:6
`FLASH_WRP2BR_WRP2B_PEND`		16:22
`SECBB1R1`	`0x80`	32	FLASH block-based secure bank 1
`SECBB1R2`	`0x84`	32	FLASH block-based secure bank 1
`SECBB1R3`	`0x88`	32	FLASH block-based secure bank 1
`SECBB1R4`	`0x8C`	32	FLASH block-based secure bank 1
`SECBB2R1`	`0xA0`	32	FLASH block-based secure bank 2
`SECBB2R2`	`0xA4`	32	FLASH block-based secure bank 2
`SECBB2R3`	`0xA8`	32	FLASH block-based secure bank 2
`SECBB2R4`	`0xAC`	32	FLASH block-based secure bank 2
`SECHDPCR`	`0xC0`	32	FLASH secure HDP control register
`FLASH_SECHDPCR_HDP1_ACCDIS`		0
`FLASH_SECHDPCR_HDP2_ACCDIS`		1
`PRIVCFGR`	`0xC4`	32	FLASH privilege configuration register
`FLASH_PRIVCFGR_PRIV`		0

IWDG — Independent watchdog (section 12)

Register	Offset	Bits	Purpose
`KR`	`0x00`	32	IWDG Key register
`IWDG_KR_KEY`		0:15	Key value (write only, read 0000h)
`PR`	`0x04`	32	IWDG Prescaler register
`IWDG_PR_PR`		0:2	PR[2:0] (Prescaler divider)
`RLR`	`0x08`	32	IWDG Reload register
`IWDG_RLR_RL`		0:11	Watchdog counter reload value
`SR`	`0x0C`	32	IWDG Status register
`IWDG_SR_PVU`		0	Watchdog prescaler value update
`IWDG_SR_RVU`		1	Watchdog counter reload value update
`IWDG_SR_WVU`		2	Watchdog counter window value update
`WINR`	`0x10`	32	IWDG Window register
`IWDG_WINR_WIN`		0:11	Watchdog counter window value

WWDG — Window watchdog (section 12)

Register	Offset	Bits	Purpose
`CR`	`0x00`	32	WWDG Control register
`WWDG_CR_T`		0:6	T[6:0] bits (7-Bit counter (MSB to LSB))
`WWDG_CR_WDGA`		7	Activation bit
`CFR`	`0x04`	32	WWDG Configuration register
`WWDG_CFR_W`		0:6	W[6:0] bits (7-bit window value)
`WWDG_CFR_EWI`		9	Early Wakeup Interrupt
`WWDG_CFR_WDGTB`		11:13	WDGTB[2:0] bits (Timer Base)
`SR`	`0x08`	32	WWDG Status register
`WWDG_SR_EWIF`		0	Early Wakeup Interrupt Flag

CRC — Checksum (CRC) (section 12)

Register	Offset	Bits	Purpose
`DR`	`0x00`	32	CRC Data register
`CRC_DR_DR`		0:31	Data register bits
`IDR`	`0x04`	32	CRC Independent data register
`CRC_IDR_IDR`		0:31	General-purpose 32-bits data register bits
`CR`	`0x08`	32	CRC Control register
`CRC_CR_RESET`		0	RESET the CRC computation unit bit
`CRC_CR_POLYSIZE`		3:4	Polynomial size bits
`CRC_CR_REV_IN`		5:6	REV_IN Reverse Input Data bits
`CRC_CR_REV_OUT`		7	REV_OUT Reverse Output Data bits
`INIT`	`0x10`	32	Initial CRC value register
`CRC_INIT_INIT`		0:31	Initial CRC value bits
`POL`	`0x14`	32	CRC polynomial register
`CRC_POL_POL`		0:31	Coefficients of the polynomial

RTC — Real-time clock (section 12)

Register	Offset	Bits	Purpose
`TR`	`0x00`	32	RTC time register
`RTC_TR_SU`		0:3
`RTC_TR_ST`		4:6
`RTC_TR_MNU`		8:11
`RTC_TR_MNT`		12:14
`RTC_TR_HU`		16:19
`RTC_TR_HT`		20:21
`RTC_TR_PM`		22
`DR`	`0x04`	32	RTC date register
`RTC_DR_DU`		0:3
`RTC_DR_DT`		4:5
`RTC_DR_MU`		8:11
`RTC_DR_MT`		12
`RTC_DR_WDU`		13:15
`RTC_DR_YU`		16:19
`RTC_DR_YT`		20:23
`SSR`	`0x08`	32	RTC sub second register
`RTC_SSR_SS`		0:15
`ICSR`	`0x0C`	32	RTC initialization control and status register
`RTC_ICSR_WUTWF`		2
`RTC_ICSR_SHPF`		3
`RTC_ICSR_INITS`		4
`RTC_ICSR_RSF`		5
`RTC_ICSR_INITF`		6
`RTC_ICSR_INIT`		7
`RTC_ICSR_RECALPF`		16
`PRER`	`0x10`	32	RTC prescaler register
`RTC_PRER_PREDIV_S`		0:14
`RTC_PRER_PREDIV_A`		16:22
`WUTR`	`0x14`	32	RTC wakeup timer register
`RTC_WUTR_WUT`		0:15
`RTC_WUTR_WUTOCLR`		16:31
`CR`	`0x18`	32	RTC control register
`RTC_CR_WUCKSEL`		0:2
`RTC_CR_TSEDGE`		3
`RTC_CR_REFCKON`		4
`RTC_CR_BYPSHAD`		5
`RTC_CR_FMT`		6
`RTC_CR_ALRAE`		8
`RTC_CR_ALRBE`		9
`RTC_CR_WUTE`		10
`RTC_CR_TSE`		11
`RTC_CR_ALRAIE`		12
`RTC_CR_ALRBIE`		13
`RTC_CR_WUTIE`		14
`RTC_CR_TSIE`		15
`RTC_CR_ADD1H`		16
`RTC_CR_SUB1H`		17
`RTC_CR_BKP`		18
`RTC_CR_COSEL`		19
`RTC_CR_POL`		20
`RTC_CR_OSEL`		21:22
`RTC_CR_COE`		23
`RTC_CR_ITSE`		24	Timestamp on internal event enable
`RTC_CR_TAMPTS`		25	Activate timestamp on tamper detection event
`RTC_CR_TAMPOE`		26	Tamper detection output enable on TAMPALARM
`RTC_CR_TAMPALRM_PU`		29	TAMPALARM output pull-up config
`RTC_CR_TAMPALRM_TYPE`		30	TAMPALARM output type
`RTC_CR_OUT2EN`		31	RTC_OUT2 output enable
`PRIVCR`	`0x1C`	32	RTC privilege mode control register
`RTC_PRIVCR_ALRAPRIV`		0
`RTC_PRIVCR_ALRBPRIV`		1
`RTC_PRIVCR_WUTPRIV`		2
`RTC_PRIVCR_TSPRIV`		3
`RTC_PRIVCR_CALPRIV`		13
`RTC_PRIVCR_INITPRIV`		14
`RTC_PRIVCR_PRIV`		15
`SMCR`	`0x20`	32	RTC Secure mode control register
`RTC_SMCR_ALRADPROT`		0
`RTC_SMCR_ALRBDPROT`		1
`RTC_SMCR_WUTDPROT`		2
`RTC_SMCR_TSDPROT`		3
`RTC_SMCR_CALDPROT`		13
`RTC_SMCR_INITDPROT`		14
`RTC_SMCR_DECPROT`		15
`WPR`	`0x24`	32	RTC write protection register
`RTC_WPR_KEY`		0:7
`CALR`	`0x28`	32	RTC calibration register
`RTC_CALR_CALM`		0:8
`RTC_CALR_LPCAL`		12
`RTC_CALR_CALW16`		13
`RTC_CALR_CALW8`		14
`RTC_CALR_CALP`		15
`SHIFTR`	`0x2C`	32	RTC shift control register
`RTC_SHIFTR_SUBFS`		0:14
`RTC_SHIFTR_ADD1S`		31
`TSTR`	`0x30`	32	RTC time stamp time register
`RTC_TSTR_SU`		0:3
`RTC_TSTR_ST`		4:6
`RTC_TSTR_MNU`		8:11
`RTC_TSTR_MNT`		12:14
`RTC_TSTR_HU`		16:19
`RTC_TSTR_HT`		20:21
`RTC_TSTR_PM`		22
`TSDR`	`0x34`	32	RTC time stamp date register
`RTC_TSDR_DU`		0:3
`RTC_TSDR_DT`		4:5
`RTC_TSDR_MU`		8:11
`RTC_TSDR_MT`		12
`RTC_TSDR_WDU`		13:15
`TSSSR`	`0x38`	32	RTC time-stamp sub second register
`RTC_TSSSR_SS`		0:15
`ALRMAR`	`0x40`	32	RTC alarm A register
`RTC_ALRMAR_SU`		0:3
`RTC_ALRMAR_ST`		4:6
`RTC_ALRMAR_MSK1`		7
`RTC_ALRMAR_MNU`		8:11
`RTC_ALRMAR_MNT`		12:14
`RTC_ALRMAR_MSK2`		15
`RTC_ALRMAR_HU`		16:19
`RTC_ALRMAR_HT`		20:21
`RTC_ALRMAR_PM`		22
`RTC_ALRMAR_MSK3`		23
`RTC_ALRMAR_DU`		24:27
`RTC_ALRMAR_DT`		28:29
`RTC_ALRMAR_WDSEL`		30
`RTC_ALRMAR_MSK4`		31
`ALRMASSR`	`0x44`	32	RTC alarm A sub second register
`RTC_ALRMASSR_SS`		0:14
`RTC_ALRMASSR_MASKSS`		24:27
`ALRMBR`	`0x48`	32	RTC alarm B register
`RTC_ALRMBR_SU`		0:3
`RTC_ALRMBR_ST`		4:6
`RTC_ALRMBR_MSK1`		7
`RTC_ALRMBR_MNU`		8:11
`RTC_ALRMBR_MNT`		12:14
`RTC_ALRMBR_MSK2`		15
`RTC_ALRMBR_HU`		16:19
`RTC_ALRMBR_HT`		20:21
`RTC_ALRMBR_PM`		22
`RTC_ALRMBR_MSK3`		23
`RTC_ALRMBR_DU`		24:27
`RTC_ALRMBR_DT`		28:29
`RTC_ALRMBR_WDSEL`		30
`RTC_ALRMBR_MSK4`		31
`ALRMBSSR`	`0x4C`	32	RTC alarm B sub second register
`RTC_ALRMBSSR_SS`		0:14
`RTC_ALRMBSSR_MASKSS`		24:27
`SR`	`0x50`	32	RTC Status register
`RTC_SR_ALRAF`		0
`RTC_SR_ALRBF`		1
`RTC_SR_WUTF`		2
`RTC_SR_TSF`		3
`RTC_SR_TSOVF`		4
`RTC_SR_ITSF`		5
`MISR`	`0x54`	32	RTC masked interrupt status register
`RTC_MISR_ALRAMF`		0
`RTC_MISR_ALRBMF`		1
`RTC_MISR_WUTMF`		2
`RTC_MISR_TSMF`		3
`RTC_MISR_TSOVMF`		4
`RTC_MISR_ITSMF`		5
`SMISR`	`0x58`	32	RTC secure masked interrupt status register
`RTC_SMISR_ALRAMF`		0
`RTC_SMISR_ALRBMF`		1
`RTC_SMISR_WUTMF`		2
`RTC_SMISR_TSMF`		3
`RTC_SMISR_TSOVMF`		4
`RTC_SMISR_ITSMF`		5
`SCR`	`0x5C`	32	RTC status Clear register
`RTC_SCR_CALRAF`		0
`RTC_SCR_CALRBF`		1
`RTC_SCR_CWUTF`		2
`RTC_SCR_CTSF`		3
`RTC_SCR_CTSOVF`		4
`RTC_SCR_CITSF`		5

TAMP — Tamper detection and backup registers (section 12)

Register	Offset	Bits	Purpose
`CR1`	`0x00`	32	TAMP configuration register 1
`TAMP_CR1_TAMP1E`		0
`TAMP_CR1_TAMP2E`		1
`TAMP_CR1_TAMP3E`		2
`TAMP_CR1_TAMP4E`		3
`TAMP_CR1_TAMP5E`		4
`TAMP_CR1_TAMP6E`		5
`TAMP_CR1_TAMP7E`		6
`TAMP_CR1_TAMP8E`		7
`TAMP_CR1_ITAMP1E`		16
`TAMP_CR1_ITAMP2E`		18
`TAMP_CR1_ITAMP3E`		18
`TAMP_CR1_ITAMP5E`		20
`TAMP_CR1_ITAMP8E`		23
`CR2`	`0x04`	32	TAMP configuration register 2
`TAMP_CR2_TAMP1NOERASE`		0
`TAMP_CR2_TAMP2NOERASE`		1
`TAMP_CR2_TAMP3NOERASE`		2
`TAMP_CR2_TAMP4NOERASE`		3
`TAMP_CR2_TAMP5NOERASE`		4
`TAMP_CR2_TAMP6NOERASE`		5
`TAMP_CR2_TAMP7NOERASE`		6
`TAMP_CR2_TAMP8NOERASE`		7
`TAMP_CR2_TAMP1MSK`		16
`TAMP_CR2_TAMP2MSK`		17
`TAMP_CR2_TAMP3MSK`		18
`TAMP_CR2_BKERASE`		23
`TAMP_CR2_TAMP1TRG`		24
`TAMP_CR2_TAMP2TRG`		25
`TAMP_CR2_TAMP3TRG`		25
`TAMP_CR2_TAMP4TRG`		25
`TAMP_CR2_TAMP5TRG`		25
`TAMP_CR2_TAMP6TRG`		25
`TAMP_CR2_TAMP7TRG`		25
`TAMP_CR2_TAMP8TRG`		25
`CR3`	`0x08`	32	TAMP configuration register 3
`TAMP_CR3_ITAMP1NOER`		0
`TAMP_CR3_ITAMP2NOER`		1
`TAMP_CR3_ITAMP3NOER`		2
`TAMP_CR3_ITAMP5NOER`		4
`TAMP_CR3_ITAMP8NOER`		6
`FLTCR`	`0x0C`	32	TAMP filter control register
`TAMP_FLTCR_TAMPFREQ`		0:2
`TAMP_FLTCR_TAMPFLT`		3:4
`TAMP_FLTCR_TAMPPRCH`		5:6
`TAMP_FLTCR_TAMPPUDIS`		7
`ATCR1`	`0x10`	32	TAMP active tamper control register 1
`TAMP_ATCR1_TAMP1AM`		0
`TAMP_ATCR1_TAMP2AM`		1
`TAMP_ATCR1_TAMP3AM`		2
`TAMP_ATCR1_TAMP4AM`		3
`TAMP_ATCR1_TAMP5AM`		4
`TAMP_ATCR1_TAMP6AM`		5
`TAMP_ATCR1_TAMP7AM`		6
`TAMP_ATCR1_TAMP8AM`		7
`TAMP_ATCR1_ATOSEL1`		8:9
`TAMP_ATCR1_ATOSEL2`		10:11
`TAMP_ATCR1_ATOSEL3`		12:13
`TAMP_ATCR1_ATOSEL4`		14:15
`TAMP_ATCR1_ATCKSEL`		16:18
`TAMP_ATCR1_ATPER`		24:26
`TAMP_ATCR1_ATOSHARE`		30
`TAMP_ATCR1_FLTEN`		31
`ATSEEDR`	`0x14`	32	TAMP active tamper seed register
`TAMP_ATSEEDR_SEED`		0:31
`ATOR`	`0x18`	32	TAMP active tamper output register
`TAMP_ATOR_PRNG`		0:7
`ATCR2`	`0x1C`	32	TAMP active tamper control register 2
`TAMP_ATCR2_ATOSEL1`		8:10
`TAMP_ATCR2_ATOSEL2`		11:13
`TAMP_ATCR2_ATOSEL3`		14:16
`TAMP_ATCR2_ATOSEL4`		17:19
`TAMP_ATCR2_ATOSEL5`		20:22
`TAMP_ATCR2_ATOSEL6`		23:25
`TAMP_ATCR2_ATOSEL7`		26:28
`TAMP_ATCR2_ATOSEL8`		29:31
`SMCR`	`0x20`	32	TAMP secure mode control register
`TAMP_SMCR_BKPRWDPROT`		0:7
`TAMP_SMCR_BKPWDPROT`		16:23
`TAMP_SMCR_TAMPDPROT`		31
`PRIVCR`	`0x24`	32	TAMP privilege mode control register
`TAMP_PRIVCR_BKPRWPRIV`		29
`TAMP_PRIVCR_BKPWPRIV`		30
`TAMP_PRIVCR_TAMPPRIV`		31
`IER`	`0x2C`	32	TAMP interrupt enable register
`TAMP_IER_TAMP1IE`		0
`TAMP_IER_TAMP2IE`		1
`TAMP_IER_TAMP3IE`		2
`TAMP_IER_TAMP4IE`		3
`TAMP_IER_TAMP5IE`		4
`TAMP_IER_TAMP6IE`		5
`TAMP_IER_TAMP7IE`		6
`TAMP_IER_TAMP8IE`		7
`TAMP_IER_ITAMP1IE`		16
`TAMP_IER_ITAMP2IE`		17
`TAMP_IER_ITAMP3IE`		18
`TAMP_IER_ITAMP5IE`		20
`TAMP_IER_ITAMP8IE`		22
`SR`	`0x30`	32	TAMP status register
`TAMP_SR_TAMP1F`		0
`TAMP_SR_TAMP2F`		1
`TAMP_SR_TAMP3F`		2
`TAMP_SR_TAMP4F`		3
`TAMP_SR_TAMP5F`		4
`TAMP_SR_TAMP6F`		5
`TAMP_SR_TAMP7F`		6
`TAMP_SR_TAMP8F`		7
`TAMP_SR_ITAMP1F`		16
`TAMP_SR_ITAMP2F`		16
`TAMP_SR_ITAMP3F`		18
`TAMP_SR_ITAMP5F`		20
`TAMP_SR_ITAMP8F`		22
`MISR`	`0x34`	32	TAMP masked interrupt status register
`TAMP_MISR_TAMP1MF`		0
`TAMP_MISR_TAMP2MF`		1
`TAMP_MISR_TAMP3MF`		2
`TAMP_MISR_TAMP4MF`		3
`TAMP_MISR_TAMP5MF`		4
`TAMP_MISR_TAMP6MF`		5
`TAMP_MISR_TAMP7MF`		6
`TAMP_MISR_TAMP8MF`		7
`TAMP_MISR_ITAMP1MF`		16
`TAMP_MISR_ITAMP2MF`		16
`TAMP_MISR_ITAMP3MF`		18
`TAMP_MISR_ITAMP5MF`		20
`TAMP_MISR_ITAMP8MF`		22
`SMISR`	`0x38`	32	TAMP secure masked interrupt status register
`TAMP_SMISR_TAMP1MF`		0
`TAMP_SMISR_TAMP2MF`		1
`TAMP_SMISR_TAMP3MF`		2
`TAMP_SMISR_TAMP4MF`		3
`TAMP_SMISR_TAMP5MF`		4
`TAMP_SMISR_TAMP6MF`		5
`TAMP_SMISR_TAMP7MF`		6
`TAMP_SMISR_TAMP8MF`		7
`TAMP_SMISR_ITAMP1MF`		16
`TAMP_SMISR_ITAMP2MF`		16
`TAMP_SMISR_ITAMP3MF`		18
`TAMP_SMISR_ITAMP5MF`		20
`TAMP_SMISR_ITAMP8MF`		22
`SCR`	`0x3C`	32	TAMP status clear register
`TAMP_SCR_CTAMP1F`		0
`TAMP_SCR_CTAMP2F`		1
`TAMP_SCR_CTAMP3F`		2
`TAMP_SCR_CTAMP4F`		3
`TAMP_SCR_CTAMP5F`		4
`TAMP_SCR_CTAMP6F`		5
`TAMP_SCR_CTAMP7F`		6
`TAMP_SCR_CTAMP8F`		7
`TAMP_SCR_CITAMP1F`		16
`TAMP_SCR_CITAMP2F`		16
`TAMP_SCR_CITAMP3F`		18
`TAMP_SCR_CITAMP5F`		20
`TAMP_SCR_CITAMP8F`		22
`COUNTR`	`0x40`	32	TAMP monotonic counter register
`CFGR`	`0x50`	32	TAMP configuration register
`TAMP_CFGR_TMONEN`		1
`TAMP_CFGR_VMONEN`		2
`TAMP_CFGR_WUTMONEN`		3
`BKP0R`	`0x100`	32	TAMP backup register 0
`BKP1R`	`0x104`	32	TAMP backup register 1
`BKP2R`	`0x108`	32	TAMP backup register 2
`BKP3R`	`0x10C`	32	TAMP backup register 3
`BKP4R`	`0x110`	32	TAMP backup register 4
`BKP5R`	`0x114`	32	TAMP backup register 5
`BKP6R`	`0x118`	32	TAMP backup register 6
`BKP7R`	`0x11C`	32	TAMP backup register 7
`BKP8R`	`0x120`	32	TAMP backup register 8
`BKP9R`	`0x124`	32	TAMP backup register 9
`BKP10R`	`0x128`	32	TAMP backup register 10
`BKP11R`	`0x12C`	32	TAMP backup register 11
`BKP12R`	`0x130`	32	TAMP backup register 12
`BKP13R`	`0x134`	32	TAMP backup register 13
`BKP14R`	`0x138`	32	TAMP backup register 14
`BKP15R`	`0x13C`	32	TAMP backup register 15
`BKP16R`	`0x140`	32	TAMP backup register 16
`BKP17R`	`0x144`	32	TAMP backup register 17
`BKP18R`	`0x148`	32	TAMP backup register 18
`BKP19R`	`0x14C`	32	TAMP backup register 19
`BKP20R`	`0x150`	32	TAMP backup register 20
`BKP21R`	`0x154`	32	TAMP backup register 21
`BKP22R`	`0x158`	32	TAMP backup register 22
`BKP23R`	`0x15C`	32	TAMP backup register 23
`BKP24R`	`0x160`	32	TAMP backup register 24
`BKP25R`	`0x164`	32	TAMP backup register 25
`BKP26R`	`0x168`	32	TAMP backup register 26
`BKP27R`	`0x16C`	32	TAMP backup register 27
`BKP28R`	`0x170`	32	TAMP backup register 28
`BKP29R`	`0x174`	32	TAMP backup register 29
`BKP30R`	`0x178`	32	TAMP backup register 30
`BKP31R`	`0x17C`	32	TAMP backup register 31

TIM — Timers (section 13)

Register	Offset	Bits	Purpose
`CR1`	`0x00`	32	TIM control register 1
`TIM_CR1_CEN`		0	Counter enable
`TIM_CR1_UDIS`		1	Update disable
`TIM_CR1_URS`		2	Update request source
`TIM_CR1_OPM`		3	One pulse mode
`TIM_CR1_DIR`		4	Direction
`TIM_CR1_CMS`		5:6	CMS[1:0] bits (Center-aligned mode selection)
`TIM_CR1_ARPE`		7	Auto-reload preload enable
`TIM_CR1_CKD`		8:9	CKD[1:0] bits (clock division)
`TIM_CR1_UIFREMAP`		11	Update interrupt flag remap
`CR2`	`0x04`	32	TIM control register 2
`TIM_CR2_CCPC`		0	Capture/Compare Preloaded Control
`TIM_CR2_CCUS`		2	Capture/Compare Control Update Selection
`TIM_CR2_CCDS`		3	Capture/Compare DMA Selection
`TIM_CR2_MMS`		4:6	MMS[2:0] bits (Master Mode Selection)
`TIM_CR2_TI1S`		7	TI1 Selection
`TIM_CR2_OIS1`		8	Output Idle state 1 (OC1 output)
`TIM_CR2_OIS1N`		9	Output Idle state 1 (OC1N output)
`TIM_CR2_OIS2`		10	Output Idle state 2 (OC2 output)
`TIM_CR2_OIS2N`		11	Output Idle state 2 (OC2N output)
`TIM_CR2_OIS3`		12	Output Idle state 3 (OC3 output)
`TIM_CR2_OIS3N`		13	Output Idle state 3 (OC3N output)
`TIM_CR2_OIS4`		14	Output Idle state 4 (OC4 output)
`TIM_CR2_OIS5`		16	Output Idle state 5 (OC5 output)
`TIM_CR2_OIS6`		18	Output Idle state 6 (OC6 output)
`TIM_CR2_MMS2`		20:23	MMS[2:0] bits (Master Mode Selection)
`SMCR`	`0x08`	32	TIM slave mode control register
`TIM_SMCR_SMS`		0:16	SMS[2:0] bits (Slave mode selection)
`TIM_SMCR_TS`		4:21	TS[2:0] bits (Trigger selection)
`TIM_SMCR_MSM`		7	Master/slave mode
`TIM_SMCR_ETF`		8:11	ETF[3:0] bits (External trigger filter)
`TIM_SMCR_ETPS`		12:13	ETPS[1:0] bits (External trigger prescaler)
`TIM_SMCR_ECE`		14	External clock enable
`TIM_SMCR_ETP`		15	External trigger polarity
`DIER`	`0x0C`	32	TIM DMA/interrupt enable register
`TIM_DIER_UIE`		0	Update interrupt enable
`TIM_DIER_CC1IE`		1	Capture/Compare 1 interrupt enable
`TIM_DIER_CC2IE`		2	Capture/Compare 2 interrupt enable
`TIM_DIER_CC3IE`		3	Capture/Compare 3 interrupt enable
`TIM_DIER_CC4IE`		4	Capture/Compare 4 interrupt enable
`TIM_DIER_COMIE`		5	COM interrupt enable
`TIM_DIER_TIE`		6	Trigger interrupt enable
`TIM_DIER_BIE`		7	Break interrupt enable
`TIM_DIER_UDE`		8	Update DMA request enable
`TIM_DIER_CC1DE`		9	Capture/Compare 1 DMA request enable
`TIM_DIER_CC2DE`		10	Capture/Compare 2 DMA request enable
`TIM_DIER_CC3DE`		11	Capture/Compare 3 DMA request enable
`TIM_DIER_CC4DE`		12	Capture/Compare 4 DMA request enable
`TIM_DIER_COMDE`		13	COM DMA request enable
`TIM_DIER_TDE`		14	Trigger DMA request enable
`SR`	`0x10`	32	TIM status register
`TIM_SR_UIF`		0	Update interrupt Flag
`TIM_SR_CC1IF`		1	Capture/Compare 1 interrupt Flag
`TIM_SR_CC2IF`		2	Capture/Compare 2 interrupt Flag
`TIM_SR_CC3IF`		3	Capture/Compare 3 interrupt Flag
`TIM_SR_CC4IF`		4	Capture/Compare 4 interrupt Flag
`TIM_SR_COMIF`		5	COM interrupt Flag
`TIM_SR_TIF`		6	Trigger interrupt Flag
`TIM_SR_BIF`		7	Break interrupt Flag
`TIM_SR_B2IF`		8	Break 2 interrupt Flag
`TIM_SR_CC1OF`		9	Capture/Compare 1 Overcapture Flag
`TIM_SR_CC2OF`		10	Capture/Compare 2 Overcapture Flag
`TIM_SR_CC3OF`		11	Capture/Compare 3 Overcapture Flag
`TIM_SR_CC4OF`		12	Capture/Compare 4 Overcapture Flag
`TIM_SR_SBIF`		13	System Break interrupt Flag
`TIM_SR_CC5IF`		16	Capture/Compare 5 interrupt Flag
`TIM_SR_CC6IF`		17	Capture/Compare 6 interrupt Flag
`EGR`	`0x14`	32	TIM event generation register
`TIM_EGR_UG`		0	Update Generation
`TIM_EGR_CC1G`		1	Capture/Compare 1 Generation
`TIM_EGR_CC2G`		2	Capture/Compare 2 Generation
`TIM_EGR_CC3G`		3	Capture/Compare 3 Generation
`TIM_EGR_CC4G`		4	Capture/Compare 4 Generation
`TIM_EGR_COMG`		5	Capture/Compare Control Update Generation
`TIM_EGR_TG`		6	Trigger Generation
`TIM_EGR_BG`		7	Break Generation
`TIM_EGR_B2G`		8	Break 2 Generation
`CCMR1`	`0x18`	32	TIM capture/compare mode register 1
`TIM_CCMR1_CC1S`		0:1	CC1S[1:0] bits (Capture/Compare 1 Selection)
`TIM_CCMR1_OC1FE`		2	Output Compare 1 Fast enable
`TIM_CCMR1_IC1PSC`		2:3	IC1PSC[1:0] bits (Input Capture 1 Prescaler)
`TIM_CCMR1_OC1PE`		3	Output Compare 1 Preload enable
`TIM_CCMR1_OC1M`		4:16	OC1M[2:0] bits (Output Compare 1 Mode)
`TIM_CCMR1_IC1F`		4:7	IC1F[3:0] bits (Input Capture 1 Filter)
`TIM_CCMR1_OC1CE`		7	Output Compare 1 Clear Enable
`TIM_CCMR1_CC2S`		8:9	CC2S[1:0] bits (Capture/Compare 2 Selection)
`TIM_CCMR1_OC2FE`		10	Output Compare 2 Fast enable
`TIM_CCMR1_IC2PSC`		10:11	IC2PSC[1:0] bits (Input Capture 2 Prescaler)
`TIM_CCMR1_OC2PE`		11	Output Compare 2 Preload enable
`TIM_CCMR1_OC2M`		12:24	OC2M[2:0] bits (Output Compare 2 Mode)
`TIM_CCMR1_IC2F`		12:15	IC2F[3:0] bits (Input Capture 2 Filter)
`TIM_CCMR1_OC2CE`		15	Output Compare 2 Clear Enable
`CCMR2`	`0x1C`	32	TIM capture/compare mode register 2
`TIM_CCMR2_CC3S`		0:1	CC3S[1:0] bits (Capture/Compare 3 Selection)
`TIM_CCMR2_OC3FE`		2	Output Compare 3 Fast enable
`TIM_CCMR2_IC3PSC`		2:3	IC3PSC[1:0] bits (Input Capture 3 Prescaler)
`TIM_CCMR2_OC3PE`		3	Output Compare 3 Preload enable
`TIM_CCMR2_OC3M`		4:16	OC3M[2:0] bits (Output Compare 3 Mode)
`TIM_CCMR2_IC3F`		4:7	IC3F[3:0] bits (Input Capture 3 Filter)
`TIM_CCMR2_OC3CE`		7	Output Compare 3 Clear Enable
`TIM_CCMR2_CC4S`		8:9	CC4S[1:0] bits (Capture/Compare 4 Selection)
`TIM_CCMR2_OC4FE`		10	Output Compare 4 Fast enable
`TIM_CCMR2_IC4PSC`		10:11	IC4PSC[1:0] bits (Input Capture 4 Prescaler)
`TIM_CCMR2_OC4PE`		11	Output Compare 4 Preload enable
`TIM_CCMR2_OC4M`		12:24	OC4M[2:0] bits (Output Compare 4 Mode)
`TIM_CCMR2_IC4F`		12:15	IC4F[3:0] bits (Input Capture 4 Filter)
`TIM_CCMR2_OC4CE`		15	Output Compare 4 Clear Enable
`CCER`	`0x20`	32	TIM capture/compare enable register
`TIM_CCER_CC1E`		0	Capture/Compare 1 output enable
`TIM_CCER_CC1P`		1	Capture/Compare 1 output Polarity
`TIM_CCER_CC1NE`		2	Capture/Compare 1 Complementary output enable
`TIM_CCER_CC1NP`		3	Capture/Compare 1 Complementary output Polarity
`TIM_CCER_CC2E`		4	Capture/Compare 2 output enable
`TIM_CCER_CC2P`		5	Capture/Compare 2 output Polarity
`TIM_CCER_CC2NE`		6	Capture/Compare 2 Complementary output enable
`TIM_CCER_CC2NP`		7	Capture/Compare 2 Complementary output Polarity
`TIM_CCER_CC3E`		8	Capture/Compare 3 output enable
`TIM_CCER_CC3P`		9	Capture/Compare 3 output Polarity
`TIM_CCER_CC3NE`		10	Capture/Compare 3 Complementary output enable
`TIM_CCER_CC3NP`		11	Capture/Compare 3 Complementary output Polarity
`TIM_CCER_CC4E`		12	Capture/Compare 4 output enable
`TIM_CCER_CC4P`		13	Capture/Compare 4 output Polarity
`TIM_CCER_CC4NP`		15	Capture/Compare 4 Complementary output Polarity
`TIM_CCER_CC5E`		16	Capture/Compare 5 output enable
`TIM_CCER_CC5P`		17	Capture/Compare 5 output Polarity
`TIM_CCER_CC6E`		20	Capture/Compare 6 output enable
`TIM_CCER_CC6P`		21	Capture/Compare 6 output Polarity
`CNT`	`0x24`	32	TIM counter register
`TIM_CNT_CNT`		0:31	Counter Value
`TIM_CNT_UIFCPY`		31	Update interrupt flag copy (if UIFREMAP=1)
`PSC`	`0x28`	32	TIM prescaler register
`TIM_PSC_PSC`		0:15	Prescaler Value
`ARR`	`0x2C`	32	TIM auto-reload register
`TIM_ARR_ARR`		0:31	Actual auto-reload Value
`RCR`	`0x30`	32	TIM repetition counter register
`TIM_RCR_REP`		0:15	Repetition Counter Value
`CCR1`	`0x34`	32	TIM capture/compare register 1
`TIM_CCR1_CCR1`		0:15	Capture/Compare 1 Value
`CCR2`	`0x38`	32	TIM capture/compare register 2
`TIM_CCR2_CCR2`		0:15	Capture/Compare 2 Value
`CCR3`	`0x3C`	32	TIM capture/compare register 3
`TIM_CCR3_CCR3`		0:15	Capture/Compare 3 Value
`CCR4`	`0x40`	32	TIM capture/compare register 4
`TIM_CCR4_CCR4`		0:15	Capture/Compare 4 Value
`BDTR`	`0x44`	32	TIM break and dead-time register
`TIM_BDTR_DTG`		0:7	DTG[0:7] bits (Dead-Time Generator set-up)
`TIM_BDTR_LOCK`		8:9	LOCK[1:0] bits (Lock Configuration)
`TIM_BDTR_OSSI`		10	Off-State Selection for Idle mode
`TIM_BDTR_OSSR`		11	Off-State Selection for Run mode
`TIM_BDTR_BKE`		12	Break enable for Break 1
`TIM_BDTR_BKP`		13	Break Polarity for Break 1
`TIM_BDTR_AOE`		14	Automatic Output enable
`TIM_BDTR_MOE`		15	Main Output enable
`TIM_BDTR_BKF`		16:19	Break Filter for Break 1
`TIM_BDTR_BK2F`		20:23	Break Filter for Break 2
`TIM_BDTR_BK2E`		24	Break enable for Break 2
`TIM_BDTR_BK2P`		25	Break Polarity for Break 2
`TIM_BDTR_BKDSRM`		26	Break disarming/re-arming
`TIM_BDTR_BK2DSRM`		27	Break2 disarming/re-arming
`TIM_BDTR_BKBID`		28	Break BIDirectional
`TIM_BDTR_BK2BID`		29	Break2 BIDirectional
`DCR`	`0x48`	32	TIM DMA control register
`TIM_DCR_DBA`		0:4	DBA[4:0] bits (DMA Base Address)
`TIM_DCR_DBL`		8:12	DBL[4:0] bits (DMA Burst Length)
`DMAR`	`0x4C`	32	TIM DMA address for full transfer
`TIM_DMAR_DMAB`		0:15	DMA register for burst accesses
`OR1`	`0x50`	32	TIM option register 1
`CCMR3`	`0x54`	32	TIM capture/compare mode register 3
`TIM_CCMR3_OC5FE`		2	Output Compare 5 Fast enable
`TIM_CCMR3_OC5PE`		3	Output Compare 5 Preload enable
`TIM_CCMR3_OC5M`		4:16	OC5M[3:0] bits (Output Compare 5 Mode)
`TIM_CCMR3_OC5CE`		7	Output Compare 5 Clear Enable
`TIM_CCMR3_OC6FE`		10	Output Compare 6 Fast enable
`TIM_CCMR3_OC6PE`		11	Output Compare 6 Preload enable
`TIM_CCMR3_OC6M`		12:24	OC6M[3:0] bits (Output Compare 6 Mode)
`TIM_CCMR3_OC6CE`		15	Output Compare 6 Clear Enable
`CCR5`	`0x58`	32	TIM capture/compare register5
`TIM_CCR5_CCR5`		0:31	Capture/Compare 5 Value
`TIM_CCR5_GC5C1`		29	Group Channel 5 and Channel 1
`TIM_CCR5_GC5C2`		30	Group Channel 5 and Channel 2
`TIM_CCR5_GC5C3`		31	Group Channel 5 and Channel 3
`CCR6`	`0x5C`	32	TIM capture/compare register6
`TIM_CCR6_CCR6`		0:15	Capture/Compare 6 Value
`OR2`	`0x60`	32	TIM option register 2
`OR3`	`0x64`	32	TIM option register 3

LPTIM — Low-power timer (section 46)

Register	Offset	Bits	Purpose
`ISR`	`0x00`	32	LPTIM Interrupt and Status register
`LPTIM_ISR_CMPM`		0	Compare match
`LPTIM_ISR_ARRM`		1	Autoreload match
`LPTIM_ISR_EXTTRIG`		2	External trigger edge event
`LPTIM_ISR_CMPOK`		3	Compare register update OK
`LPTIM_ISR_ARROK`		4	Autoreload register update OK
`LPTIM_ISR_UP`		5	Counter direction change down to up
`LPTIM_ISR_DOWN`		6	Counter direction change up to down
`LPTIM_ISR_UE`		7	Update event occurrence
`LPTIM_ISR_REPOK`		8	Repetition register update OK
`ICR`	`0x04`	32	LPTIM Interrupt Clear register
`LPTIM_ICR_CMPMCF`		0	Compare match Clear Flag
`LPTIM_ICR_ARRMCF`		1	Autoreload match Clear Flag
`LPTIM_ICR_EXTTRIGCF`		2	External trigger edge event Clear Flag
`LPTIM_ICR_CMPOKCF`		3	Compare register update OK Clear Flag
`LPTIM_ICR_ARROKCF`		4	Autoreload register update OK Clear Flag
`LPTIM_ICR_UPCF`		5	Counter direction change down to up Clear Flag
`LPTIM_ICR_DOWNCF`		6	Counter direction change up to down Clear Flag
`LPTIM_ICR_UECF`		7	Update event Clear Flag
`LPTIM_ICR_REPOKCF`		8	Repetition register update OK Clear Flag
`IER`	`0x08`	32	LPTIM Interrupt Enable register
`LPTIM_IER_CMPMIE`		0	Compare match Interrupt Enable
`LPTIM_IER_ARRMIE`		1	Autoreload match Interrupt Enable
`LPTIM_IER_EXTTRIGIE`		2	External trigger edge event Interrupt Enable
`LPTIM_IER_CMPOKIE`		3	Compare register update OK Interrupt Enable
`LPTIM_IER_ARROKIE`		4	Autoreload register update OK Interrupt Enable
`LPTIM_IER_UPIE`		5	Counter direction change down to up Interrupt Enable
`LPTIM_IER_DOWNIE`		6	Counter direction change up to down Interrupt Enable
`LPTIM_IER_UEIE`		7	Update event Interrupt Enable
`LPTIM_IER_REPOKIE`		8	Repetition register update OK Interrupt Enable
`CFGR`	`0x0C`	32	LPTIM Configuration register
`LPTIM_CFGR_CKSEL`		0	Clock selector
`LPTIM_CFGR_CKPOL`		1:2	CKPOL[1:0] bits (Clock polarity)
`LPTIM_CFGR_CKFLT`		3:4	CKFLT[1:0] bits (Configurable digital filter for external clock)
`LPTIM_CFGR_TRGFLT`		6:7	TRGFLT[1:0] bits (Configurable digital filter for trigger)
`LPTIM_CFGR_PRESC`		9:11	PRESC[2:0] bits (Clock prescaler)
`LPTIM_CFGR_TRIGSEL`		13:15	TRIGSEL[2:0]] bits (Trigger selector)
`LPTIM_CFGR_TRIGEN`		17:18	TRIGEN[1:0] bits (Trigger enable and polarity)
`LPTIM_CFGR_TIMOUT`		19	Timeout enable
`LPTIM_CFGR_WAVE`		20	Waveform shape
`LPTIM_CFGR_WAVPOL`		21	Waveform shape polarity
`LPTIM_CFGR_PRELOAD`		22	Reg update mode
`LPTIM_CFGR_COUNTMODE`		23	Counter mode enable
`LPTIM_CFGR_ENC`		24	Encoder mode enable
`CR`	`0x10`	32	LPTIM Control register
`LPTIM_CR_ENABLE`		0	LPTIMer enable
`LPTIM_CR_SNGSTRT`		1	Timer start in single mode
`LPTIM_CR_CNTSTRT`		2	Timer start in continuous mode
`LPTIM_CR_COUNTRST`		3	Counter reset
`LPTIM_CR_RSTARE`		4	Reset after read enable
`CMP`	`0x14`	32	LPTIM Compare register
`LPTIM_CMP_CMP`		0:15	Compare register
`ARR`	`0x18`	32	LPTIM Autoreload register
`LPTIM_ARR_ARR`		0:15	Auto reload register
`CNT`	`0x1C`	32	LPTIM Counter register
`LPTIM_CNT_CNT`		0:15	Counter register
`OR`	`0x20`	32	LPTIM Option register
`LPTIM_OR_OR`		0:1	OR[1:0] bits (Remap selection)
`RCR`	`0x28`	32	LPTIM Repetition counter register
`LPTIM_RCR_REP`		0:7	Repetition Counter Value

ADC — ADC (section 14)

Register	Offset	Bits	Purpose
`ISR`	`0x00`	32	ADC interrupt and status register
`ADC_ISR_ADRDY`		0	ADC ready flag
`ADC_ISR_EOSMP`		1	ADC group regular end of sampling flag
`ADC_ISR_EOC`		2	ADC group regular end of unitary conversion flag
`ADC_ISR_EOS`		3	ADC group regular end of sequence conversions flag
`ADC_ISR_OVR`		4	ADC group regular overrun flag
`ADC_ISR_JEOC`		5	ADC group injected end of unitary conversion flag
`ADC_ISR_JEOS`		6	ADC group injected end of sequence conversions flag
`ADC_ISR_AWD1`		7	ADC analog watchdog 1 flag
`ADC_ISR_AWD2`		8	ADC analog watchdog 2 flag
`ADC_ISR_AWD3`		9	ADC analog watchdog 3 flag
`ADC_ISR_JQOVF`		10	ADC group injected contexts queue overflow flag
`IER`	`0x04`	32	ADC interrupt enable register
`ADC_IER_ADRDYIE`		0	ADC ready interrupt
`ADC_IER_EOSMPIE`		1	ADC group regular end of sampling interrupt
`ADC_IER_EOCIE`		2	ADC group regular end of unitary conversion interrupt
`ADC_IER_EOSIE`		3	ADC group regular end of sequence conversions interrupt
`ADC_IER_OVRIE`		4	ADC group regular overrun interrupt
`ADC_IER_JEOCIE`		5	ADC group injected end of unitary conversion interrupt
`ADC_IER_JEOSIE`		6	ADC group injected end of sequence conversions interrupt
`ADC_IER_AWD1IE`		7	ADC analog watchdog 1 interrupt
`ADC_IER_AWD2IE`		8	ADC analog watchdog 2 interrupt
`ADC_IER_AWD3IE`		9	ADC analog watchdog 3 interrupt
`ADC_IER_JQOVFIE`		10	ADC group injected contexts queue overflow interrupt
`CR`	`0x08`	32	ADC control register
`ADC_CR_ADEN`		0	ADC enable
`ADC_CR_ADDIS`		1	ADC disable
`ADC_CR_ADSTART`		2	ADC group regular conversion start
`ADC_CR_JADSTART`		3	ADC group injected conversion start
`ADC_CR_ADSTP`		4	ADC group regular conversion stop
`ADC_CR_JADSTP`		5	ADC group injected conversion stop
`ADC_CR_ADVREGEN`		28	ADC voltage regulator enable
`ADC_CR_DEEPPWD`		29	ADC deep power down enable
`ADC_CR_ADCALDIF`		30	ADC differential mode for calibration
`ADC_CR_ADCAL`		31	ADC calibration
`CFGR`	`0x0C`	32	ADC configuration register 1
`ADC_CFGR_DMAEN`		0	ADC DMA transfer enable
`ADC_CFGR_DMACFG`		1	ADC DMA transfer configuration
`ADC_CFGR_DFSDMCFG`		2	ADC DFSDM mode configuration
`ADC_CFGR_RES`		3:4	ADC data resolution
`ADC_CFGR_ALIGN`		5	ADC data alignment
`ADC_CFGR_EXTSEL`		6:9	ADC group regular external trigger source
`ADC_CFGR_EXTEN`		10:11	ADC group regular external trigger polarity
`ADC_CFGR_OVRMOD`		12	ADC group regular overrun configuration
`ADC_CFGR_CONT`		13	ADC group regular continuous conversion mode
`ADC_CFGR_AUTDLY`		14	ADC low power auto wait
`ADC_CFGR_DISCEN`		16	ADC group regular sequencer discontinuous mode
`ADC_CFGR_DISCNUM`		17:19	ADC group regular sequencer discontinuous number of ranks
`ADC_CFGR_JDISCEN`		20	ADC group injected sequencer discontinuous mode
`ADC_CFGR_JQM`		21	ADC group injected contexts queue mode
`ADC_CFGR_AWD1SGL`		22	ADC analog watchdog 1 monitoring a single channel or all channels
`ADC_CFGR_AWD1EN`		23	ADC analog watchdog 1 enable on scope ADC group regular
`ADC_CFGR_JAWD1EN`		24	ADC analog watchdog 1 enable on scope ADC group injected
`ADC_CFGR_JAUTO`		25	ADC group injected automatic trigger mode
`ADC_CFGR_AWD1CH`		26:30	ADC analog watchdog 1 monitored channel selection
`ADC_CFGR_JQDIS`		31	ADC group injected contexts queue disable
`CFGR2`	`0x10`	32	ADC configuration register 2
`ADC_CFGR2_ROVSE`		0	ADC oversampler enable on scope ADC group regular
`ADC_CFGR2_JOVSE`		1	ADC oversampler enable on scope ADC group injected
`ADC_CFGR2_OVSR`		2:4	ADC oversampling ratio
`ADC_CFGR2_OVSS`		5:8	ADC oversampling shift
`ADC_CFGR2_TROVS`		9	ADC oversampling discontinuous mode (triggered mode) for ADC group regular
`ADC_CFGR2_ROVSM`		10	ADC oversampling mode managing interlaced conversions of ADC group regular and group injected
`SMPR1`	`0x14`	32	ADC sampling time register 1
`ADC_SMPR1_SMP0`		0:2	ADC channel 0 sampling time selection
`ADC_SMPR1_SMP1`		3:5	ADC channel 1 sampling time selection
`ADC_SMPR1_SMP2`		6:8	ADC channel 2 sampling time selection
`ADC_SMPR1_SMP3`		9:11	ADC channel 3 sampling time selection
`ADC_SMPR1_SMP4`		12:14	ADC channel 4 sampling time selection
`ADC_SMPR1_SMP5`		15:17	ADC channel 5 sampling time selection
`ADC_SMPR1_SMP6`		18:20	ADC channel 6 sampling time selection
`ADC_SMPR1_SMP7`		21:23	ADC channel 7 sampling time selection
`ADC_SMPR1_SMP8`		24:26	ADC channel 8 sampling time selection
`ADC_SMPR1_SMP9`		27:29	ADC channel 9 sampling time selection
`ADC_SMPR1_SMPPLUS`		31	ADC channels sampling time additional setting
`SMPR2`	`0x18`	32	ADC sampling time register 2
`ADC_SMPR2_SMP10`		0:2	ADC channel 10 sampling time selection
`ADC_SMPR2_SMP11`		3:5	ADC channel 11 sampling time selection
`ADC_SMPR2_SMP12`		6:8	ADC channel 12 sampling time selection
`ADC_SMPR2_SMP13`		9:11	ADC channel 13 sampling time selection
`ADC_SMPR2_SMP14`		12:14	ADC channel 14 sampling time selection
`ADC_SMPR2_SMP15`		15:17	ADC channel 15 sampling time selection
`ADC_SMPR2_SMP16`		18:20	ADC channel 16 sampling time selection
`ADC_SMPR2_SMP17`		21:23	ADC channel 17 sampling time selection
`ADC_SMPR2_SMP18`		24:26	ADC channel 18 sampling time selection
`TR1`	`0x20`	32	ADC analog watchdog 1 threshold register
`ADC_TR1_LT1`		0:11	ADC analog watchdog 1 threshold low
`ADC_TR1_HT1`		16:27	ADC Analog watchdog 1 threshold high
`TR2`	`0x24`	32	ADC analog watchdog 2 threshold register
`ADC_TR2_LT2`		0:7	ADC analog watchdog 2 threshold low
`ADC_TR2_HT2`		16:23	ADC analog watchdog 2 threshold high
`TR3`	`0x28`	32	ADC analog watchdog 3 threshold register
`ADC_TR3_LT3`		0:7	ADC analog watchdog 3 threshold low
`ADC_TR3_HT3`		16:23	ADC analog watchdog 3 threshold high
`SQR1`	`0x30`	32	ADC group regular sequencer register 1
`ADC_SQR1_L`		0:3	ADC group regular sequencer scan length
`ADC_SQR1_SQ1`		6:10	ADC group regular sequencer rank 1
`ADC_SQR1_SQ2`		12:16	ADC group regular sequencer rank 2
`ADC_SQR1_SQ3`		18:22	ADC group regular sequencer rank 3
`ADC_SQR1_SQ4`		24:28	ADC group regular sequencer rank 4
`SQR2`	`0x34`	32	ADC group regular sequencer register 2
`ADC_SQR2_SQ5`		0:4	ADC group regular sequencer rank 5
`ADC_SQR2_SQ6`		6:10	ADC group regular sequencer rank 6
`ADC_SQR2_SQ7`		12:16	ADC group regular sequencer rank 7
`ADC_SQR2_SQ8`		18:22	ADC group regular sequencer rank 8
`ADC_SQR2_SQ9`		24:28	ADC group regular sequencer rank 9
`SQR3`	`0x38`	32	ADC group regular sequencer register 3
`ADC_SQR3_SQ10`		0:4	ADC group regular sequencer rank 10
`ADC_SQR3_SQ11`		6:10	ADC group regular sequencer rank 11
`ADC_SQR3_SQ12`		12:16	ADC group regular sequencer rank 12
`ADC_SQR3_SQ13`		18:22	ADC group regular sequencer rank 13
`ADC_SQR3_SQ14`		24:28	ADC group regular sequencer rank 14
`SQR4`	`0x3C`	32	ADC group regular sequencer register 4
`ADC_SQR4_SQ15`		0:4	ADC group regular sequencer rank 15
`ADC_SQR4_SQ16`		6:10	ADC group regular sequencer rank 16
`DR`	`0x40`	32	ADC group regular data register
`ADC_DR_RDATA`		0:15	ADC group regular conversion data
`JSQR`	`0x4C`	32	ADC group injected sequencer register
`ADC_JSQR_JL`		0:1	ADC group injected sequencer scan length
`ADC_JSQR_JEXTSEL`		2:5	ADC group injected external trigger source
`ADC_JSQR_JEXTEN`		6:7	ADC group injected external trigger polarity
`ADC_JSQR_JSQ1`		8:12	ADC group injected sequencer rank 1
`ADC_JSQR_JSQ2`		14:18	ADC group injected sequencer rank 2
`ADC_JSQR_JSQ3`		20:24	ADC group injected sequencer rank 3
`ADC_JSQR_JSQ4`		26:30	ADC group injected sequencer rank 4
`OFR1`	`0x60`	32	ADC offset register 1
`ADC_OFR1_OFFSET1`		0:11	ADC offset number 1 offset level
`ADC_OFR1_OFFSET1_CH`		26:30	ADC offset number 1 channel selection
`ADC_OFR1_OFFSET1_EN`		31	ADC offset number 1 enable
`OFR2`	`0x64`	32	ADC offset register 2
`ADC_OFR2_OFFSET2`		0:11	ADC offset number 2 offset level
`ADC_OFR2_OFFSET2_CH`		26:30	ADC offset number 2 channel selection
`ADC_OFR2_OFFSET2_EN`		31	ADC offset number 2 enable
`OFR3`	`0x68`	32	ADC offset register 3
`ADC_OFR3_OFFSET3`		0:11	ADC offset number 3 offset level
`ADC_OFR3_OFFSET3_CH`		26:30	ADC offset number 3 channel selection
`ADC_OFR3_OFFSET3_EN`		31	ADC offset number 3 enable
`OFR4`	`0x6C`	32	ADC offset register 4
`ADC_OFR4_OFFSET4`		0:11	ADC offset number 4 offset level
`ADC_OFR4_OFFSET4_CH`		26:30	ADC offset number 4 channel selection
`ADC_OFR4_OFFSET4_EN`		31	ADC offset number 4 enable
`JDR1`	`0x80`	32	ADC group injected rank 1 data register
`ADC_JDR1_JDATA`		0:15	ADC group injected sequencer rank 1 conversion data
`JDR2`	`0x84`	32	ADC group injected rank 2 data register
`ADC_JDR2_JDATA`		0:15	ADC group injected sequencer rank 2 conversion data
`JDR3`	`0x88`	32	ADC group injected rank 3 data register
`ADC_JDR3_JDATA`		0:15	ADC group injected sequencer rank 3 conversion data
`JDR4`	`0x8C`	32	ADC group injected rank 4 data register
`ADC_JDR4_JDATA`		0:15	ADC group injected sequencer rank 4 conversion data
`AWD2CR`	`0xA0`	32	ADC analog watchdog 1 configuration register
`ADC_AWD2CR_AWD2CH`		0:18	ADC analog watchdog 2 monitored channel selection
`AWD3CR`	`0xA4`	32	ADC analog watchdog 3 Configuration Register
`ADC_AWD3CR_AWD3CH`		0:18	ADC analog watchdog 3 monitored channel selection
`DIFSEL`	`0xB0`	32	ADC differential mode selection register
`ADC_DIFSEL_DIFSEL`		0:18	ADC channel differential or single-ended mode
`CALFACT`	`0xB4`	32	ADC calibration factors
`ADC_CALFACT_CALFACT_S`		0:6	ADC calibration factor in single-ended mode
`ADC_CALFACT_CALFACT_D`		16:22	ADC calibration factor in differential mode

ADC_Common — ADC: common registers (section 14)

Register	Offset	Bits	Purpose
`CSR`	`0x00`	32	ADC common status register
`ADC_CSR_ADRDY_MST`		0	ADC multimode master ready flag
`ADC_CSR_EOSMP_MST`		1	ADC multimode master group regular end of sampling flag
`ADC_CSR_EOC_MST`		2	ADC multimode master group regular end of unitary conversion flag
`ADC_CSR_EOS_MST`		3	ADC multimode master group regular end of sequence conversions flag
`ADC_CSR_OVR_MST`		4	ADC multimode master group regular overrun flag
`ADC_CSR_JEOC_MST`		5	ADC multimode master group injected end of unitary conversion flag
`ADC_CSR_JEOS_MST`		6	ADC multimode master group injected end of sequence conversions flag
`ADC_CSR_AWD1_MST`		7	ADC multimode master analog watchdog 1 flag
`ADC_CSR_AWD2_MST`		8	ADC multimode master analog watchdog 2 flag
`ADC_CSR_AWD3_MST`		9	ADC multimode master analog watchdog 3 flag
`ADC_CSR_JQOVF_MST`		10	ADC multimode master group injected contexts queue overflow flag
`ADC_CSR_ADRDY_SLV`		16	ADC multimode slave ready flag
`ADC_CSR_EOSMP_SLV`		17	ADC multimode slave group regular end of sampling flag
`ADC_CSR_EOC_SLV`		18	ADC multimode slave group regular end of unitary conversion flag
`ADC_CSR_EOS_SLV`		19	ADC multimode slave group regular end of sequence conversions flag
`ADC_CSR_OVR_SLV`		20	ADC multimode slave group regular overrun flag
`ADC_CSR_JEOC_SLV`		21	ADC multimode slave group injected end of unitary conversion flag
`ADC_CSR_JEOS_SLV`		22	ADC multimode slave group injected end of sequence conversions flag
`ADC_CSR_AWD1_SLV`		23	ADC multimode slave analog watchdog 1 flag
`ADC_CSR_AWD2_SLV`		24	ADC multimode slave analog watchdog 2 flag
`ADC_CSR_AWD3_SLV`		25	ADC multimode slave analog watchdog 3 flag
`ADC_CSR_JQOVF_SLV`		26	ADC multimode slave group injected contexts queue overflow flag
`CCR`	`0x08`	32	ADC common configuration register
`ADC_CCR_DUAL`		0:4	ADC multimode mode selection
`ADC_CCR_DELAY`		8:11	ADC multimode delay between 2 sampling phases
`ADC_CCR_DMACFG`		13	ADC multimode DMA transfer configuration
`ADC_CCR_MDMA`		14:15	ADC multimode DMA transfer enable
`ADC_CCR_CKMODE`		16:17	ADC common clock source and prescaler (prescaler only for clock source synchronous)
`ADC_CCR_PRESC`		18:21	ADC common clock prescaler, only for clock source asynchronous
`ADC_CCR_VREFEN`		22	ADC internal path to VrefInt enable
`ADC_CCR_TSEN`		23	ADC internal path to temperature sensor enable
`ADC_CCR_VBATEN`		24	ADC internal path to battery voltage enable
`CDR`	`0x0C`	32	ADC common group regular data register
`ADC_CDR_RDATA_MST`		0:15	ADC multimode master group regular conversion data
`ADC_CDR_RDATA_SLV`		16:31	ADC multimode slave group regular conversion data

DAC — DAC (section 15)

Register	Offset	Bits	Purpose
`CR`	`0x00`	32	DAC control register
`DAC_CR_EN1`		0	DAC channel1 enable
`DAC_CR_TEN1`		1	DAC channel1 Trigger enable
`DAC_CR_TSEL1`		2:5	TSEL1[3:0] (DAC channel1 Trigger selection)
`DAC_CR_WAVE1`		6:7	WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable)
`DAC_CR_MAMP1`		8:11	MAMP1[3:0] (DAC channel1 Mask/Amplitude selector)
`DAC_CR_DMAEN1`		12	DAC channel1 DMA enable
`DAC_CR_DMAUDRIE1`		13	DAC channel 1 DMA underrun interrupt enable >
`DAC_CR_CEN1`		14	DAC channel 1 calibration enable >
`DAC_CR_HFSEL`		15	DAC channel 1 and 2 high frequency mode enable >
`DAC_CR_EN2`		16	DAC channel2 enable
`DAC_CR_TEN2`		17	DAC channel2 Trigger enable
`DAC_CR_TSEL2`		18:21	TSEL2[3:0] (DAC channel2 Trigger selection)
`DAC_CR_WAVE2`		22:23	WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable)
`DAC_CR_MAMP2`		24:27	MAMP2[3:0] (DAC channel2 Mask/Amplitude selector)
`DAC_CR_DMAEN2`		28	DAC channel2 DMA enabled
`DAC_CR_DMAUDRIE2`		29	DAC channel2 DMA underrun interrupt enable >
`DAC_CR_CEN2`		30	DAC channel2 calibration enable >
`SWTRIGR`	`0x04`	32	DAC software trigger register
`DAC_SWTRIGR_SWTRIG1`		0	DAC channel1 software trigger
`DAC_SWTRIGR_SWTRIG2`		1	DAC channel2 software trigger
`DHR12R1`	`0x08`	32	DAC channel1 12-bit right-aligned data holding register
`DAC_DHR12R1_DACC1DHR`		0:11	DAC channel1 12-bit Right aligned data
`DHR12L1`	`0x0C`	32	DAC channel1 12-bit left aligned data holding register
`DAC_DHR12L1_DACC1DHR`		4:15	DAC channel1 12-bit Left aligned data
`DHR8R1`	`0x10`	32	DAC channel1 8-bit right aligned data holding register
`DAC_DHR8R1_DACC1DHR`		0:7	DAC channel1 8-bit Right aligned data
`DHR12R2`	`0x14`	32	DAC channel2 12-bit right aligned data holding register
`DAC_DHR12R2_DACC2DHR`		0:11	DAC channel2 12-bit Right aligned data
`DHR12L2`	`0x18`	32	DAC channel2 12-bit left aligned data holding register
`DAC_DHR12L2_DACC2DHR`		4:15	DAC channel2 12-bit Left aligned data
`DHR8R2`	`0x1C`	32	DAC channel2 8-bit right-aligned data holding register
`DAC_DHR8R2_DACC2DHR`		0:7	DAC channel2 8-bit Right aligned data
`DHR12RD`	`0x20`	32	Dual DAC 12-bit right-aligned data holding register
`DAC_DHR12RD_DACC1DHR`		0:11	DAC channel1 12-bit Right aligned data
`DAC_DHR12RD_DACC2DHR`		16:27	DAC channel2 12-bit Right aligned data
`DHR12LD`	`0x24`	32	DUAL DAC 12-bit left aligned data holding register
`DAC_DHR12LD_DACC1DHR`		4:15	DAC channel1 12-bit Left aligned data
`DAC_DHR12LD_DACC2DHR`		20:31	DAC channel2 12-bit Left aligned data
`DHR8RD`	`0x28`	32	DUAL DAC 8-bit right aligned data holding register
`DAC_DHR8RD_DACC1DHR`		0:7	DAC channel1 8-bit Right aligned data
`DAC_DHR8RD_DACC2DHR`		8:15	DAC channel2 8-bit Right aligned data
`DOR1`	`0x2C`	32	DAC channel1 data output register
`DAC_DOR1_DACC1DOR`		0:11	DAC channel1 data output
`DOR2`	`0x30`	32	DAC channel2 data output register
`DAC_DOR2_DACC2DOR`		0:11	DAC channel2 data output
`SR`	`0x34`	32	DAC status register
`DAC_SR_DMAUDR1`		13	DAC channel1 DMA underrun flag
`DAC_SR_CAL_FLAG1`		14	DAC channel1 calibration offset status
`DAC_SR_BWST1`		15	DAC channel1 busy writing sample time flag
`DAC_SR_DMAUDR2`		29	DAC channel2 DMA underrun flag
`DAC_SR_CAL_FLAG2`		30	DAC channel2 calibration offset status
`DAC_SR_BWST2`		31	DAC channel2 busy writing sample time flag
`CCR`	`0x38`	32	DAC calibration control register
`DAC_CCR_OTRIM1`		0:4	DAC channel1 offset trimming value
`DAC_CCR_OTRIM2`		16:20	DAC channel2 offset trimming value
`MCR`	`0x3C`	32	DAC mode control register
`DAC_MCR_MODE1`		0:2	MODE1[2:0] (DAC channel1 mode)
`DAC_MCR_MODE2`		16:18	MODE2[2:0] (DAC channel2 mode)
`SHSR1`	`0x40`	32	DAC Sample and Hold sample time register 1
`DAC_SHSR1_TSAMPLE1`		0:9	DAC channel1 sample time
`SHSR2`	`0x44`	32	DAC Sample and Hold sample time register 2
`DAC_SHSR2_TSAMPLE2`		0:9	DAC channel2 sample time
`SHHR`	`0x48`	32	DAC Sample and Hold hold time register
`DAC_SHHR_THOLD1`		0:9	DAC channel1 hold time
`DAC_SHHR_THOLD2`		16:25	DAC channel2 hold time
`SHRR`	`0x4C`	32	DAC Sample and Hold refresh time register
`DAC_SHRR_TREFRESH1`		0:7	DAC channel1 refresh time
`DAC_SHRR_TREFRESH2`		16:23	DAC channel2 refresh time

COMP — Comparator (section 44)

Register	Offset	Bits	Purpose
`CSR`	`0x00`	32	COMP control and status register
`COMP_CSR_EN`		0	Comparator enable
`COMP_CSR_PWRMODE`		2:3	Comparator power mode
`COMP_CSR_INMSEL`		4:6	Comparator input minus selection
`COMP_CSR_INPSEL`		7:8	Comparator input plus selection
`COMP_CSR_WINMODE`		9	Pair of comparators window mode. Bit intended to be used with COMP common instance (COMP_Common_TypeDef)
`COMP_CSR_POLARITY`		15	Comparator output polarity
`COMP_CSR_HYST`		16:17	Comparator hysteresis
`COMP_CSR_BLANKING`		18:20	Comparator blanking source
`COMP_CSR_BRGEN`		22	Comparator voltage scaler enable
`COMP_CSR_SCALEN`		23	Comparator scaler bridge enable
`COMP_CSR_VALUE`		30	Comparator output level
`COMP_CSR_LOCK`		31	Comparator lock

OPAMP — Operational amplifier (section 44)

Register	Offset	Bits	Purpose
`CSR`	`0x00`	32	OPAMP control/status register
`OPAMP_CSR_OPAMPxEN`		0	OPAMP enable
`OPAMP_CSR_OPALPM`		1	Operational amplifier Low Power Mode
`OPAMP_CSR_OPAMODE`		2:3	Operational amplifier PGA mode
`OPAMP_CSR_PGGAIN`		4:5	Operational amplifier Programmable amplifier gain value
`OPAMP_CSR_VMSEL`		8:9	Inverting input selection
`OPAMP_CSR_VPSEL`		10	Non inverted input selection
`OPAMP_CSR_CALON`		12	Calibration mode enable
`OPAMP_CSR_CALSEL`		13	Calibration selection
`OPAMP_CSR_USERTRIM`		14	User trimming enable
`OPAMP_CSR_CALOUT`		15	Operational amplifier1 calibration output
`OTR`	`0x04`	32	OPAMP offset trimming register for normal mode
`OPAMP_OTR_TRIMOFFSETN`		0:4	Trim for NMOS differential pairs
`OPAMP_OTR_TRIMOFFSETP`		8:12	Trim for PMOS differential pairs
`LPOTR`	`0x08`	32	OPAMP offset trimming register for low power mode
`OPAMP_LPOTR_TRIMLPOFFSETN`		0:4	Trim for NMOS differential pairs
`OPAMP_LPOTR_TRIMLPOFFSETP`		8:12	Trim for PMOS differential pairs

USART — UART / USART / LPUART (section 16)

Register	Offset	Bits	Purpose
`CR1`	`0x00`	32	USART Control register 1
`USART_CR1_UE`		0	USART Enable
`USART_CR1_UESM`		1	USART Enable in STOP Mode
`USART_CR1_RE`		2	Receiver Enable
`USART_CR1_TE`		3	Transmitter Enable
`USART_CR1_IDLEIE`		4	IDLE Interrupt Enable
`USART_CR1_RXNEIE`		5	RXNE Interrupt Enable
`USART_CR1_TCIE`		6	Transmission Complete Interrupt Enable
`USART_CR1_TXEIE`		7	TXE Interrupt Enable
`USART_CR1_TXEIE_TXFNFIE`		7
`USART_CR1_PEIE`		8	PE Interrupt Enable
`USART_CR1_PS`		9	Parity Selection
`USART_CR1_PCE`		10	Parity Control Enable
`USART_CR1_WAKE`		11	Receiver Wakeup method
`USART_CR1_M0`		12	Word length - Bit 0
`USART_CR1_MME`		13	Mute Mode Enable
`USART_CR1_CMIE`		14	Character match interrupt enable
`USART_CR1_OVER8`		15	Oversampling by 8-bit or 16-bit mode
`USART_CR1_DEDT`		16:20	DEDT[4:0] bits (Driver Enable Deassertion Time)
`USART_CR1_DEAT`		21:25	DEAT[4:0] bits (Driver Enable Assertion Time)
`USART_CR1_RTOIE`		26	Receive Time Out Interrupt Enable
`USART_CR1_EOBIE`		27	End of Block Interrupt Enable
`USART_CR1_M1`		28	Word length - Bit 1
`USART_CR1_FIFOEN`		29	FIFO mode enable
`USART_CR1_TXFEIE`		30	TX FIFO Empty Interrupt Enable
`USART_CR1_RXFFIE`		31	RX FIFO Full Interrupt Enable
`CR2`	`0x04`	32	USART Control register 2
`USART_CR2_SLVEN`		0	Synchronous Slave mode enable
`USART_CR2_DIS_NSS`		3	Slave Select (NSS) pin management
`USART_CR2_ADDM7`		4	7-bit or 4-bit Address Detection
`USART_CR2_LBDL`		5	LIN Break Detection Length
`USART_CR2_LBDIE`		6	LIN Break Detection Interrupt Enable
`USART_CR2_LBCL`		8	Last Bit Clock pulse
`USART_CR2_CPHA`		9	Clock Phase
`USART_CR2_CPOL`		10	Clock Polarity
`USART_CR2_CLKEN`		11	Clock Enable
`USART_CR2_STOP`		12:13	STOP[1:0] bits (STOP bits)
`USART_CR2_LINEN`		14	LIN mode enable
`USART_CR2_SWAP`		15	SWAP TX/RX pins
`USART_CR2_RXINV`		16	RX pin active level inversion
`USART_CR2_TXINV`		17	TX pin active level inversion
`USART_CR2_DATAINV`		18	Binary data inversion
`USART_CR2_MSBFIRST`		19	Most Significant Bit First
`USART_CR2_ABREN`		20	Auto Baud-Rate Enable
`USART_CR2_ABRMODE`		21:22	ABRMOD[1:0] bits (Auto Baud-Rate Mode)
`USART_CR2_RTOEN`		23	Receiver Time-Out enable
`USART_CR2_ADD`		24:31	Address of the USART node
`CR3`	`0x08`	32	USART Control register 3
`USART_CR3_EIE`		0	Error Interrupt Enable
`USART_CR3_IREN`		1	IrDA mode Enable
`USART_CR3_IRLP`		2	IrDA Low-Power
`USART_CR3_HDSEL`		3	Half-Duplex Selection
`USART_CR3_NACK`		4	SmartCard NACK enable
`USART_CR3_SCEN`		5	SmartCard mode enable
`USART_CR3_DMAR`		6	DMA Enable Receiver
`USART_CR3_DMAT`		7	DMA Enable Transmitter
`USART_CR3_RTSE`		8	RTS Enable
`USART_CR3_CTSE`		9
`USART_CR3_CTSIE`		10	CTS Interrupt Enable
`USART_CR3_ONEBIT`		11	One sample bit method enable
`USART_CR3_OVRDIS`		12	Overrun Disable
`USART_CR3_DDRE`		13	DMA Disable on Reception Error
`USART_CR3_DEM`		14	Driver Enable Mode
`USART_CR3_DEP`		15	Driver Enable Polarity Selection
`USART_CR3_SCARCNT`		17:19	SCARCNT[2:0] bits (SmartCard Auto-Retry Count)
`USART_CR3_WUS`		20:21	WUS[1:0] bits (Wake UP Interrupt Flag Selection)
`USART_CR3_WUFIE`		22	Wake Up Interrupt Enable
`USART_CR3_TXFTIE`		23	TX FIFO Threshold Interrupt Enable
`USART_CR3_TCBGTIE`		24	Transmission Complete Before Guard Time Interrupt Enable
`USART_CR3_RXFTCFG`		25:27	RX FIFO Threshold Configuration
`USART_CR3_RXFTIE`		28	RX FIFO Threshold Interrupt Enable
`USART_CR3_TXFTCFG`		29:31	TX FIFO Threshold configuration
`BRR`	`0x0C`	32	USART Baud rate register
`GTPR`	`0x10`	32	USART Guard time and prescaler register
`USART_GTPR_PSC`		0:7	PSC[7:0] bits (Prescaler value)
`USART_GTPR_GT`		8:15	GT[7:0] bits (Guard time value)
`RTOR`	`0x14`	32	USART Receiver Time Out register
`USART_RTOR_RTO`		0:23	Receiver Timeout Value
`USART_RTOR_BLEN`		24:31	Block Length
`RQR`	`0x18`	32	USART Request register
`USART_RQR_ABRRQ`		0	Auto-Baud Rate Request
`USART_RQR_SBKRQ`		1	Send Break Request
`USART_RQR_MMRQ`		2	Mute Mode Request
`USART_RQR_RXFRQ`		3	Receive Data flush Request
`USART_RQR_TXFRQ`		4	Transmit Data flush Request
`ISR`	`0x1C`	32	USART Interrupt and status register
`USART_ISR_PE`		0	Parity Error
`USART_ISR_FE`		1	Framing Error
`USART_ISR_NE`		2	START bit Noise Error detection Flag
`USART_ISR_ORE`		3	OverRun Error
`USART_ISR_IDLE`		4	IDLE line detected
`USART_ISR_RXNE`		5	Read Data Register Not Empty
`USART_ISR_TC`		6	Transmission Complete
`USART_ISR_TXE`		7	Transmit Data Register Empty
`USART_ISR_LBDF`		8	LIN Break Detection Flag
`USART_ISR_CTSIF`		9	CTS interrupt Flag
`USART_ISR_CTS`		10	CTS Flag
`USART_ISR_RTOF`		11	Receiver Timeout
`USART_ISR_EOBF`		12	End Of Block Flag
`USART_ISR_UDR`		13	SPI Slave Underrun error Flag
`USART_ISR_ABRE`		14	Auto-Baud Rate Error
`USART_ISR_ABRF`		15	Auto-Baud Rate Flag
`USART_ISR_BUSY`		16	Busy Flag
`USART_ISR_CMF`		17	Character Match Flag
`USART_ISR_SBKF`		18	Send Break Flag
`USART_ISR_RWU`		19	Receive Wake Up from mute mode Flag
`USART_ISR_WUF`		20	Wake Up from stop mode Flag
`USART_ISR_TEACK`		21	Transmit Enable Acknowledge Flag
`USART_ISR_REACK`		22	Receive Enable Acknowledge Flag
`USART_ISR_TXFE`		23	TX FIFO Empty Flag
`USART_ISR_RXFF`		24	RX FIFO Full Flag
`USART_ISR_TCBGT`		25	Transmission Complete Before Guard Time completion
`USART_ISR_RXFT`		26	RX FIFO Threshold Flag
`USART_ISR_TXFT`		27	TX FIFO Threshold Flag
`ICR`	`0x20`	32	USART Interrupt flag Clear register
`USART_ICR_PECF`		0	Parity Error Clear Flag
`USART_ICR_FECF`		1	Framing Error Clear Flag
`USART_ICR_NECF`		2	Noise Error detected Clear Flag
`USART_ICR_ORECF`		3	OverRun Error Clear Flag
`USART_ICR_IDLECF`		4	IDLE line detected Clear Flag
`USART_ICR_TXFECF`		5	TX FIFO Empty Clear Flag
`USART_ICR_TCCF`		6	Transmission Complete Clear Flag
`USART_ICR_TCBGTCF`		7	Transmission Complete Before Guard Time Clear Flag
`USART_ICR_LBDCF`		8	LIN Break Detection Clear Flag
`USART_ICR_CTSCF`		9	CTS Interrupt Clear Flag
`USART_ICR_RTOCF`		11	Receiver Time Out Clear Flag
`USART_ICR_EOBCF`		12	End Of Block Clear Flag
`USART_ICR_UDRCF`		13	SPI Slave Underrun Clear Flag
`USART_ICR_CMCF`		17	Character Match Clear Flag
`USART_ICR_WUCF`		20	Wake Up from stop mode Clear Flag
`RDR`	`0x24`	32	USART Receive Data register
`USART_RDR_RDR`		0:8	RDR[8:0] bits (Receive Data value)
`TDR`	`0x28`	32	USART Transmit Data register
`USART_TDR_TDR`		0:8	TDR[8:0] bits (Transmit Data value)
`PRESC`	`0x2C`	32	USART Prescaler register
`USART_PRESC_PRESCALER`		0:3	PRESCALER[3:0] bits (Clock prescaler)

I2C — I²C (section 17)

Register	Offset	Bits	Purpose
`CR1`	`0x00`	32	I2C Control register 1
`I2C_CR1_PE`		0	Peripheral enable
`I2C_CR1_TXIE`		1	TX interrupt enable
`I2C_CR1_RXIE`		2	RX interrupt enable
`I2C_CR1_ADDRIE`		3	Address match interrupt enable
`I2C_CR1_NACKIE`		4	NACK received interrupt enable
`I2C_CR1_STOPIE`		5	STOP detection interrupt enable
`I2C_CR1_TCIE`		6	Transfer complete interrupt enable
`I2C_CR1_ERRIE`		7	Errors interrupt enable
`I2C_CR1_DNF`		8:11	Digital noise filter
`I2C_CR1_ANFOFF`		12	Analog noise filter OFF
`I2C_CR1_SWRST`		13	Software reset
`I2C_CR1_TXDMAEN`		14	DMA transmission requests enable
`I2C_CR1_RXDMAEN`		15	DMA reception requests enable
`I2C_CR1_SBC`		16	Slave byte control
`I2C_CR1_NOSTRETCH`		17	Clock stretching disable
`I2C_CR1_WUPEN`		18	Wakeup from STOP enable
`I2C_CR1_GCEN`		19	General call enable
`I2C_CR1_SMBHEN`		20	SMBus host address enable
`I2C_CR1_SMBDEN`		21	SMBus device default address enable
`I2C_CR1_ALERTEN`		22	SMBus alert enable
`I2C_CR1_PECEN`		23	PEC enable
`CR2`	`0x04`	32	I2C Control register 2
`I2C_CR2_SADD`		0:9	Slave address (master mode)
`I2C_CR2_RD_WRN`		10	Transfer direction (master mode)
`I2C_CR2_ADD10`		11	10-bit addressing mode (master mode)
`I2C_CR2_HEAD10R`		12	10-bit address header only read direction (master mode)
`I2C_CR2_START`		13	START generation
`I2C_CR2_STOP`		14	STOP generation (master mode)
`I2C_CR2_NACK`		15	NACK generation (slave mode)
`I2C_CR2_NBYTES`		16:23	Number of bytes
`I2C_CR2_RELOAD`		24	NBYTES reload mode
`I2C_CR2_AUTOEND`		25	Automatic end mode (master mode)
`I2C_CR2_PECBYTE`		26	Packet error checking byte
`OAR1`	`0x08`	32	I2C Own address 1 register
`I2C_OAR1_OA1`		0:9	Interface own address 1
`I2C_OAR1_OA1MODE`		10	Own address 1 10-bit mode
`I2C_OAR1_OA1EN`		15	Own address 1 enable
`OAR2`	`0x0C`	32	I2C Own address 2 register
`I2C_OAR2_OA2`		1:7	Interface own address 2
`I2C_OAR2_OA2MSK`		8:10	Own address 2 masks
`I2C_OAR2_OA2MASK01`		8	OA2[1] is masked, Only OA2[7:2] are compared
`I2C_OAR2_OA2MASK03`		8:9	OA2[3:1] is masked, Only OA2[7:4] are compared
`I2C_OAR2_OA2MASK05`		8:10	OA2[5:1] is masked, Only OA2[7:6] are compared
`I2C_OAR2_OA2MASK07`		8:10	OA2[7:1] is masked, No comparison is done
`I2C_OAR2_OA2MASK02`		9	OA2[2:1] is masked, Only OA2[7:3] are compared
`I2C_OAR2_OA2MASK06`		9:10	OA2[6:1] is masked, Only OA2[7] are compared
`I2C_OAR2_OA2MASK04`		10	OA2[4:1] is masked, Only OA2[7:5] are compared
`I2C_OAR2_OA2EN`		15	Own address 2 enable
`TIMINGR`	`0x10`	32	I2C Timing register
`I2C_TIMINGR_SCLL`		0:7	SCL low period (master mode)
`I2C_TIMINGR_SCLH`		8:15	SCL high period (master mode)
`I2C_TIMINGR_SDADEL`		16:19	Data hold time
`I2C_TIMINGR_SCLDEL`		20:23	Data setup time
`I2C_TIMINGR_PRESC`		28:31	Timings prescaler
`TIMEOUTR`	`0x14`	32	I2C Timeout register
`I2C_TIMEOUTR_TIMEOUTA`		0:11	Bus timeout A
`I2C_TIMEOUTR_TIDLE`		12	Idle clock timeout detection
`I2C_TIMEOUTR_TIMOUTEN`		15	Clock timeout enable
`I2C_TIMEOUTR_TIMEOUTB`		16:27	Bus timeout B
`I2C_TIMEOUTR_TEXTEN`		31	Extended clock timeout enable
`ISR`	`0x18`	32	I2C Interrupt and status register
`I2C_ISR_TXE`		0	Transmit data register empty
`I2C_ISR_TXIS`		1	Transmit interrupt status
`I2C_ISR_RXNE`		2	Receive data register not empty
`I2C_ISR_ADDR`		3	Address matched (slave mode)
`I2C_ISR_NACKF`		4	NACK received flag
`I2C_ISR_STOPF`		5	STOP detection flag
`I2C_ISR_TC`		6	Transfer complete (master mode)
`I2C_ISR_TCR`		7	Transfer complete reload
`I2C_ISR_BERR`		8	Bus error
`I2C_ISR_ARLO`		9	Arbitration lost
`I2C_ISR_OVR`		10	Overrun/Underrun
`I2C_ISR_PECERR`		11	PEC error in reception
`I2C_ISR_TIMEOUT`		12	Timeout or Tlow detection flag
`I2C_ISR_ALERT`		13	SMBus alert
`I2C_ISR_BUSY`		15	Bus busy
`I2C_ISR_DIR`		16	Transfer direction (slave mode)
`I2C_ISR_ADDCODE`		17:23	Address match code (slave mode)
`ICR`	`0x1C`	32	I2C Interrupt clear register
`I2C_ICR_ADDRCF`		3	Address matched clear flag
`I2C_ICR_NACKCF`		4	NACK clear flag
`I2C_ICR_STOPCF`		5	STOP detection clear flag
`I2C_ICR_BERRCF`		8	Bus error clear flag
`I2C_ICR_ARLOCF`		9	Arbitration lost clear flag
`I2C_ICR_OVRCF`		10	Overrun/Underrun clear flag
`I2C_ICR_PECCF`		11	PAC error clear flag
`I2C_ICR_TIMOUTCF`		12	Timeout clear flag
`I2C_ICR_ALERTCF`		13	Alert clear flag
`PECR`	`0x20`	32	I2C PEC register
`I2C_PECR_PEC`		0:7	PEC register
`RXDR`	`0x24`	32	I2C Receive data register
`I2C_RXDR_RXDATA`		0:7	8-bit receive data
`TXDR`	`0x28`	32	I2C Transmit data register
`I2C_TXDR_TXDATA`		0:7	8-bit transmit data

SPI — SPI / I²S (section 18)

Register	Offset	Bits	Purpose
`CR1`	`0x00`	32	SPI Control register 1
`SPI_CR1_CPHA`		0	Clock Phase
`SPI_CR1_CPOL`		1	Clock Polarity
`SPI_CR1_MSTR`		2	Master Selection
`SPI_CR1_BR`		3:5	BR[2:0] bits (Baud Rate Control)
`SPI_CR1_SPE`		6	SPI Enable
`SPI_CR1_LSBFIRST`		7	Frame Format
`SPI_CR1_SSI`		8	Internal slave select
`SPI_CR1_SSM`		9	Software slave management
`SPI_CR1_RXONLY`		10	Receive only
`SPI_CR1_CRCL`		11	CRC Length
`SPI_CR1_CRCNEXT`		12	Transmit CRC next
`SPI_CR1_CRCEN`		13	Hardware CRC calculation enable
`SPI_CR1_BIDIOE`		14	Output enable in bidirectional mode
`SPI_CR1_BIDIMODE`		15	Bidirectional data mode enable
`CR2`	`0x04`	32	SPI Control register 2
`SPI_CR2_RXDMAEN`		0	Rx Buffer DMA Enable
`SPI_CR2_TXDMAEN`		1	Tx Buffer DMA Enable
`SPI_CR2_SSOE`		2	SS Output Enable
`SPI_CR2_NSSP`		3	NSS pulse management Enable
`SPI_CR2_FRF`		4	Frame Format Enable
`SPI_CR2_ERRIE`		5	Error Interrupt Enable
`SPI_CR2_RXNEIE`		6	RX buffer Not Empty Interrupt Enable
`SPI_CR2_TXEIE`		7	Tx buffer Empty Interrupt Enable
`SPI_CR2_DS`		8:11	DS[3:0] Data Size
`SPI_CR2_FRXTH`		12	FIFO reception Threshold
`SPI_CR2_LDMARX`		13	Last DMA transfer for reception
`SPI_CR2_LDMATX`		14	Last DMA transfer for transmission
`SR`	`0x08`	32	SPI Status register
`SPI_SR_RXNE`		0	Receive buffer Not Empty
`SPI_SR_TXE`		1	Transmit buffer Empty
`SPI_SR_CRCERR`		4	CRC Error flag
`SPI_SR_MODF`		5	Mode fault
`SPI_SR_OVR`		6	Overrun flag
`SPI_SR_BSY`		7	Busy flag
`SPI_SR_FRE`		8	TI frame format error
`SPI_SR_FRLVL`		9:10	FIFO Reception Level
`SPI_SR_FTLVL`		11:12	FIFO Transmission Level
`DR`	`0x0C`	32	SPI data register
`SPI_DR_DR`		0:15	Data Register
`CRCPR`	`0x10`	32	SPI CRC polynomial register
`SPI_CRCPR_CRCPOLY`		0:15	CRC polynomial register
`RXCRCR`	`0x14`	32	SPI Rx CRC register
`SPI_RXCRCR_RXCRC`		0:15	Rx CRC Register
`TXCRCR`	`0x18`	32	SPI Tx CRC register
`SPI_TXCRCR_TXCRC`		0:15	Tx CRC Register

FDCAN — FDCAN (section 19)

Register	Offset	Bits	Purpose
`CREL`	`0x00`	32	FDCAN Core Release register
`FDCAN_CREL_DAY`		0:7	Timestamp Day
`FDCAN_CREL_MON`		8:15	Timestamp Month
`FDCAN_CREL_YEAR`		16:19	Timestamp Year
`FDCAN_CREL_SUBSTEP`		20:23	Sub-step of Core release
`FDCAN_CREL_STEP`		24:27	Step of Core release
`FDCAN_CREL_REL`		28:31	Core release
`ENDN`	`0x04`	32	FDCAN Endian register
`FDCAN_ENDN_ETV`		0:31	Endianness Test Value
`DBTP`	`0x0C`	32	FDCAN Data Bit Timing & Prescaler register
`FDCAN_DBTP_DSJW`		0:3	Synchronization Jump Width
`FDCAN_DBTP_DTSEG2`		4:7	Data time segment after sample point
`FDCAN_DBTP_DTSEG1`		8:12	Data time segment before sample point
`FDCAN_DBTP_DBRP`		16:20	Data BIt Rate Prescaler
`FDCAN_DBTP_TDC`		23	Transceiver Delay Compensation
`TEST`	`0x10`	32	FDCAN Test register
`FDCAN_TEST_LBCK`		4	Loop Back mode
`FDCAN_TEST_TX`		5:6	Control of Transmit Pin
`FDCAN_TEST_RX`		7	Receive Pin
`RWD`	`0x14`	32	FDCAN RAM Watchdog register
`FDCAN_RWD_WDC`		0:7	Watchdog configuration
`FDCAN_RWD_WDV`		8:15	Watchdog value
`CCCR`	`0x18`	32	FDCAN CC Control register
`FDCAN_CCCR_INIT`		0	Initialization
`FDCAN_CCCR_CCE`		1	Configuration Change Enable
`FDCAN_CCCR_ASM`		2	ASM Restricted Operation Mode
`FDCAN_CCCR_CSA`		3	Clock Stop Acknowledge
`FDCAN_CCCR_CSR`		4	Clock Stop Request
`FDCAN_CCCR_MON`		5	Bus Monitoring Mode
`FDCAN_CCCR_DAR`		6	Disable Automatic Retransmission
`FDCAN_CCCR_TEST`		7	Test Mode Enable
`FDCAN_CCCR_FDOE`		8	FD Operation Enable
`FDCAN_CCCR_BRSE`		9	FDCAN Bit Rate Switching
`FDCAN_CCCR_PXHD`		12	Protocol Exception Handling Disable
`FDCAN_CCCR_EFBI`		13	Edge Filtering during Bus Integration
`FDCAN_CCCR_TXP`		14	Two CAN bit times Pause
`FDCAN_CCCR_NISO`		15	Non ISO Operation
`NBTP`	`0x1C`	32	FDCAN Nominal Bit Timing & Prescaler register
`FDCAN_NBTP_NTSEG2`		0:6	Nominal Time segment after sample point
`FDCAN_NBTP_NTSEG1`		8:15	Nominal Time segment before sample point
`FDCAN_NBTP_NBRP`		16:24	Bit Rate Prescaler
`FDCAN_NBTP_NSJW`		25:31	Nominal (Re)Synchronization Jump Width
`TSCC`	`0x20`	32	FDCAN Timestamp Counter Configuration register
`FDCAN_TSCC_TSS`		0:1	Timestamp Select
`FDCAN_TSCC_TCP`		16:19	Timestamp Counter Prescaler
`TSCV`	`0x24`	32	FDCAN Timestamp Counter Value register
`FDCAN_TSCV_TSC`		0:15	Timestamp Counter
`TOCC`	`0x28`	32	FDCAN Timeout Counter Configuration register
`FDCAN_TOCC_ETOC`		0	Enable Timeout Counter
`FDCAN_TOCC_TOS`		1:2	Timeout Select
`FDCAN_TOCC_TOP`		16:31	Timeout Period
`TOCV`	`0x2C`	32	FDCAN Timeout Counter Value register
`FDCAN_TOCV_TOC`		0:15	Timeout Counter
`ECR`	`0x40`	32	FDCAN Error Counter register
`FDCAN_ECR_TEC`		0:7	Transmit Error Counter
`FDCAN_ECR_REC`		8:14	Receive Error Counter
`FDCAN_ECR_RP`		15	Receive Error Passive
`FDCAN_ECR_CEL`		16:23	CAN Error Logging
`PSR`	`0x44`	32	FDCAN Protocol Status register
`FDCAN_PSR_LEC`		0:2	Last Error Code
`FDCAN_PSR_ACT`		3:4	Activity
`FDCAN_PSR_EP`		5	Error Passive
`FDCAN_PSR_EW`		6	Warning Status
`FDCAN_PSR_BO`		7	Bus_Off Status
`FDCAN_PSR_DLEC`		8:10	Data Last Error Code
`FDCAN_PSR_RESI`		11	ESI flag of last received FDCAN Message
`FDCAN_PSR_RBRS`		12	BRS flag of last received FDCAN Message
`FDCAN_PSR_REDL`		13	Received FDCAN Message
`FDCAN_PSR_PXE`		14	Protocol Exception Event
`FDCAN_PSR_TDCV`		16:22	Transmitter Delay Compensation Value
`TDCR`	`0x48`	32	FDCAN Transmitter Delay Compensation register
`FDCAN_TDCR_TDCF`		0:6	Transmitter Delay Compensation Filter
`FDCAN_TDCR_TDCO`		8:14	Transmitter Delay Compensation Offset
`IR`	`0x50`	32	FDCAN Interrupt register
`FDCAN_IR_RF0N`		0	Rx FIFO 0 New Message
`FDCAN_IR_RF0F`		1	Rx FIFO 0 Full
`FDCAN_IR_RF0L`		2	Rx FIFO 0 Message Lost
`FDCAN_IR_RF1N`		3	Rx FIFO 1 New Message
`FDCAN_IR_RF1F`		4	Rx FIFO 1 Full
`FDCAN_IR_RF1L`		5	Rx FIFO 1 Message Lost
`FDCAN_IR_HPM`		6	High Priority Message
`FDCAN_IR_TC`		7	Transmission Completed
`FDCAN_IR_TCF`		8	Transmission Cancellation Finished
`FDCAN_IR_TFE`		9	Tx FIFO Empty
`FDCAN_IR_TEFN`		10	Tx Event FIFO New Entry
`FDCAN_IR_TEFF`		11	Tx Event FIFO Full
`FDCAN_IR_TEFL`		12	Tx Event FIFO Element Lost
`FDCAN_IR_TSW`		13	Timestamp Wraparound
`FDCAN_IR_MRAF`		14	Message RAM Access Failure
`FDCAN_IR_TOO`		15	Timeout Occurred
`FDCAN_IR_ELO`		16	Error Logging Overflow
`FDCAN_IR_EP`		17	Error Passive
`FDCAN_IR_EW`		18	Warning Status
`FDCAN_IR_BO`		19	Bus_Off Status
`FDCAN_IR_WDI`		20	Watchdog Interrupt
`FDCAN_IR_PEA`		21	Protocol Error in Arbitration Phase
`FDCAN_IR_PED`		22	Protocol Error in Data Phase
`FDCAN_IR_ARA`		23	Access to Reserved Address
`IE`	`0x54`	32	FDCAN Interrupt Enable register
`FDCAN_IE_RF0NE`		0	Rx FIFO 0 New Message Enable
`FDCAN_IE_RF0FE`		1	Rx FIFO 0 Full Enable
`FDCAN_IE_RF0LE`		2	Rx FIFO 0 Message Lost Enable
`FDCAN_IE_RF1NE`		3	Rx FIFO 1 New Message Enable
`FDCAN_IE_RF1FE`		4	Rx FIFO 1 Full Enable
`FDCAN_IE_RF1LE`		5	Rx FIFO 1 Message Lost Enable
`FDCAN_IE_HPME`		6	High Priority Message Enable
`FDCAN_IE_TCE`		7	Transmission Completed Enable
`FDCAN_IE_TCFE`		8	Transmission Cancellation Finished Enable
`FDCAN_IE_TFEE`		9	Tx FIFO Empty Enable
`FDCAN_IE_TEFNE`		10	Tx Event FIFO New Entry Enable
`FDCAN_IE_TEFFE`		11	Tx Event FIFO Full Enable
`FDCAN_IE_TEFLE`		12	Tx Event FIFO Element Lost Enable
`FDCAN_IE_TSWE`		13	Timestamp Wraparound Enable
`FDCAN_IE_MRAFE`		14	Message RAM Access Failure Enable
`FDCAN_IE_TOOE`		15	Timeout Occurred Enable
`FDCAN_IE_ELOE`		16	Error Logging Overflow Enable
`FDCAN_IE_EPE`		17	Error Passive Enable
`FDCAN_IE_EWE`		18	Warning Status Enable
`FDCAN_IE_BOE`		19	Bus_Off Status Enable
`FDCAN_IE_WDIE`		20	Watchdog Interrupt Enable
`FDCAN_IE_PEAE`		21	Protocol Error in Arbitration Phase Enable
`FDCAN_IE_PEDE`		22	Protocol Error in Data Phase Enable
`FDCAN_IE_ARAE`		23	Access to Reserved Address Enable
`ILS`	`0x58`	32	FDCAN Interrupt Line Select register
`FDCAN_ILS_RXFIFO0`		0
`FDCAN_ILS_RXFIFO1`		1
`FDCAN_ILS_SMSG`		2
`FDCAN_ILS_TFERR`		3
`FDCAN_ILS_MISC`		4
`FDCAN_ILS_BERR`		5
`FDCAN_ILS_PERR`		6
`ILE`	`0x5C`	32	FDCAN Interrupt Line Enable register
`FDCAN_ILE_EINT0`		0	Enable Interrupt Line 0
`FDCAN_ILE_EINT1`		1	Enable Interrupt Line 1
`RXGFC`	`0x80`	32	FDCAN Global Filter Configuration register
`FDCAN_RXGFC_RRFE`		0	Reject Remote Frames Extended
`FDCAN_RXGFC_RRFS`		1	Reject Remote Frames Standard
`FDCAN_RXGFC_ANFE`		2:3	Accept Non-matching Frames Extended
`FDCAN_RXGFC_ANFS`		4:5	Accept Non-matching Frames Standard
`FDCAN_RXGFC_F1OM`		8	FIFO 1 operation mode
`FDCAN_RXGFC_F0OM`		9	FIFO 0 operation mode
`FDCAN_RXGFC_LSS`		16:20	List Size Standard
`FDCAN_RXGFC_LSE`		24:27	List Size Extended
`XIDAM`	`0x84`	32	FDCAN Extended ID AND Mask register
`FDCAN_XIDAM_EIDM`		0:28	Extended ID Mask
`HPMS`	`0x88`	32	FDCAN High Priority Message Status register
`FDCAN_HPMS_BIDX`		0:2	Buffer Index
`FDCAN_HPMS_MSI`		6:7	Message Storage Indicator
`FDCAN_HPMS_FIDX`		8:12	Filter Index
`FDCAN_HPMS_FLST`		15	Filter List
`RXF0S`	`0x90`	32	FDCAN Rx FIFO 0 Status register
`FDCAN_RXF0S_F0FL`		0:3	Rx FIFO 0 Fill Level
`FDCAN_RXF0S_F0GI`		8:9	Rx FIFO 0 Get Index
`FDCAN_RXF0S_F0PI`		16:17	Rx FIFO 0 Put Index
`FDCAN_RXF0S_F0F`		24	Rx FIFO 0 Full
`FDCAN_RXF0S_RF0L`		25	Rx FIFO 0 Message Lost
`RXF0A`	`0x94`	32	FDCAN Rx FIFO 0 Acknowledge register
`FDCAN_RXF0A_F0AI`		0:2	Rx FIFO 0 Acknowledge Index
`RXF1S`	`0x98`	32	FDCAN Rx FIFO 1 Status register
`FDCAN_RXF1S_F1FL`		0:3	Rx FIFO 1 Fill Level
`FDCAN_RXF1S_F1GI`		8:9	Rx FIFO 1 Get Index
`FDCAN_RXF1S_F1PI`		16:17	Rx FIFO 1 Put Index
`FDCAN_RXF1S_F1F`		24	Rx FIFO 1 Full
`FDCAN_RXF1S_RF1L`		25	Rx FIFO 1 Message Lost
`RXF1A`	`0x9C`	32	FDCAN Rx FIFO 1 Acknowledge register
`FDCAN_RXF1A_F1AI`		0:2	Rx FIFO 1 Acknowledge Index
`TXBC`	`0xC0`	32	FDCAN Tx Buffer Configuration register
`FDCAN_TXBC_TFQM`		24	Tx FIFO/Queue Mode
`TXFQS`	`0xC4`	32	FDCAN Tx FIFO/Queue Status register
`FDCAN_TXFQS_TFFL`		0:2	Tx FIFO Free Level
`FDCAN_TXFQS_TFGI`		8:9	Tx FIFO Get Index
`FDCAN_TXFQS_TFQPI`		16:17	Tx FIFO/Queue Put Index
`FDCAN_TXFQS_TFQF`		21	Tx FIFO/Queue Full
`TXBRP`	`0xC8`	32	FDCAN Tx Buffer Request Pending register
`FDCAN_TXBRP_TRP`		0:2	Transmission Request Pending
`TXBAR`	`0xCC`	32	FDCAN Tx Buffer Add Request register
`FDCAN_TXBAR_AR`		0:2	Add Request
`TXBCR`	`0xD0`	32	FDCAN Tx Buffer Cancellation Request register
`FDCAN_TXBCR_CR`		0:2	Cancellation Request
`TXBTO`	`0xD4`	32	FDCAN Tx Buffer Transmission Occurred register
`FDCAN_TXBTO_TO`		0:2	Transmission Occurred
`TXBCF`	`0xD8`	32	FDCAN Tx Buffer Cancellation Finished register
`FDCAN_TXBCF_CF`		0:2	Cancellation Finished
`TXBTIE`	`0xDC`	32	FDCAN Tx Buffer Transmission Interrupt Enable register
`FDCAN_TXBTIE_TIE`		0:2	Transmission Interrupt Enable
`TXBCIE`	`0xE0`	32	FDCAN Tx Buffer Cancellation Finished Interrupt Enable register
`FDCAN_TXBCIE_CFIE`		0:2	Cancellation Finished Interrupt Enable
`TXEFS`	`0xE4`	32	FDCAN Tx Event FIFO Status register
`FDCAN_TXEFS_EFFL`		0:2	Event FIFO Fill Level
`FDCAN_TXEFS_EFGI`		8:9	Event FIFO Get Index
`FDCAN_TXEFS_EFPI`		16:17	Event FIFO Put Index
`FDCAN_TXEFS_EFF`		24	Event FIFO Full
`FDCAN_TXEFS_TEFL`		25	Tx Event FIFO Element Lost
`TXEFA`	`0xE8`	32	FDCAN Tx Event FIFO Acknowledge register
`FDCAN_TXEFA_EFAI`		0:1	Event FIFO Acknowledge Index

Open in the interactive handbook